Category: ECE and EEE Project Abstracts

This category consists of latest abstracts which can be used for institutions for developing new projects for electrical and electronic final year students. Electronics students can download mini and major projects with abstracts and project reports.

Posted on

Nuclear Radiation Detection and Tracking through Motes for Preventing From Nuclear Terrorism Project

Nuclear Radiation Detection Project Abstract:

Nuclear Radiation Detection and Tracking through Motes for Preventing from Nuclear Terrorism Zigbee based projects main idea is to implement a application which can help military or police to track attacks caused by Nuclear Radiation from terrorists. This application works on sensors, GSM system and Zigbee protocol.

Developing this prototype application is a cost effective process. Zigbee is a open source wireless protocol which can be downloaded for a free of cost and we use this wireless technology in this project. And GSM is used as wireless technology for communication purpose.

Motes are small computers which are connected in a ad-hoc network wirelessly. Carbon diode is used as semiconductor.

Posted on

Inter Integrated Circuit Mini Project

Inter Integrated Circuit Abstract:

The main objective of Inter Integrated Circuit Mini Project is to interface with hosts like EEPROM and that monitor the parameters like temperature, humidity etc. It is used in embedded systems to interface with real time clocks and it has a special advantage is that we can add /remove the peripherals while system is running, which makes system as idle for hot swapping.

 Inter Integrated Circuit works on two lines SDA line and SCL line. This integrated circuit works at a 400 kHz frequency. One of the main advantages of this protocol is there can be many slaves connected to a single master chip. This system work on master slave modes where master will look always check for connected  slaves.

download Inter Integrated Circuit Paper Presentation.

 

Posted on

RF Based Servo and DC Motor Controller System for Spy Plane Project

RF Based Robotics Projects 

RF based servo and DC Motor Controller system for spy plane embedded based robotics projects main idea is to implement a embedded system based robot which works remotely on Radio Frequency. Robot motion is controlled using a DC motor.

Using remote control system we can control motion of robots and sensors are attached to robots which is will sense obstacles that appear in front of the robots and sends information to micro controller and micro controller will take decisions and uses motor controlling techniques and send signals to DC motor. 

 

 

Posted on

SMS Based Electrical Billing System

SMS based electric billing system projects main idea is implement a efficient way of sending electricity bill to users from remote system using GSM technology as base in the form of text messages. As we know automatic meter reading is one of the upcoming technology for reading different types of bills using a remote application where there is no need of any human intervention. Same as to that of this technology SMS based electric billing system can be used in every billing systems which will save time and work will be completed in less time.

In existing system manual procedure is used for billing system. Officials will go to every house and print receipt based on the meter reading of the house and submits to the respective person in that person. With this procedure there is need of large number of man power.

download SMS based electric Billing System Project.

Posted on

Linear Induction Motor Used For Two Wheeler Application

Linear Induction Motor Used For Two Wheeler Application is used to devolpe two wheeler using Linear Induction Motor.  In this project initially we will consider how induction motors are used in present automobile systems and  its usage in different fields are explained . And we will cover details of different types of linear motors and there functionality. And each system is analyzed based on its usage.  Finally we will explain how it is useful for our application and implementation procedure.

Main advantages of using liner motors in transportation system is  it has capability to produce direct thrust without any conversion of rotational energy in to translation energy.

These systems are used in high level transport system where braking and speed control are major factors.  This systems mostly used in Railway and automobiles.
Posted on

IUPQC (Interline Unified Power Quality Conditioner) Project

—  The object of “IUPQC (Interline Unified Power Quality Conditioner)”to regulate voltage of one feeder while regulating the voltage across a sensitive load in the other feeders. Hence the name IUPQC.  By changing the voltage across different loads in other feeders. This project helps in providing quality of power supply without any problem. 

In this projet we use series of voltage source converters which are connected to each other using a dc bus. In this application we explain how this devices are connected togeather between different feeders to regulate voltage of different feeders and provide quality unified power.

Here you can download project report and paper presentation  on this project.

download IUPQC (Interline Unified Power Quality Conditioner) Project project Report and paper presentation.

Posted on

Voice Chip Apr9600 Interfacing with 8051 Micro Controller

VOICE CHIP APR9600 INTERFACING WITH 8051 MICRO CONTROLLER is mainly used in mobile communication for recording and replaying the voice message according to the situation need. This application uses APR9600 voice chip for storing and playing recorded video which is integrated with 8051 micro controller.

                             In mobile communication voice recording is one of the primary features for users when they are not in coverage area. If there is any urgent message caller can store message in the form of voice mail box. This application will help to understand how this system works. Program is written in c language and written in to micro controller chip which will communicate with voice chip.

 

Posted on

Book Picking Library Robot

  • Title: “Book Picking Library Robot”
  • Team Size: 4 Members
  • Technology used: C language

Project Description:

Final Year Engineering Project on “Book Pick & Place Robot” in library application in “C” language. This also Library Related Project, It works like a selection of a book from any particular location and keep any book in perfect location. To run this robot we use robotic arms and stepper motor, by which it does rotate in 90˚, 180˚ & 270˚. It is an electrical motor that can full rotate into a large number of steps.  C Programming language used in this project because of simplicity, modularity and structured language, so that easy to understand.

Posted on

Frequency counter Using 8051 Microcontroller

The Aim of Frequency counter Using 8051 Micro controller Project is to develop Frequency Measuring Device Which Range from 1Hz to 500 KHz Frequency using AT89S52 Microcontroller and output is displayed on LCD screen.

One of the important uses of this project is we can see the result of the frequency on other equipment. Many of the signal generators are provided with digital display . In this application we will provide a LCD display where frequency will be displayed on LCD screen.

Download Project Report on Frequency counter Using 8051 Micro controller project .

Posted on

Automation Fan and Light Control For Industrial Appliances ECE Project

This Automation Fan and Light Control For Industrial Appliances ECE Mini Project is a standalone visitor counter and display system it has the task of counting the number of persons entering into the room or living in the room and display the count on display screen. Use of embedded system technology makes this closed lop feedback control system efficient and reliable microcontroller allows dynamic and faster control. It is a device that collects data from two pair of IR sensors, codes the data in to a format that can be understood by the controlling section this system controls the appliances as per the output received from the sensor and counts number of persons inside the room based IR sensor, This Electronics and communication engineering final year mini project is the top rated project for submitting their  project reports.