Highly Secured E-Passport System Project

  • Project Title    : Highly Secured E-Passport System Project
  • Equipment      : AVR Microcontroller

Project Description: The main objective of Highly Secured E-Passport System microcontroller project is to provide the protection to the user’s passport from the fraud passports. The previous system has lots of draw backs and disadvantages like in the form of a book which can be corrupted easily by interchanging the photo graph and signature of the user. By using this electronics project we can give more protection to the passport, Here in this ECE application we have implemented a card based on RFID technology. The card is invisible to everyone and the user details can be stored in the card using RFID and the passport holder will be dumped into the card along with the below three secure functionalities.

1. A text based password which will be known to the passport card holder.

2. His digital photograph for face recognition and thumb impression.

3. IRIS picture for iris recognition module.     

This entire project was developed with AVR microcontrollers within 3 months of time for final year innovative project submission.

RFID Proximity Based Checking, Detecting Expiry Date & Stock Updating

RFID Proximity Based Checking, Detecting Expiry Date & Stock Updating is electronics based final year project based on RFID technology. Different RFID tags or cards are assigned to different products or items. By using these cards, we can easily detect the available stock of any particular item. When some amount of item gets added into the stock, the updated stock is detected by the RFID tags. In the hardware part, there is a power supply unit, an ATMEGA 16 microcontroller, a LCD, one RFID reader module, one alarm or buzzer used to implement it.

Multichannel Wireless PLC Based DC Motor Protection EEE Project

This Multichannel Wireless PLC Based DC Motor Protection EEE Project was designed to protect the DC motor from fault. The programmable logic controller (PLC) designed here is basically for monitoring the different parameters of AC motor and protect the AC motor against the fault. If there is any fault in AC motor, then protective relay trips. This final year EEE Electrical & Electronics Engineering project is working adequately in the laboratory test condition and indicating the faults at the computer perfectly.

PC Based GPS Microcontroller Project

The approach of modern high-speed methods and the developing PC capacity gave the actual chance for modern rate productive methods and identifying modern concepts of novelties. The technical development along with requirement for great accomplishment methods made it quick and very fast and very imaginative items with the help of advanced and drives functional algorithms.

This PC Based GPS Microcontroller Project study mentions the modern economical answer to global positioning systems. The PC BASED GPS DRIVER is utilized for diverse sophisticated uses. The control system includes computer and the GPS receiver which gather the information from the satellite and the interface kit that transfers the information to computer by the sequence port.

The conversion software is improved with the help of high-level language of graphical programming (visual basic). The entire solution of the global positioning method is portrayed under this project. The GPS receiver gets the information in the form of longitude and latitude from the satellite to get the actual place of the receiver kit on the Earth and the actual-time position is seen on the map.

A Global Positioning System (GPS) is the navigation system of satellite which functions over the constant transmitting radio intensities of high-frequency including the location and time of the satellite with respect to Earth. A GPS receiver gets the data from three or more satellites and it measures the place of the subscriber on the planet. The receiver focuses among 3 and 15 meters and hence the user can be positioned. Based on many calculations, the receiver is able to measure the distance to destination, speed, trip time, sunset, altitude, sunrise etc.


PC Based GPS Microcontroller Project is concluded that the concepts of sequence information transmission mean that information is moved like the information is transformed from bitwise of transmitter to receiver consequently. For this, the sequence port includes parallel bits of 8, 16 or 32 from the information bus and moves that to obtain 8, 16 or 32-bit.

Download PC Based GPS Microcontroller Project.

Optimization and Automation of Water Cooling Facility Using PLC Project

The Optimization and Automation of Water Cooling Facility Using PLC Project aims on three concepts. Energy conservation calculates over chosen switching and accuracy control, automation of the energy and Plant security over the method of PF development.

A Programmable Logic Controller (PLC) is supposed to combine for the automation portion of the project. PLCs possess great character included in automation and under uses of discrete and process within company function. PLCs are utilized greatly within control systems in which electromechanical relays are utilized formerly.

 PLC would create the method very flexible and simply sustainable-friendly and up-gradable. The step is even created to search the expectation of orienting the equipment-connected PF developing the capacitors to save power.

Group-connected PF developing capacitors are utilized under FACT and it is determined to decrease the maximum request than power consumption. The Btech/BE project creates the review on techno-economic feasibility of supplies-connected and PF developing capacitors for the supplies in Cooling Tower.

The objectives of the ECE/EIE project are to choose the switching and accuracy function of cooling tower fans to save the power, choose the switching of cooling water pumps, techno-economic feasibility review of supplies-connected PF developing capacitors, and automation of functional of cooling water convenience with the help of PLC.


 Optimization and Automation of Water Cooling Facility Using PLC Project is concluded that the cooling water facility gives the high impact for energy production over the method of chosen switching and accuracy control of many tools like the use of energy of fans and pumps which is directly proportional to accuracy cube, decreased in accuracy depending on amount and feature of cooling water needed to secure the great quantity of power.

Download Optimization and Automation of Water Cooling Facility Using PLC Electronics and Communications Engineering Final Year Project.

Related Projects Links:

Power Plant Optimization Demonstration Projects Report

PLC Controlled In D1 Charging Conveyor For Blast Furnace In Vizag Steel Plant

Project Title: PLC Controlled In D1 Charging Conveyor For Blast Furnace In Vizag Steel Plant

Language of Implementation: A programmable logic controller (PLC)

Project Description:                       

              The main aim of the PLC Controlled In D1 Charging Conveyor For Blast Furnace In Vizag Steel Plant is to the braking flaps are located in cooling bed of 120 meters length is divided into two parts 60 meters each. One part covers the first half of the cooling bed and other part covers the remaining half. Each part has an number of individual flaps of about one meter length , and 200mm width, connected to the lengthy shaft covering one half of the cooling bed area. Each shaft is driven by a 52KW separately excited DC motor. These motors are in turn controlled by the drive control system (Drive 1 & Drive 2).                    

Automation of Pneumatic Sheet Metal Bending Machine Mechanical Project

The Automation of Pneumatic Sheet Metal Bending Machine Mechanical Project describes the bending machine which is an essential tool of a machine used to shop sheet metal work. This is generally made for bending of V-die. The bend is created by making use of punch that applies much more force on the die over the work clamped. The bending machine is created in such a manner that this functions automatically. The automation is obtained by making use of electro-pneumatic system.

It possesses large resistance for the corrosion than various other metals and obligated to protect deliberately with the tenacious and thin film of oxide that produce on its surface.

The components needed and chosen to complete automation for bending are compressor, FRL, double acting cylinder, 5/2-way solenoid valve, 2/2-way roller valve, proximity sensor, hose and fittings as needed, PLC kit, punch, and die.

 The machine is modeled to accomplish the work to find out many things. They are to calculate the weight of the work piece, to design methods for clamping cylinder, to find the area of the clamping cylinder, clamping force, piston force, bend allowance, and unloading force of the cylinder, to design methods for bending cylinder and procedure for unloading cylinder, pressure needed to bend the work piece.


The AUTOMATION OF PNEUMATIC SHEET METAL BENDING MACHINE concludes that the Aluminum is the sheet metal which is selected for the purpose of bending machine.  Aluminum is chosen because it is a light metal including density of nearly third part of brass or steel. It is very ductile. The automation is successfully obtained with electro-pneumatic system.


Mech Project on Automatic Temparature Control of Vaccum Brazing Furnace by using PLC

The important principles of  this  Mech Project on Automatic Temparature Control of Vaccum Brazing Furnace by using PLC  is  to  manage and monitors the temperature constantly of  the  two  zones  in  braze  components  and vacuum brazing  furnace  with the help of chemicals for  the  particular job.

Brazing alloys make use of gas turbines components and aerospace applications which consist of nickel like the base material. Nickel has the largest affinity for oxygen.

The proportional plus integral plus derivative (PID) controller manages the vacuum and temperature and values are completed with the help of PLC (PROGRAMMABLE LOGIC CONTROLLER) with ladder diagram programming.

The program is fetched into the programmer-UP25. The PLC includes easy installation, operation, trouble shooting, and exact outputs are achieved. Vacuum brazing furnace is made for brazing the metals in clean situations. The oxidation is ignored and strength of braze is achieved. Therefore the surface cleaning is not needed. The furnace is designed to obtain the maximum temperature of 1350deg C and vacuum level of 5*10power -6.

The instruments are used depending on mechanical motions like leakages, fluctuations, and strength. The modern instruments enhances product quality, increases rate of production, decreases the costs of breakdowns and maintenance, optimize functioning conditions and accuracy, and needs less space. The applications of the instrument aerospace applications, gas turbines, measurement of flow, power production, brazing tips, shrouts, flow nozzles, and gas liners.


It is concluded that the vacuum furnace is greater than inert gas managed by furnace like oxygen is found to obtain braze and strength. The furnace includes three phases. They are creation of vacuum, heat treatment, and cooling.

Download Mech Project on Automatic Temparature Control of Vaccum Brazing Furnace by using PLC

Mobile Communication System Seminar Topic

Mobile-Communication-System-seminar-topicMobile communication system seminar topic explains about new technologies in telecommunication systems and its usage in present trend. This paper covers features of wireless communication networks 1G, 2G, 3G and 4G with detailed explanation on features of 4G, working of 4G technologies, Multiplexing techniques used in mobile communication systems, antennas and features of 4G.

Mobile technology is one of the fast growing technologies in the world there are millions of users in the world using telecom services. There are new technologies developing in this field among them wireless communication technology like 3G and 4G are one of the mostly used technology. At present 3G is mostly used web communication in the world which provides wireless internet, video calling and mobile TV. 4G is a fourth generation wireless communication technology which is advanced version of 3G with advanced features like fast data transmission on moving and same ip address on moving, internet access anywhere and high quality mobile TV.

4G technology uses any frequency which is already in use like radio frequencies which will increase wider scope of communication. It works on frequency ranges from 3.2 HZ to 10.6 HZ.4G works with less power consumption because it uses pulse instead of signals. For implementation of 4G new antennas should be installed.

download Mobile Communication System Seminar Topic, paper presentation.

Haptic Reality System Seminar Topic

Haptic-Reality-System-SeminarHaptic reality system seminar topic explains about objectives of haptic system, applications of this system, devices which used haptic technology, functionality of Novint Falcon, Haptic Braille and functionality of haptic Braille. This technology works on sensing system, when human being touches or applies vibration or motion externally same motion related work will be done inside system.

Haptics is a new technology which is used in virtual environment in which users can feel about the objects externally. This concept was initiated from virtual reality. In order to feel the environment through network there need to be a feedback. Haptic feedback system belongs to feedback system.

Haptic feedback system is used in different application like teleoperators and simulators, computer and video games, mobile consumer technologies, haptics in virtual reality, research, medicine, robotics and arts and design.

This technology is mostly used in virtual reality applications and gaming system, in gaming system users can feel using joystics and steering wheels. This application is also used in temperature control but using this technology in reality is not still in use because of its cost factor. 

download Haptic Reality System Seminar Topic and paper presentation.