Tag: ETABS

Welcome to 1000 Projects Civil Engineering Projects Section. Here We Provide a Complete Civil Engineering Master Of Technology (M.tech)/B.Tech Projects With a Specialization In Structural Engineering.

These are the below Civil Structural Projects available. Call or Mail us for more details about these B.E/B.Tech / M.E/M.Tech Projects

1. Analysis of Jacketed Reinforced Concrete Columns under Axial Load using Finite Element Method
2. Dynamic Evaluation of Reinforced Concrete Frames with Infill Subjected to Blast Loading according to IS 4991-1968
3. Finite Element Modelling of Reinforced Concrete Building Structures
4. Parametric Investigation of Water Tank Design using Genetic Algorithms
5. Impact of Shear Wall Placement on Lateral Load Performance of Building Frames
6. Examination of Structural Behavior of Cable-Stayed Bridges with Different Deck Profiles
7. Design and Analysis of Affordable Multi-Story Buildings using STAAD Pro
8. Modelling, Analysis, and Design of Residential Multi-Story Buildings
9. Seismic Analysis of Multi-Story Buildings with Symmetrical Plans in Earthquake Zones III
10. Analysis and Design of Water Storage Tanks.
11. Seismic Response Investigation of Multi-Story Buildings
12. Analysis of Piled Raft Foundations with a Geo-Structural Approach
13. Experimental Study of Concrete-Filled Unplasticized Polyvinyl Chloride (UPVC) Tubes
14. Comparison of Analysis and Design between a Composite Structure and a Reinforced Concrete and Steel Structure
15. Comparative Study of Optimizing the Super-Structural Design of Multi-Story Reinforced Concrete Buildings
16. Comparison of Seismic Performance in Irregular Reinforced Concrete Buildings
17. Design and Analysis of a G+12 Building with and without Floating Columns
18. Assessment of Progressive Collapse of Reinforced Concrete Frames using Non-Linear Dynamic Approach
19. Non-Linear Time History Analysis of Tall Buildings with Mass, Stiffness, and Vertical Irregularities
20. Analysis and Design of Cooling Towers using STAAD Pro and ETABS
21. Design and Analysis of Composite Steel Girders for Road Bridges
22. Analysis of Box Culverts with Different Aspect Ratios of Cells
23. Outrigger Structural System Analysis
24. Analysis of Multistable Structures using Commercial Software
25. Comparative Analytical Study of Seismic Response in Steel, Concrete, and Composite Buildings
26. Analysis of Durability Parameters of Geopolymer Concrete using Ground Granulated Blast Furnace Slag (GGBFS)
27. Analysis of Piled Raft Foundations on Winkler’s Linear Spring Bed using SAP2000 with Piles Modeled as Nonlinear Springs and T-Z Approach
28. Comparative Analytical Study of Seismic Response and Cost of Multi-Story (G+12) Reinforced Concrete, Steel, and Steel-Concrete Composite Buildings.
29. Analyzing the Impact Loading Response of Reinforced Concrete Frames with Finite Element Analysis
30. Examining the Buckling Behavior of Self-Stressed Concrete Columns Reinforced with PVA through Finite Element Analysis
31. Assessing and Improving the Durability of Concrete Structures
32. Evaluating the In-Situ Compressive Strength of Concrete with Brick Chips using the CAPO Test
33. Comparing Structures with Different Infill Materials using ETABS
34. Investigating the Flexural Behavior of RC Beams Strengthened with FRP
35. Studying the Strength and Durability Properties of Steel Fiber Reinforced Self-Compacting Concrete
36. Upgrading Corrosion-Damaged FRCM Structures through Retrofitting
37. Utilizing Alkali Resistant Glass Fibers in Concrete
38. Enhancing Concrete with Alkali Resistant Glass Fiber
39. Designing RCC Bridges for Resilience against Flash Floods
40. Developing Ultra High-Performance Concrete for High Strain Rate Impact Resistance
41. Experimenting with Permeable Concrete using Recycled Aggregates
42. Analyzing the Failure Mechanism of Steel-Concrete Composite Interface with Finite Element Analysis
43. Assessing the Stability of Precast Retaining Walls with a Performance-Based Finite Element Approach
44. Enhancing Confinement and Ductility of Circular Columns
45. Investigating the Influence of Nano Silica and Nano Alumina on the Packing Density of Cement Paste.
46. Simulating the Penetration of Projectiles on Concrete Panels Using Abaqus
47. Investigating the Effects of Changing Box Cell Configuration in Double Box Cell Type Bridges
48. Evaluating the Performance of Steel-Concrete Composite Bonded Specimens Under Slant Shear Loads
49. Designing Multi-Storeyed Buildings Based on Performance
50. Real-Time Monitoring of Steel Bar Corrosion in Concrete Using Piezoelectric Sensors
51. Analyzing and Retrofitting RCC Buildings for Seismic Resistance Using Various Techniques
52. Assessing Seismic Performance of RCC Box Girder Bridges with Different Support Conditions
53. Analyzing the Stability of a Gravity Dam Using MATLAB Programming
54. Examining Stress Concentration Issues in Girder Bridges
55. Studying the Seismic Response of Horizontally Curved Bridges with Skewed Abutments
56. Investigating Cost-Efficiency of Buildings in Different Indian Geographical Locations by Utilizing Concrete Wastes
57. Analyzing the Types, Behaviors, and Designs of Retaining Wall Structures with Software
58. Testing and Utilizing Concrete Block Technology Materials
59. Utilizing Waste Foundry Sand in Concrete Paver Blocks
60. Investigating the Remedies and Effects of Floods on Bricks and AAC Block Walls in Residential Buildings
61. Seismically Analyzing Floating Column Buildings
62. Examining Aerodynamic Instabilities in Cluster Buildings
63. Optimizing Truss Bridge Cost through Analysis and Use of Hollow Sections
64. Comparing the Nonlinear Finite Element Analysis of Square and Circular Steel Base Plates on Leveling Nuts using ANSYS
65. Studying the Effect of Nano Silica and Nano Alumina on Ultra High-Performance Concrete
66. Investigating the Effects of Corrosion on Reinforced Concrete with Steel Fiber and Mineral Admixture Additions
67. Performing Finite Element Analysis of a Beam with a Corrugated Web for a Jib Crane
68. Examining the Mechanical Behaviors of Confined Circular Columns
69. Investigating the Mechanical Behaviors of Rectangular Beams
70. Analyzing the Multi-Support Excitation of Steel I Girder Bridges Under Spatially Varied Earthquake Ground Motions
71. Modeling Concrete’s Response to Blast Loading
72. Investigating the Effects of Partially Replacing Cement and Sand with Biomaterial and Glass Waste in Concrete
73. Assessing the Performance of Metal Foam Composite Panel Shear Walls
74. Designing Pound Control for Elevated Bridges Under Seismic Excitation
75. Examining the Response of Transmission Line-Tower Coupled Systems to Multi-Support Excitations
76. Analyzing the Response of Underground Tunnels to Uniform and Multi-Support Excitations
77. Modeling Soil-Track Interactions to Study Ground Vibrations for High-Speed Trains
78. Studying the Stochastic Response of a Curved Dam to Spatial Varying Earthquake Ground Motions
79. Investigating the Properties of Concrete with Partial Replacement of Cement with Sugarcane Bagasse Ash.