Category: Power Electronics Projects Abstracts

Electrical engineering students can find list of Power Electronics Projects topics with circuit diagrams and developed using matlab. In this category you can download power electronics project abstracts and ppt and project report.

Posted on

Wireless Ac Motor Speed Control Using TRIAC

  • Project Title                        :  Wireless Ac Motor Speed Control Using TRIAC
  • Software Technologies          :  microcontroller, keil software.  

Brief Description:

In this Wireless Ac Motor Speed Control Using TRIAC project speed of an ac motor can be controlled without using the wires. In this system speed is controlled with the help of switches connected to RF transmitter section it send the signal to RF receiver section with the help of microcontroller and triac speed of an ac motor is controlled. This Electrical and Electronics Engineering technique can be used in small scale Electrical based industries and also in home appliances. This project was designed with microcontroller & keil Software.

Download Wireless Ac Motor Speed Control Using TRIAC Project reference documents

Posted on

Transformer Efficiency Measuring Meter

  • Project Title: “Transformer Efficiency Measuring Meter”      
  • Software Requirements: keil software to store programmes in micro controller

            Project Description:  Here this Transformer Efficiency Measuring Meter Electrical Engineering final year project system is developed, which does all the calculations internally through an embedded system and will be displayed through the LCD screen. This proto-type module is constructed with 1:1 ratio single phase power transformer that generates 220V at secondary and is able to deliver a maximum output power of 110 Watts. With the help of two CT’s and two PT’s, currents and voltages of both windings of the transformer are measured & converted into digital by the ADC. Based on this digital information, the controller program is prepared to calculate the efficiency internally and displays it in the LCD. This project was developed with keil software tool, the main purpose of this tool is to store embedded c programs ton micro controller.

Posted on

Overall Power Distribution

Project Title: Overall Power Distribution

 Project Description: The objective of the Overall Power Distribution final year electrical project is how to generate the power and how it will be transmitted to all the remaining electricity stations. The main objective of this power generation is based on the combined cycle operation.

Download overall Power Distribution at NFC EEE Final Year Project

Posted on

Industrial Automation and Monitoring System

Project Title: Industrial Automation and Monitoring System.

Organization: MY Labs.

Project Description: This Industrial automation and monitoring system project is used to provide security to the machines by setting passwords. This project was developed with embedded c programming language, Micro controller-AT89S52 and RS 232 CONVERTER (MAX 232N) used to develop this project.

Download Industrial Automation and Monitoring System

Posted on

Automatic Power Factor Controlling

Project Title: Automatic Power Factor Controlling.

Organization: ESRD, Hyderabad.

Project Description:  This Automatic Power Factor Controlling project is used to control the power factor automatically. It increases the productivity without increasing the hidden cost. Small industries need to maintain the power factor to the prescribed level of electricity board. When we all maintain power factor, line losses will be reduced thereby loss to the electricity board will be marginally reduced which can save the nation to provide power in an efficient ways.

Download Automatic Power Factor Controlling

Posted on

Power Grid Control through PC

Project Title: Power Grid Control through PC

Project Description: The main motive of this Power Grid Control through PC project is to control the power in the grid with the help of programming and various circuit configurations.

  • The programming application is done in basic c.
  • The software programming is done to control the various relay, circuit breaker and transformer.
    • By the help of programming the various operations can be controlled like opening and closing of this equipment and various other operations.

    Related project report on power grid control which works on GSM Modem for reference.

    Download Power Grid Control through PC Project.

Posted on

Electricity Generation through Coal

  • Project Title: Summer Training on Generation of Electricity
  • Organization:  NTPC
  •  Nature of Training:  Electricity Generation through Coal
  • Project Description :  Learned how coal is being used for electricity production.
  • First of all coal is being brought into hopper. In hopper coal is being crushed into small pieces.
  • The crushed coal is brought into bunker through conveyer belting from bunker the coal is crushed into powdered form.
  • The crushed coal goes into boiler.
  • In boiler combustion of coal takes place and heat is generated.
  • This heat is converted into steam. This steam is used for production of electricity.

Download Electricity Generation through Coal Project reference documents

Posted on

Brake Failure Indicator Project

Project Title: Brake Failure Indicator

Project Description: The circuit is used to get an early warning of brake failure while driving. This Brake Failure Indicator circuit provides a break failure indicator which verifies the condition of the brake and display an audio as well as an indication for the person. Thus the circuit provides an early warning of the brake failure condition while driving and prevents the accidents.

Download Brake Failure Indicator Project Reference documents

Posted on

Energy Conservation Using PIR Sensor Project

Project Title                –           Energy Conservation Using PIR Sensor Project

 Brief description:  The project ‘ENERGY CONSERVATION USING PIR SENSOR’ it consists of ATMEL 89C51 Microcontroller , relays, driver circuits , passive infrared sensor and transformer.

 In our project main aim is to sense the infrared radiations emitted from the body. The infrared rays can be sensed by a Passive Infra red sensor. Then signal is given to the Micro-controller. The Micro-controller activates the relay circuit. At the relay circuit, we can connect whatever the electrical we want to operate like fans, computers, light etc., without using any switches. If human body is not presented automatically switch off all applications.

 The project is designed especially for the people who are busy enough to even switch off their electrical appliances. The project became an eco-friendly project by conserving the energy.

Designer Role in the project     : Developed the code for in embedded C which is dumped into the Micro-Controller. We are a team of five and I am the team leader.

Download Energy Conservation Using PIR Sensor Project.

Posted on

Analysis of 10kw VHF TV Transmitter

  • Project Title                            Analysis of 10kw VHF TV Transmitter
  • Project Location                     Dooradharshan

Brief description: The Project ‘ANALYSIS OF 10KW VHF TV TRANSMITTER’ is a TV Transmitter which transmits the combination of both audio and video signals. Here in our final year b tech project we studied how the audio and video signals are combined and strength of signal is increased up to 10kw.

The 10KW TV Transmitter consists of exciters, exciter switch, synthesizers, mixers, converters, modulators and power amplifiers. Initially the transmitter receives the low strength signal. The transmitter consists of two Exciters. The received signal is given to Exciter A or B. The output of the any Exciter is given to divider where the power is divided and then to the combiner where the power is combined. Here we require signal strength up to 10kw so we divide the video signal in to 10 signals individually and the signals are given to power amplifiers. The strength of the signal is increased 10*1kw is equal to 10kw total 12 power amp are used 10 for video and 2 for audio the output for video as 10kw and audio as 1kw totally the output in the ratio 10:1.

The output of individual audio and video signal is given to V/A Combiner individually the two signals are combined equally the output is given to the antenna. The high power output from the antenna is the 10KW VHF signal which we get in our TVs`.