Author: Admin

Posted on

Project Report On Automobile Breathalyzer

This Project Report On Automobile Breathalyzer is about Automobile Breathalyzer, which start with Introduction and expanded with other topics such as Design, Performance Requirement, Cost and Schedule. A breathalyzer is an electronic device made to estimate Blood Alcohol Content (BAC). Automobile Breathalyzers can detect blood alcohol levels of suspected drunk drivers.

project-report-on-automobile-breathalyzerAutomobile Breathalyzers are generally used by common law enforcement to catch drunken drivers on the road. As a fundamental rule, it is prohibited and illegal driving if your breath registers over 0.08% Blood Alcohol Content (BAC).Automobile Breathalyzers can be installed in cars for citizens who constantly are under the influence of alcohol.

If a Breath Alcohol Test indicates that a driver exceeds Illinois’s 0.08% Blood Alcohol Content (BAC) limit, the Automobile Breathalyzer will disable a car’s ignition. Ignition interlock device like a breathalyzer, fitted on vehicle’s dashboard. Before the vehicle’s engine started, the driver first must breathe out into the device; if the outcome Blood Alcohol Content (BAC) analyzed result is greater than the programmed Blood Alcohol Content (BAC)—usually 0.02% or 0.04%, the device prevents the engine from starting.

Testing Procedures:

A suspected drunk driver should breathe in the device. This sample is input directly into the device. The device determines and displays the Alcohol Source’s Blood Alcohol Content (BAC) the electrical representation of this result (e.g., voltage) is fed into the Signal Processor for further analysis. The Signal Processor consists of amplifiers to augment the output signal from the device and a microcontroller to regulate access to the ignition and to trigger appropriate messages to the user. Based on outputs from the microcontroller, it indicates the conditions as “Pass,” “Fail,” and “Warning.”

Conclusion:

The Automobile Breathalyzer is a very useful device to suspected drunk drivers and Automobile breathalyzers should be installed into all vehicles, which Protects the vehicle user, public, and property from damages and injury.

Download Final Year Project Report On Automobile Breathalyzer.

Posted on

Implementation Of Zoom Fft In Ultrasonic Blood Flow Analysis

This is Implementation Of Zoom Fft In Ultrasonic Blood Flow Analysis short report about Implementation of Zoom FFT in Ultrasonic Blood Flow Analysis. An adequate blood flow supply is necessary for all organs of the body.

Analysis of the blood flow finds its importance in the diagnoses of diseases. Zoom-FFT technique is simple and affordable to detect the blood clots and other diseases.

This is one of the geographic expeditions made for scanning the intra details of some specific objects using ultrasound named SONOGRAPHY, which is used as an alternative to x-ray photography.

In this report, the method to zoom the image or the scanned data-using zoom FFT has been discussed. It also explains the algorithm to get ZOOM FFT and how it can be obtained via simulation.

Blood flow analysis is done by passing a  high  frequency ultrasonic wave in the blood vessels through a transmitter. The reflected signal is passed to a DSP processor to find the frequency spectrum.  Because  of the high frequency of the ultrasonic wave, the resolution of the frequency spectrum  output will not be good.

In Zoom FFT technique a very small frequency change due to the clot formation can be obtained with a good resolution. It can be used to locate the initial presence of a blood clot.

This project report proposes the Study of Bio-medical signal processing, Mixing down the input signal to the baseband frequency using Hilbert Transform, Finding the down sampling using the decimation process, Obtaining the spectrum output using fast Fourier transform, Simulation is done by Mat lab/C, TMS320C5X/6X DSP processor does the real-time implementation.

Conclusion:

Currently, the  report has been tested on the simulation basis, the output of the simulations are satisfactory. Real-time experimentation is being done, using the Piezo electric ultrasonic transducer for verification purpose. The frequencies content from the media are obtained and currently, they are being transformed to image as 2D for visual perception.

Posted on

BIO Medical Engineering Project Report On Magic Monitor

This is a BIO Medical Engineering Project Report On Magic Monitor which produced by Biomedical Engineering Department. This project report consists of ten chapters. This Project, “MAGIC ICU Monitor”, is made to measure and observe different Vital signs using various electronic components.

In an addition to diagnosing some cardiovascular diseases by analyzing the data is being measured.

The aim of this advance ICU monitor is to give physicians in the ICU a pre-idea about the diagnosis of the case and suggested emergency required. This project measure blood pressure, pulse ox meter, human body temperature and detect ECG signal and display all these parameters.

There are 4 basic stages in this project which are the Hardware circuit’s stage, the software stage, display stage and finally new technology stage.

The introduction part of the Project mainly consists of 5 separate hardware circuits which are as follows:

1.         ECG Monitoring

2.         Pressure Monitoring

3.         Pulse ox meter

4.         Temperature Monitoring

5.         Serial Interface

The report also explains the details of the mobile interface which display monitor data on PC and define the process of input data for reading and display. The concept mobile technology contains system data flow which provides the details of client-server and HTTP protocol. The report explains the details of software and domain requirement specification.

Conclusion:

In this Engineering Project, the development of intensive care units made the care for more seriously sick patients possible. It allowed utilizing more technically oriented tools to monitor and get information instantly about any changes in the patient’s physiological parameters and developed new strategies to save a life.

On the other hand, it raised ethical and professional issues related to some patients who had untreatable medical conditions or those who sustained unsalvageable damage to their vital organs. The diagrams, flowcharts, and tables provide the complete idea about the MAGIC MONITOR, which helps to understand the concept clearly.

Posted on

Online E-Tender Management .Net Project

Online E-Tendering Management .net project is for B.tech final year Information technology students who are interested in developing web based application which is implemented in ASP.NET. The main idea for implementing this project is to replace existing manual tender system with computerized system. Online-E-TENDER-MANAGEMENT -Net-Project

In present situation tender system is performed manually which involves lot of manual work and which is a time involved process. Record maintenance is not accurate there are many chances of loss of data which will cause serious problems while preparing reports. In order to involve in tendering process people should travel a long way. As we know in long time manual process leads to lot of problems. 

As the information technology is growing widely there is lot of scope for finding solution for this problem by developing a web based project like Online e-Tender Management system which can resolve all these issues. 

This web application provides organizations to register with this system and upload tender details. Since this application is visible from all over the world clients can log into this site and apply for tenders and submit their quotations to the organizations on the project by filling a from through online.                  

Companies are informed as soon as clients apply for tender so organizations can contact clients for further information or they can communicate through this application.                 

For more information on this project you can download project report from this site for a free of cost. 

System specifications for developing Online e-tendering project. 

The system must have the following software requirements: 

Visual Basic .Net (version 2.0)

Visual Basic .Net Framework (version 2.0)

SQL Server 2000/2005

Download CSE Online E-Tendering Management .net project .

Posted on

Java Project for Online University Admission

Information Technology final year students who are interested in implementing web application using java as programming language  Online University admission project can help you for gaining knowledge. The main idea for implementing this project is to replace existing admission procedure in educational institutions with a computerized admission system for improving services in universities. Java-Project-for-Online-University-Admission

Purpose 

Online University admission project covers entire admission functionality starting from notifications, exam dates, college fees, and announcements. This project will help colleges to prepare statistical reports on admission activates on daily basis. This procedure can reduce work load on employees and also save lot of time. 

Using this application admissions can be carried out from any were which will be very helpful for students who are far away from the institution this can save money and time for students.

This admission procedure will reduce paper work and admission organization will be easy and in scheduled manner. Using this application will reduce man power. Using this application students can verify there marks and details with other colleges. 

Scope 

This application will provide different modules where each module has different role and permissions.

Admission notification will be uploaded to this site. Using these site students can apply through online or offline.

Certificate verification is done by interconnection with different education board’s agencies.

Online hall ticket issuing procedure.

Online admission system will save time for students.

Software Requirement Specification for developing Online University Admissions.

Software Requirements:

Operating System              :           Windows XP/2003 or Linux/Solaris

User Interface                :           HTML, CSS

Client-side Scripting         :           JavaScript

Programming Language          :           Java

Web Applications              :           JDBC, JNDI, Servlets, JSP

IDE/Workbench                 :           Eclipse with MyEclipse Plug-in

Database                      :           Access

Server Deployment             :           RetHat JBoss AS

Hardware Requirements:

Processor                     :           Pentium IV

Hard Disk                     :           40GB

RAM                           :           256MB

For more information on this project you can download project report from this site for a free of cost.

Download CSE Online University Admission  Project report .

Posted on

Civil Registry .Net Project

Civil Registry .Net project is for CSE and IT final year students who are interested in developing government related project using ASP.NET,C#,SOAP , HTTP protocol and SQL. The main idea for Implementing this project is to provide better services for citizens while applying for driving license, Voter’s ID card, PAN card, Passport  and provide online registration facilities like birth certificate, marriage certificate …Etc. Using this application can even reduce work load for government employees. Civil-Registry -Net-Project

Civil Registry .Net Project is a web based application which will work as government agency to provide better services to citizens. As mentioned above this application will help for citizens to applying and registering for various government certificates. 

             This project will a best option for replacing existing manual process which require lot of time and resources. Civil registry project can replace existing system to provide better customer care, takes less time, accuracy and even reduce corruption. This web based application will act as a government agency service through which public can know information about application process, application status which can save lot of time for public as well as government employees. 

      In present situation where Information technology field is growing fast, implementing and maintaining this project will not be big task. This project creates lot of space for adding more features in to this application. 

System specifications for developing Civil Registry project 

HARDWARE DESCRIPTION

      The selection of hardware is very important in the existence and proper working of any software. When selecting hardware, the size and requirements are also important. 

Minimum Requirements:

      Processor         :     Pentium II class, 450MHz

      RAM               :     128MB

      Hard Disk Drive   :     3GB

      Video             :     800X600, 256 colors

      CD-ROM            :     Required 

The proposed System is developed on:

      Processor         :     INTEL Pentium 4

      RAM               :     512MB

      Hard Disk Drive   :     40GB

      Key Board         :     Standard 101/102 or Digi Sync Family

      Monitor           :     Display Panel (1024 X 764)

      Display Adapter   :     Trident Super VGA

      Network Adapter   :     SMC Ethernet Card Elite 16 Ultra

      Mouse             :     Logitech Serial Mouse 

SOFTWARE DESCRIPTION 

      Operating System  :     Windows XP

      Front- End        :     C#. NET with ASP. NET

      Back- End         :     MS SQL SERVER 2005 EXPRESS 

For more information on this project you can download civil registry cse project from this site for a free of cost.

Download CSE Civil Registry .Net  Project report .

Posted on

Online Tendering CSE Project

Main aim for implementing Online Tendering cse project is to perform product tendering through online web application, according to this process product tender details are published on web with required product information and about the status of the tender and information like starting and ending dates.Online-Tendering-CSE-Project.

As we know in present system tender advertising is done through news papers which is causing problems like communication gap between companies and government authorities because of this problem competition is reducing, ultimately cost of project is increasing. So developing this project can fix this problem by submitting tender details to a dedicated tender site which will

be visible for every company and apply for tender through this web site if they are satisfied with the provided tender quotation .This process will reduce time and provide option for different companies respond to the tender. 

This application has different modules in first module advertiser who advertises his tender details should register with the system and submit detailed information on the product. In second module companies who are searching for work should register and apply for the tender. Third admin module in this module admin will coordinate with both modules. 

This application can be developed within a low budget but regular maintenance is compulsory. 

Software and hardware requirements for developing this project are explained in project report. 

System specifications for Online Tendering CSE Project

Hard Ware Requirements:- 

  • Processor:: Pentium-II(or) Higher
  • Ram:: 512MB (or) Higher
  • Cache:: 512MB
  • Hard disk:: 10GB 

Soft Ware Requirements:- 

  • Web Server
 : Tomcat 5.5
  • Server-side Technologies
 : Java, Java Server Pages
  • Client-side Technologies
 : Hyper Text Markup Language, Cascading Style Sheets, Java Script, AJAX
  • Database Server
 : MS Access
  • Operating System
 : Windows (or) Linux (or) Mac any version

For more information on online Tendering cse project you can download project report from this site for a free of cost.

Download CSE Online Tendering CSE Project report .

Posted on

.Net Project On Employee Reimbursement System

.Net Project On Employee Reimbursement system is a web based application which can be used by any organization for giving best services or their employees for reimbursement of money. This application will replace existing manual procedure following by many organizations which takes lot of time and manual work. .Net-Project-On-Employee-Reimbursement-System

Every company will come across this situation where their employees will submit receipts like train ticket, doctor certificate…Etc for reimbursement. In existing system employees will fill the form and submit to higher managing department by for approval which is a time taking process. Using this application employees can submit information through a web application which can be done from any were and the application will be submitted to higher authorities for cross check and status of the application can be updated on web through which employee can interact with officials and the payment can done through online which is an easy and helpful process for company and employees. 

 Employee Reimbursement system project can be used in real time by any organization for reducing manual work and work load. Exchange of information is easy using this method.

 This application contains six modules with different functionalities assigned in each module based on the user designation. 

Employee Reimbursement system  Functionality: 

Admin Module

             This module helps user to login to  the site and submit his application. Admin has permission to check his details to approve or decline the application. 

 Employee Module:

                  In this module employee can login with his desired username and password and submit information for reimbursement. After his bill is cross checked his application status will be updated on this profile. 

Manager Module:

             This module will be handled by manager of an organization who will accept application of requested employee and provide solution for his request. 

Director Module:

         In this module cross checked application from manager will be submitted to director he will recheck the details and submit to account section. 

Reports Module (ACCOUNTANT): 

             This module deals finance matters based on the expenses employee spent on bills and transfer money to employee bank account.

Download Project report  of .Net Project On Employee Reimbursement System.

Posted on

Bio Diversity Final Year Project Report

This Bio Diversity Final Year Project Report consists of the definition of Biodiversity, Levels, and Values of Biodiversity. Biodiversity derived from bios means life and diversity mean variety refers to a wide variety of life on earth to all plants, animals, and microorganisms. Biodiversity is defined “as the variety and variability among living organisms and the ecological complexes in which they occur. It is virtually synonymous with “Life on earth”.

Levels of Biodiversity: There are three levels of Biodiversity: 1) Genetic diversity 2) Species diversity and 3) Community and Ecosystem diversity. The report provides the detailed information about Levels of Biodiversity. This report also defines the Values of Biodiversity which contain Food, Drugs & Medicines, Fuel, and Social Value.

A biodiversity hotspot is a biogeographic region with a significant reservoir of biodiversity that is threatened with destruction. There are 25 such hotspots of biodiversity on a global level, out of which two are present in India. These are Indo- Burma (earlier The Eastern Himalayas) and the Western Ghats & Sri Lanka.

In Threats of Biodiversity explain the Habitat loss, degradation, fragmentation, Poaching of Wildlife, Man – wildlife conflicts, Climate change, Introduction of Exotic species. Finally, the report explains on Conservation of Biodiversity and In- situ conservation and Ex-situ conservation.

Conclusion:

As per the report critical processes at the ecosystem level influence plant productivity, soil fertility, water quality, atmospheric chemistry, and many other local and global environmental conditions that ultimately affect human welfare.

These ecosystem processes are controlled by both the diversity and identity of the plant, animal, and microbial species living within a community. Human modifications to the living community in an ecosystem – as well as to the collective biodiversity of the earth – can, therefore, alter ecological functions and life support services that are vital to the well-being of human societies.

Posted on

Engineering Project Report on Bio Diversity

This Engineering Project Report on BioDiversity consists of the definition of Biodiversity, Levels, and Values of Biodiversity. Biodiversity derived from bios means life and diversity mean variety refers to a wide variety of life on earth to all plants, animals, and microorganisms. Biodiversity is defined “as the variety and variability among living organisms and the ecological complexes in which they occur. It is virtually synonymous with “Life on earth”.

Levels of Biodiversity: There are three levels of Biodiversity: 1) Genetic diversity 2) Species diversity and 3) Community and Ecosystem diversity. The report provides the detailed information about Levels of Biodiversity. This report also defines the Values of Biodiversity which contain Food, Drugs & Medicines, Fuel, and Social Value.

A biodiversity hotspot is a biogeographic region with a significant reservoir of biodiversity that is threatened with destruction. There are 25 such hotspots of biodiversity on a global level, out of which two are present in India.

These are Indo- Burma (earlier The Eastern Himalayas) and the Western Ghats & SriLanka. In Threats of Biodiversity explain the Habitat loss, degradation, fragmentation, Poaching of Wildlife, Man – wildlife conflicts, Climate change, Introduction of Exotic species. Finally, the report explains on Conservation of Biodiversity and In- situ conservation and Ex-situ conservation.

Conclusion:

As per the report critical processes at the ecosystem level influence plant productivity, soil fertility, water quality, atmospheric chemistry, and many other local and global environmental conditions that ultimately affect human welfare.

These ecosystem processes are controlled by both the diversity and identity of the plant, animal, and microbial species living within a community. Human modifications to the living community in an ecosystem – as well as to the collective biodiversity of the earth – can therefore alter ecological functions and life support services that are vital to the well-being of human societies.