Category: Electronics Abstracts

B.tech electronics and electrical final year and third year students can select best electronic project with full project report for free download. Students can find latest electronics abstracts for mini and major projects. Project reports helps students to get over view for implementing project.

Posted on

CAN Based Accident Avoidance System Project Report

It is an embedded system based application. The main design  an aspect of CAN Based accident avoidance system project is to avoid the accidents by using CAN protocol. This Project describes a design of effective accident avoidance system that detects an automotive / vehicle / car condition in traveling with the help of ultrasonic sensors and this signal can be used to switch off the apply emergency hand brake or disc brake  with the help of which accident can be avoided.   

                                        In Present scenario maximum number of deaths is due to accidents main reason for accidents are due to negligence of drivers. In order to solve this problem we use can based accident avoidance system which will collect traffic information surrounding moving car and inform to driver in the form of alarm.

download CAN Based accident avoidance system project Report

Posted on

Route Guidance For Blind People Using GSM & GPS Modems

Project Scope:

 The main aim of this Route Guidance For Blind People Using GSM & GPS Modems project is to route guidance and obstacles detection for a blind person.

Here we used GSM, GPS & Microcontroller, which are the main essentials of the project.

  • At The µC has four ports, one port is assigned for keypad, which is the blind person can give destination by long pressing any one of the key on keypad from four keys.
  • Whenever a key received by µC, µC sends corresponding key’s destination which is already programmed on it & also it sends the present location which was initially calculated by the GPS, to the GSM as an SMS.
  • A service provide is available in GSM location (eg., Airtel, Idea etc.,)
  • After receiving the SMS the service provider checks the destination in Google map (GIS), and then He/She will phone to the blind person and guide them to reach the destination.
  • There is also one obstacle detector in blind man’s cane stick, which is gives a beep sound if any obstacle reaches him.

The first the GPS checks its present location as Longitude & Latitude.

Posted on

Outlier Detection Strategy for Distributed High Dimensional Data Sets With Mixed Attributes

Outlier detection strategy for distributed high dimensional data sets with mixed attributes projects main idea is to implement new methods in dataset which is mostly used in research fields of credit card fraud detection and other fraud cases in electronic commerce. This paper will explain different methods for finding patterns that mostly occur in the dataset and compare it with existing data mining techniques which are used to find regular patterns.

In existing research papers outlier detection is mostly focused on datasets with a specific attribute type, by considering these attributes as numerical and ordinal or categorical. Among these methods categorical is not a accurate process where categorical data is converted to numerical values.

download detecting outlier detection strategy for distributed high dimensional data sets with mixed attributes project reference document.

Posted on

Automatic Drunken Driven Avoiding System for Automobiles Project

Automatic Drunken Driven Avoiding System for Automobiles projects main idea is to implement a embedded based system for traffic police to easily find out the people who are drunk and driving. Away from application this system is also useful for find the temperature inside vehicle. In this project we use LM35 for sensing temperature, and ADC 0808 for analog to digital converter.

Sensors will collect information in the form of analog signals and send information to analog to digital converters and digital signals are sent to micro controller. If driven is drunken bulb will off and information is displayed on LCD screen.

download Automatic Drunken Driven Avoiding System for Automobiles project report.

Download EEE Final Year related project for this Topic.

Posted on

Bandwidth Estimation for IEEE 802.11-Based Ad Hoc Networks Project

Bandwidth Estimation for IEEE 802.11-Based Ad Hoc Networks projects main idea is to provide quality of service and improve the performance of Ad Hoc Network packet transmission and reduce delay in packet transmission.

Ad hoc networks works don’t need any fixed infrastructure like base stations for its operation. In this technology packet transmission and receiving are addressed by nodes. Ad hoc system works on IEEE 802.11 wireless network standards which is not designed for ad hoc networks but it is used for wireless systems so this standards are not accurately suited to for this system.

Limitations of this system are they work for short ranges mainly on radio communication range so in order to solve this problem in ad hoc network distributed routing protocol is implemented for communication between out of range.

download Bandwidth Estimation for IEEE 802.11-Based Ad Hoc Networks Projects reference docuemt.

Posted on

Artificial Neural Networks Trained Load Flow Analysis Project

In Artificial Neural Networks trained load flow analysis project, Load flow solution is necessary for power system planning, operation and economic scheduling of power system. Load flow problem is solved using artificial neural network. The results are compared with conventional method. The neural network is trained using the data obtained from Newton-Raphson method. The trained network is used to provide the solution of the load flow problem.

In many industries power management is important factor for load analysis. In this project we will work on power quality importance and its usage in industries. This system is tested with the existing system values which showed a improved performance.

download Artificial Neural Networks trained load flow analysis Project Reference document.

Posted on

Field I/O and Logic I/O Boards in Programmable Logic Controller

Project Description: The aim of Field I/O And Logic I/O Boards In Programmable Logic Controller project is to design and implement application logic for controlling certain parameters solenoid valves,fans,heaters,dampers etc.

. In existing system manual methods are used for controlling these systems. In present electrical systems relays are mostly used for controlling these systems. In order to switch on and off these systems relays are used where there is no need of mechanical work involved it works on programmable logic controller.

With the introduction of Programmable logic controllers it had became a important part of electrical control systems. Using PLC’s can reduce cost of complex systems and increase flexibility.

download Field I/O And Logic I/O Boards In Programmable Logic Controller project reference document.

Posted on

Simple Passive Lossless Snubber for High-Power Multilevel Inverter Project Abstract

Simple Passive Lossless Snubber for High Power Multi Level Inverter is a power electronics project which is used for reducing electrical transients. In electrical devices variations in voltage an power causes serious damages to equipment and it will delay in work process so in order to solve this problem snubbers are used with inductive load. 

Posted on

Non Uniform De Blurring for Shaken Images Mat lab Project

Non Uniform De Blurring For Shaken Images paper explains about proposed new algorithms which can convert blurred images in to normal high quality images. There are two reasons for image blurring firstly due to 3D movement of the camera while taking a moving picture and second one is due to noise inside image. Images that are cause blurring effect due to camera are non uniform across the image. In present de blurring methods only uniform blur kernel are converted . In this paper we are proposing new methods for non uniform blurred images.

This new par materialized geometric model we calculate rotational velocity of the camera at the movement of image capture and apply these calculations to our algorithm.

In this project we analyze the output of camera blurred image and regular noise related blurred image from newly implemented algorithm and compare with the existing algorithm. Result shows new method is more efficient

download reference documents and sample mat lab code for reference.

Posted on

Over/ Under Voltage Protection of Electrical Appliances Project

Over/ Under voltage protection of electrical appliances projects main idea is to implement a electronic circuit which can disconnect power supply form electronic appliances like television, refrigerator ..etc when there is low power or high power. In this project IC LM324 operational amplifier is used as comparator. Basically IC LM324 consists of four operational amplifiers among them only two of them are used in this project. Inverting and Non- inverting terminals are maintained at 6.0V and 6.8V respectively.

In this paper we will cover working principle of the project with circuit diagram. Turning on and off of appliances will depend on the voltage level variations when voltage exceeds 6.8V then non inverting terminal to automatically turn of the device similarly if the voltage level is decreased less than 6.0V same functionality is continued.

download Over/ Under voltage protection of electrical appliances project report