Category: ECE and EEE Project Abstracts

This category consists of latest abstracts which can be used for institutions for developing new projects for electrical and electronic final year students. Electronics students can download mini and major projects with abstracts and project reports.

Posted on

Power Former Seminar Technical Presentation

The main aim the Power Former Seminar Technical Presentation is to generate more power using the power former. Power utility increases day by day for industries, home appliances, corporate companies, A / C usage increases, so to avoid the power problem we have to generate the power in an efficient manner. This technical paper can done this, and this document gives us details of the power generation and transmission and provides the details how the power is generated in an effective manner, here in this  we are using step – up transformers, this is used here to step up the voltage value, if the plant generated 40 k v then it step up to 900 k v, but the drawback in this equipment is less efficiency, and more maintenance cost, area taken more for manufacturing, power former is a 3 phase ac generator, the components used here are generator, generator circuit breaker, step up transformer, line circuit breaker,  stator design should be innovative, the types of winding consisted in the power former are outer semiconductor layer, inner layer, solid insulation, standard conductor. So by using the step up transformers in the plants we can generate the more power, so that high voltage is generated.

Download Power Former Seminar Technical Presentation with full documentation.

Posted on

Phase Sequence Detection and Controlled Power Supply System Project

This Phase Sequence Detection and Controlled Power Supply System (EEE) project mainly used to find the phase sequence of any machine or other electrical equipment and it works on three phase supply and the extra feature added in this project is controlling the power supply voltage and also provides the concept of over and under voltage protection. in this electrical project three phases are used namely  R Y B (red, yellow, blue), if the order is not in a manner then the total circuit winding will be damaged, when the high voltage is applied to the system then that is more than the required range then the circuit and finally it will be tripped, this can be done by using the relay  and high voltage protection system, with the help of this we can protect our electronic equipments, can provide more efficient and simpler to maintain the phase detection, this project is mainly used in sub stations, because the power from the power plant can send to the sub stations then next send to the homes, agriculture areas, industries, here industries are having separate line for power transfer, so in the sub stations we have to set the phase sequence, where it should be in a sequence of R Y B.

Download Phase Sequence Detection and Controlled Power Supply System Electrical and Electronics Engineering EEE Project Report

Posted on

Differential Drive Robotic Rover project

The main aim of this Differential Drive Robotic Rover project is to whenever obstacle finds the robot then takes the diversion from that position. The obstacle can be founded by using sensors, here the robot consist of two motors, each and every motor control the operation of the vehicle moving forward, backward, left and right this can controlled by the  remote. IR rays are used for the detecting the vehicle, there are two main parts are working with the IR those are emitter, detector in this emitter emit the infrared rays and detector detect if any obstacle is present in that motion of moving, this type of robot mainly used in the industries. Here in this project use the microcontroller because the sensor send a signal to the microcontroller then it controls the operation, here separate sources are required for the motor and the microcontroller.

The robot consist of power supply unit, battery charger unit, IR sensor circuit, microcontroller unit, motor driver, and DC motor, power supply required for the microcontroller and motor is different, 5Volts for the microcontroller, 12volts for the motor driver circuit, design of IR sensor circuit, the microcontroller used here are AT89C51, 256kb of RAM, interrupt handling, interrupt recovery time and this robot is most reliable and cheap around 2000/-only.

Differential Drive Robotic Rover project

This project architecture works with IR Sensor circuits and these are directly connected to the micro controllers with motor driver circuits as well as power circuits and different wheels.

Download Differential Drive Robotic Rover full project document and report, Paper presentation, seminar topic.

Posted on

Collide Vehicle Information Capturing Using Gps and Gsm Technologies Project

The main aim of this Collide Vehicle Information Capturing Using Gps and Gsm Technologies project is to get the vehicle information using the GSM and GPS technologies, this GSM is the global system for mobile (to get the vehicle information using SIM (subscriber identity module)), and GPS (global system for mobile) is used to find the vehicle location and to get the information when the accident occur, in this project the components used are accident switch, microcontroller, GPS modem, GSM modem, buzzer, ADC analog to digital converter, LCD- liquid crystal display, the software used are embedded c, keil IDE software, this project is mainly used in the industrial usage, coalmines, transportation system, object recognition,  whenever accident occur then the sensor detect the vehicle and give the information based on the threshold value selected, if the threshold value exceeded then sensor give the information to the microcontroller, and the sensed data is in the analogy form then the data has to convert to the digital form, this can be done using the analogy to digital converter, then this digital data send to the microcontroller, then compare this value with fixed threshold value, if the threshold value exceeds then the microcontroller send the information to the mobile using GSM, to find exact location using the GPS.

Download Collide Vehicle Information Capturing Using Gps and Gsm Technologies Project Report and Full Documentation.

Posted on

4G-Mobile Communication Systems seminar topic

This 4G-Mobile Communication Systems seminar topic is mainly explain you about the 4G mobile communication systems, this technology is the successor of the 3G communication system, it provides ultra broadband internet access, it means wireless services are provided, it supports video calling, 3D television. Nowadays 4G technology is used because it provides 100MBPS speed; the data rate is 1GBPS in stationary times. 3G technology is designed it can support up to 2mbps, compared to 3 rd generation technology 4th generation is having more features higher interactivity (comfortable interface), higher connectivity (better connection), dynamic self reconfigurability (can change the equipments when problem occur), voice recognition, provide good security, it provides the features of internet access, radio access, platform, display, RF component.

It support mobile IP, GPS technology support, effective handover algorithms, user interface technology,   these are the services provided by the 4G technology. To use the 4G technology we should have the network in rural areas even they don’t have the 3G signal network, so by taking the 4G supported mobile there is no usage to that type of customers, 4G provides the high data rate, recently 4G supported mobiles are manufactured and released in to the market, I phones are supporting the 4G technology. 

Download 4G-Mobile Communication Systems seminar topic and Paper Presentation Report.

Posted on

3-Phase Minor Electrical and Electronics Engineering EEE project

3-Phase Minor (EEE Project):

                The main aim of this 3-Phase Minor Electrical and Electronics Engineering EEE project is to explain use of three phase minor, in this project we use the three transformers, these three transformers of type step down transformers, these transformers convert the high voltage to low voltage that is 230 volts AC to 12 volts AC, now these AC voltage is convert to the DC voltage rectifier, here in this project we use the IC (integrated circuit chip) this is the electronic chip, it requires only 5 volts so here we use the voltage divider to divide the voltage, this signals are given to the operation amplifier (op amp) of type LM 324 type, the output of operational amplifier shown digital form, 0’ s and 1’ s this digital data display on the LED’ s. the components used in this project are transformers (step down), rectifiers (to convert ac to dc), capacitors, resisters, op – amp of type LM324, LED’ S, voltage regulator (voltage controller), power supply. This project is mainly used in big industries, power plants, this equipment is controlling the three phases of the transformers, the 3 phase supply is transferred by using this project, and finally this project is very complex and should be maintained in a safe position.

Download 3-Phase Minor Electrical and Electronics Engineering EEE Final Year project report Documentation and Paper Presentation seminar topic.

Posted on

Final Year Project on Robotic Car

The main objective of developing this Robotic car is to provide automatic method for controlling of microcontroller based electronic robotic vehicle. Here we have used Keyboard based operations to move the positions and speed of the car, keyboard prepared in this application is looking like computer keyboard and has the functionalities like left key used for turn left the car wheels and position, right key used for turn right the car position, enter button used to stop and start the car. Simple motors and stepper motors, micro controllers, transmitters, receivers, LCD displays, LED equipments used to impalement total robotic movement system. 8951 Microcontroller connected to the keyboard and operations can be done by car operators in the vehicle control room. IR transmitter and receiver sections, Stepper motor, DC motors directly connected to micro controller in the circuit diagrams.

final-year-project-on-robotic-car

Download Final Year Project on Robotic Car and total Project Documentation, paper Presentation, Seminar Topic.

Posted on

Automated Multi Stored Car Parking System Project Documentation

The main aim of developing this Automated Multi Stored Car Parking System Electronics final year project is to provide best solution for four wheeler vehicle car parking. This project can useful for reducing the place of parking in business areas as well as in corporate companies. Nowadays population in metropolitan cities is increasing day by day and it can be very hard to giving place to park customer vehicles in any company so this system is fully automated and can park cars floor by floor and order by order without any wastage of space. In this project we have used Micro controllers, LED, LDR, Beeper Sections, Computer Keyboard, LCD, Motors, Sensors, etc. Microcontroller Programming Used to develop this Idea and LCD used to display the messages like welcome to parking section, available parking areas, parking section is busy, wait for some time to park your car, etc.

Download Automated Multi Stored Car Parking System Project Documentation, Project Report, Abstract, Project PDF, PPT, Seminar Report and Paper Presentation.

Posted on

Wireless Communication ECE Seminar Topic

This Wireless Communication ECE seminar topic is explains you about the wireless communication. This communication is no need of wires to communicate for short and long distance communication, wireless communication is the telecom communication, here in this there is no need of physical connection between source and destination, GPS is the wireless technology it is used to find the location of the vehicle and in door openers, and used air traffic system, military, civil, commercially.

Nowadays cellular system use the wireless communication, WLAN is the wireless local area network it link the two or more networks, most of the WLAN is based on the IEEE802.11 standards, this uses the WI-FI name, by using wireless technology without connection we can access the internet, there are several types of WLANs those are peer to peer/ ad-hoc- to communicate directly without central access points, bridge networks, and it allocate the spectrum for the spread spectrum. This wireless communication not only used in telecom but also in wireless power transmission, wireless charging, wireless mouse, wireless ATM, so the wireless communication is necessary nowadays to communicate without any physical connection between source and destination. Mostly now in most of the companies, industries, and colleges use the WI-FI technology to access the internet in that surrounding area.

Download Wireless Communication ECE Seminar Topic and Paper Presentation.

Posted on

Seven Level Diode Clamped Multi Level Inverter seminar topic

This Seven Level Diode Clamped Multi Level Inverter seminar topic is mainly explains you about the multi level inverters by using seven diodes clamping circuitry. This topic mainly uses the concepts of diode clamped inverter, multi level inverter, PWM (pulse width modulation) switching techniques. When photovoltaic system connected to a two level inverter then there may be mismatching or shades may occur, so that there may be reduction in power, so to avoid this problem of power reduction there we use multi level inverter instead of using two level inverter, so here high voltages are involved by using thyristors we can control the voltages and currents, thyristor can control the Mega Watts of power generated. Here pulse width modulation scheme is used; pulse width modulation scheme is used in five level and seven level diode clamped multi level inverters (DCMLI).

This DCMLI technique is implemented using the MATLAB programming and the total harmonic distortion is compared with two levels and seven levels, in this seminar topic explains you about the diode clamped multi level inverter, PWM method for the seven level DCMLI (seven level inverter model), observation of the five level and seven level DCMLI, and total harmonic distortion comparison. So for high power applications seven level diode clamper with multi level inverter is used.

Download Seven Level Diode Clamped Multi Level Inverter seminar topic and Paper Presentation.