Category: Electronics Abstracts

B.tech electronics and electrical final year and third year students can select best electronic project with full project report for free download. Students can find latest electronics abstracts for mini and major projects. Project reports helps students to get over view for implementing project.

Posted on

Control System of Transmitting Using Conventional Logic Gates

Project Title: Control System of Transmitting Using Conventional Logic Gates
Project Domain: Communication

Project Description:-

                        In this Control System of Transmitting Using Conventional Logic Gates project the aim is to study the process of transmitting signals by an antenna. And the transmitter characteristics. In this project we mainly study the different types of antennas and their operation.

          Control system’s basic function is to ensure proper switching on and switching off of the transmitter. It has to ensure safety of both the equipment and personnel. Safety of the operating personal and then safety of the costly and critical equipments are very important. So it is necessary to monitor both and take precautions in a fool proof way. For example, it is dangerous to run the transmitter with the cubical doors kept open, because dangerous voltages are present in them. So it becomes necessary to monitor the status of the door micro switch and this interlock id called door interlock (DK). The control circuit monitors the status of this micro switch and switches OFF the transmitter immediately as soon as any door is opened. This ensures safety. It has to take care of the malfunction, over loads and any other faults that occur during the running of the transmitter.

Posted on

Autonomous Vehicle with Obstacle Detection

Project Title: Autonomous Vehicle with Obstacle Detection

Developer Responsibilities:

  • Prepared work-in-progress presentations and final presentation to report project status to HOD.
  • Complete evaluation/documentation/feedback forms at the end of the project.

 Software’s used:  Keils

Project Description:

       Autonomous vehicle with obstacle detection is a robotic based embedded project. A vehicle is moving on the road, whenever obstacle is came in front of the vehicle then the vehicle will stop and it goes back after  rotate it another direction and move forward direction. . The obstacle is detects the IR sensor, and give the sensor output to the input of microcontroller. It controls the vehicle directions based on the embedded C program which dumped in ROM. The microcontroller is handling the vehicle motor by using H-Bridge technique.

Application of Autonomous vehicle with obstacle detection:

  • In Mines for detecting obstacles in the way and helpful to find a path.
  • These robots are also used in space applications.
  • This project is helpful for finding obstacles for the vehicle in other planets .so that they can move freely and capture the surroundings. Eg: like in mars.
  •  In Autonomous Vehicle with Obstacle Detection project The developer has done program and designing of hardware.
Posted on

Industrial Automation and Monitoring System

Project Title: Industrial Automation and Monitoring System.

Organization: MY Labs.

Project Description: This Industrial automation and monitoring system project is used to provide security to the machines by setting passwords. This project was developed with embedded c programming language, Micro controller-AT89S52 and RS 232 CONVERTER (MAX 232N) used to develop this project.

Download Industrial Automation and Monitoring System

Posted on

Automatic Power Factor Controlling

Project Title: Automatic Power Factor Controlling.

Organization: ESRD, Hyderabad.

Project Description:  This Automatic Power Factor Controlling project is used to control the power factor automatically. It increases the productivity without increasing the hidden cost. Small industries need to maintain the power factor to the prescribed level of electricity board. When we all maintain power factor, line losses will be reduced thereby loss to the electricity board will be marginally reduced which can save the nation to provide power in an efficient ways.

Download Automatic Power Factor Controlling

Posted on

Tracking and Guiding a Missile Satellite Seminar Topic

Tracking and Guiding a Missile satellite seminar topic explains about implementing a SATRACK system which can guide ballistic missile to reach its exact end point this system works on GPS system which will communicate with satellite and communicate with missile for reaching to end point.

This system is designed for comprehensive test and evolution program which can be used in submarines to launch ballistic missiles. This system has the ability to track signals form satellites, send and receive signals using GPS technology.

 This application will store data of different test results which are used for determining accurate path for ballistic missile.

Detailed information of this topic is explained in the attached document.

download Tracking and guiding a missile satellite seminar topic report.

Posted on

Power Grid Control through PC

Project Title: Power Grid Control through PC

Project Description: The main motive of this Power Grid Control through PC project is to control the power in the grid with the help of programming and various circuit configurations.

  • The programming application is done in basic c.
  • The software programming is done to control the various relay, circuit breaker and transformer.
    • By the help of programming the various operations can be controlled like opening and closing of this equipment and various other operations.

    Related project report on power grid control which works on GSM Modem for reference.

    Download Power Grid Control through PC Project.

Posted on

Electricity Generation through Coal

  • Project Title: Summer Training on Generation of Electricity
  • Organization:  NTPC
  •  Nature of Training:  Electricity Generation through Coal
  • Project Description :  Learned how coal is being used for electricity production.
  • First of all coal is being brought into hopper. In hopper coal is being crushed into small pieces.
  • The crushed coal is brought into bunker through conveyer belting from bunker the coal is crushed into powdered form.
  • The crushed coal goes into boiler.
  • In boiler combustion of coal takes place and heat is generated.
  • This heat is converted into steam. This steam is used for production of electricity.

Download Electricity Generation through Coal Project reference documents

Posted on

The Secure Hash Algorithm Mat Lab Project Abstract

The Secure Hash Algorithm is one of a number of cryptographic hash functions for protecting the authenticity of information between two parties. The following algorithms are treated as secure hash algorithms. SHA-1, SHA-256, SHA-384 & SHA-512. These algorithms provide IP security, pretty good privacy and digital signature.

As the usage of wired and wireless communication is improving there need to be advanced hash algorithms for providing security of data. So in this project we implement hash algorithm.

download Implementing secure Hash Algorithms project reference documents.

Posted on

PC to PC & Machine And Machine To Machine Communication Using Zigbee Project Abstract

The purpose of PC to PC & Machine and Machine to Machine Communication Using Zigbee ECE Final Year project is to establish perfect wireless communication channel between computers and micro controllers using ZigBee protocol.

Zigbee is useful for cost efficient communication protocol which is available for free of cost. 

This protocol is a open source application which can be downloaded and use it in simple applications. Usage of this protocol had increased in electronics and communication field. Light controls, medical fields, automatic building systems, smart energy systems and HVAC controls.

This application is designed by using AT89s52 micro controller. And code is written in c language.

download PC to PC & Machine and Machine to Machine Communication Using Zigbee Project Reference document.

 

Posted on

Power Management through Energy Harvesting Concept

 The objective of the Power Management through Energy Harvesting Concept project work has been designed and implemented in the power management through energy harvesting concept which deals with the power saving and optimization.

The overall control is based on sensors of light and temperature. After installing the components the process becomes automatic. 

The title of the project “Power Management” manages the load in different conditions & these loads are considered for the case study of our college.

If a load at a particular zone is increased then the control will trip. To overcome these drawbacks we have designed and implemented the circuit.

The objective is to minimize the cost of supplied power to the load point.

Download Power Management through Energy Harvesting Concept Reference Documents