Universal Serial Bus (USB) Seminar Report

Introduction to Universal Serial Bus :

It is an interface unit for transmission of data in between the devices and host computer. We can connect to low power consumption devices without the use of external power supply. USB can connect to certain devices without the use of specific preinstalled drives .it allows may peripherals connect to a standardize interface socket which improves the plug and play capabilities.

Architecture and structure:

The design of USB consists of hub, host and a device, by which the transfer of data is possible.

HUB:

The electrical interface between the host and USB is provided by HUB. It monitors the aspects like, continuity, power management, connect and disconnect direction and bus fault detection. It supports speed, which include high speed and low-speed data transmission the host HUB communication is maintained by HUB controller.

HOST:

It consists and super speed host and non-super speed host which provide the backboards capability. The super speed supports transfer of data is duplex mode. It maintains flow of control in between host and USB. It acts as a power provides to the USB device.

DEVICE:

The  device acts as source for information unchanged. These acts as pipes  through the host communicate. It allows certain functional topologies for which single function and multiple function peripheral devices can be performed. The architectural view of USB and has eight primary conducts and there twisted single pair. The different data pair cables are employed by which the transmission error can be reduced. 

Download Universal Serial Bus (USB) Seminar Report.

Advanced Wireless Security System Project Report

Introduction:

Advanced Wireless Security System Project model is to provide security at different locations thru wireless network. By using this technology we can detect the natural calamities like floods , earthquakes and accidents and bomb blasts occurred can rescued on time. This is an effective system for providing security at various places. The sensors present at various places detect the changes in the environment and sends the information to the control unit.

Construction and working:

We use transmitter unit for transmitting the sensed information, and the receiver unit or the control unit processes the received information. A 89C52 microcontroller is used for monitoring the components. The sensed information from sensors is given to the micro controller and encoder encodes it onto the RF transmitter antenna. At the receiver the decoder decodes the received information to detect the location. A LCD is used in the receiver unit to see the messages. By using the address codes we can know the exact location on the map. RF modules are used for transmission as these signals are free from interference.

Applications:

This type of systems are very useful for detecting the natural calamities so that we so that we save some lives. These also detect the accidents occurred and we can know the location so that we can save the people met with the accident. This type of systems is very useful for detecting the disasters in the nature.

Download Advanced Wireless Security System Project Report.

Seminar Report on 3G and 4G Technology

Seminar Report on 3G and 4G Technology  covers details about different levels of development. Below we provide detailed explanation on development stages.

Introduction to 1G and 2G:

The 1G system are analog systems which use radio signals for communication. FDMA technique is used for transmission of signals. In 2g systems digital radio signals are used for communication. TDMA and CDMA techniques are used for transmission of signals.

Features and Drawbacks of 1G and 2G:

In 1G only phone calls are possible and it has many drawbacks like poor quality of signal and noise interference. In 2G along with phone calls , voice mail and email messages were included. It has a transmission speed of 10kb/sec. in between 2G and 3G 2.5G has come which has GPRS technology and has transmission speed of about 64-144kbps. It include facilities like web browsing and navigation facilities.

Overview of 3G and 4G:

In order to meet the growing network demands 3G technology has come into existence. It has additional features like video calling, fax and TV streaming and high speed web. It has a browsing speed of about 144-2mbps. In 3G WCDMA technique is employed which allows multiple users on a common carrier signal.

Coming to 4g technology VSEOFCM technique is employed for data transmission. It has a band width of 5.20mhz and transmission speed of about 100mbps. But for the usage of 3G and 4G technology the networks has to be modified and 3G compatible phones has to be used for accessing. At present only some of the countries has switched to 3G technology and the companies started modifying the networks for the wide spread use of 3G technology. The call charges are a bit higher when compared to that of 2G networks. Thus we can conclude that the usage 3G technology has many features and reduces the loss of time for data transmissions.

Download Seminar Report on 3G and 4G Technology.

Insulation and Manufacturing Process Of 500mw Turbo Generator Bars Project Report

Introduction to Turbo generator:

A turbo generator converts the mechanical energy into electrical energy. A turbo generator is a turbine which is directly connected to electric generator for generation of electricity. Here the turbine is driven with an electric generator. The mechanical motion is created in the turbine by using heat , water vapor or nuclear power, the created mechanical motion is fed to the shaft of the turbo generator and this converts the mechanical energy to electrical energy.

Insulation and manufacturing process of turbo generators:

The turbo generator consists of coils which are made of copper. As the no of coils increases the speed of the turbo generator increases. The 500mw turbo generator consists of 42 coils. The coils are insulated by using nomex paper. This is supplied with a pressure of 480 tons. A exciter is of two different lengths are present . A hydro generator winding section is present in the generator which consists of permanent magnet generators. It is used as a exciter for the magnet. The turbo generator rotor  is filled with hydrogen gas which prevents the coils from decaying. The turbo generator operates at a frequency of 50hz. The rotor present inside the turbo generator rotates with a speed of 3000rpm. A certain number of tests like mechanical test and load test ,bearing test, OC test are performed before the turbo generator is released , in order to know output efficiency. The 500mv generator has a stator voltage of 21kv.

Areas of implementation:

The turbo generators are used in generation of power in power plants. It can be used in different kind of power plants like coal or nuclear or wind or hydro. Because the mechanical energy generate from any source is driven into turbo generator to generate electricity.

Download Insulation and Manufacturing Process Of 500mw Turbo Generator Bars Project Report, pdf,ppt.

Haptic Systems Electronics Seminar Report

Introduction of Haptic systems:

Haptic system electronics seminar topic explains about a device provide touch based perception of virtual objects. The research on haptic systems started in 1970’s and various applications are being developed on this concept. The model of haptic system consists of human part and machine part. The human part senses the controls of the position of body parts , while the machine part exerts force to stimulate contact with virtual object.

Haptic system working process:

The human part and machine part are connected with an interface tool.

Haptic information:

With this information only the simulation only the stimulation is provided to virtual objects. It consists of two information’s one is tactile information which provides information from sensors connected to the body, and kinesthetic information acquired from sensors in the joints.

Virtual reality:

In this the user can interact with computer stimulated environment, which is an imaginary world. The virtual reality environments are displayed on computer screen or stereoscopic displays.

Haptic rendering:

This is an algorithm, which computes sensing forces between the haptic representation and virtual environment. In this we find collision detection algorithm and force response algorithm which are used to find responses from virtual object.

Applications of haptic systems:

The haptic system are used in medical field where a surgeon located from any place can perform operation with a virtual robot located at the hospital . it is used for training pilots where a virtual imaginary world is created , where they can feel the experience of flight. These are used in video games.

Download Haptic Systems Electronics Seminar Report.

Final Year Electrical and Electronic EEE B Tech & BE project

The final year Electrical and Electronic EEE B Tech & BE project is based on Analysing of Bangladesh power system. The data is based on their requirement of the major components and according to full details from the Power Generation Company Bangladesh (PGCB).

Company all the major components like Buses,Generator,TapTransformer,Capacitor,Motors and Loads are given the counting by the company itself But, this tool is Identify to analyse contingency of the power system. To do this we take details from the database.

Total Project Report Components & Roles:

The Major role is to perform the selection operation from the database.to, perform this suitable software to analysis this which new product available in market. Select all the information from the PSAF. The PSAF (power system application Framework)This framework is taking care of the table entry data and picture or graphical mode data ,the diagram which are in single line for drawing options other one is Generating for report to simulation. The framework is developed by CYME international TD Inc. This is the tool we can use for perfect matching in Bangladesh system to collect. The version is used for this PSAF 2.81(Revision 2.8).this is the overall operation to perform the PSAF.

The constructing the data base data should select the suitable for the software, it come constructing the network, we provide all the information from the PGCB in PSAF. All the network select can run the process of the simulation. The Simulation is the process which is run the real time process on all time, and this takes the abstract level of the system all the times. Simulation take the all the information form the source.

By taking the data from the table creates low power voltage problem. By this we can use to solves the problem is Newton-Rap son, and this the method take all the fault conditions and solves the first.

Download Engineering Final Year Electrical and Electronic EEE B Tech & BE project Report, Abstract, Documentation and PPT Seminar.

Paper Presentation For EEE

List of paper presentation for eee students: 

This  category consists of collection of paper presentation for eee(electronics and electrical engineering) students. Students can download these seminar topics with designed paper presentation. These seminar topics also contain project related information for eee students.

                          submit paper presentation for eee students to us. 

Links to download paper presentation for EEE students:

  1. Solar Voltaic Lighting Systems Mini Project
  2. Efficient On-Chip Crosstalk Avoidance by Using Codec Design
  3. Wireless Electronic Notice Board Mini Project
  4. Automatic College Bell using RTC ECE Project and paper presentation for eee students
  5. Face recognition project Abstract
  6. PC based SCADA implementation Using Micro controller Seminar Topic
  7. Pc Regimented Defense Android Using Zigbee seminar topic and paper presentation for eee students
  8. Student Administration Automation System using RFID system
download more related paper presentations for eee students.

PC Controlled Wireless Multipurpose Robot for Surveillance System

In this project ‘PC controlled wireless multipurpose robot for surveillance system. The main feature of this project is to control the robot with PC through wireless. As it is a wireless robot it can be easily mobilized and can be controlled.

With the improvements of new technologies in communication and high performance systems we can implement faster and smarter robots using new robot control devices new drivers and advanced control algorithms.

It consists of many sensors, laser and many things. These all things run by using Zigbee technology. We dedicated our project to all soldiers out there by which many lives of soldiers can be saved.

This project works on 8-bit micro controller. This robot works on the information drawn over the surface. In this robot we use PIR sensor for detecting objects surrounded by the robot.

download PC controlled wireless multipurpose robot for surveillance system Project report

Related Project Reports:

PC Controlled Temperature and Obstacle Sensing Robot Project Report

Final Year Electrical Projects

 Final Year Electrical Projects List:

This category consists of Final Year Electrical Projects 2010,2011,B.tech final year Final Year Electrical Projects download, Final Year Electrical Projects ideas and abstracts.

  1. POWER DISTRIBUTION AT NFC EEE Final Year Project
  2. MODELING AND SIMULATION OF SPEED OF A DOUBLY FED INDUCTION MOTOR
  3. WIRELESS ENERGY TRANSMITTER WITH TARIFF SYSTEM
  4. SUMMER TRAINING REPORT ON COMMUTATOR AND BRUSH FAILURE
  5. STUDY AND CONSTRUCTION OF TEMPERATURE CONTROLLING ELEMENTS AND CIRCUIT
  6. SPEED SENSORLESS SEPARATELY EXCITED DC MOTOR DRIVE WITH AN ADAPTIVE OBSERVER
  7. SOLAR POWER GENERATION WITH AUTO TRACKING SYSTEM
  8. SOC ESTIMATION OF RECHARGEABLE BATTERIES
  9. SIMULATION OF EXTRA HIGH VOLTAGE LONG TRANSMISSION LINES
  10. Revolutionary Development & Working of Rifle
  11. RENEWABLE SOURCES OF ENERGY EEE Summer Project Training Report
  12. Summer Training Project Report on Real Time Clock (RTC)
  13. Pulse Width Modulation (PWM) Btech EEE Final Document
  14. POWER MANAGEMENT SYSTEM IN BPCL
  15. POSITION CONTROL OF MANIPULATOR USING PMAC WITH DC SERVO MOTORS
  16. PHASE ANGLE CONTROL OF SCR USING AT89C51
  17. MULTIPLE DEVICE SWITCHING THROUGH PC
  18. LOW COST AUTOMATIC ENERGY EFFICIENT EMERGENCY LAMP USING PULSE WIDTH MODULATION
  19. INTELLIGENT SECURITY SYSTEM
  20. INDUSTRIAL STORE KEEPING BY AUTONOMOUS GUIDED SYSTEM
  21. INDUSTRIAL FAULT INDICATION SYSTEM WITH OVER VOLTAGE OVER TEMPERATURE
  22. IMPLEMENTATION OF MOBILE PHONE Project
  23. HUMAN DETECTION ROBOT Electrical Project Idea
  24. HEAVY ELECTRICAL INDUSTRY IN INDIA
  25. HARMONIC ANALYSIS OF SEPARATELY EXCITED DC MOTOR DRIVES
  26. FABRICATION OF AN AUTOMATIC BATTERY CHARGER USING SCR
  27. DIGITAL PHASE SELECTOR EEE Student Project
  28. DESIGN OF TURBO-ALTERNATOR USING C-LANGUAGE
  29. CUSTOMER OPERATED ENQUIRY TERMINAL Final Year EEE Seminar Project
  30. CONTROL ELECTRICAL APPLIANCES USING PC Student EEE Projects
  31. COMPLETE SELFPROTECTION TECHNOLOGY TO MINIMIZE THE FAILURES OF DISTRIBUTION TRANSFORMER
  32. AUTOMATIC COLLEGE BELL Electrical Student Project
  33. AN ULTRAHIGH-SPEED LOW POWER ELECTRICAL DRIVE SYSTEM
  34. A VEHICLE TO VEHICLE COMMUNICATION PROTOCOL FOR CO-OPERATIVE COLLISION WARNING
  35. A HYBRID WIND-SOLAR ENERGY SYSTEM EEE Btech Project Abstract
  36. Project Report On Transformer Protection Using Numerical Relay
  37. Project Report On Study Of Co-Gen Power Plant
  38. EEE Project Report On Stepper Motor Control Through Rf Link
  39. EEE Project Report On Solar Tracking System
  40. Powerline Voice And Data Communication For Device Operation
  41. Project Report On Power Grid Control System Using Gsm Modem
  42. Project Report On Over-Under Voltage Cut-Off With On-Time Delay
  43. On Line Measurement of Power Quality Parameters Using Signal Processing Techniques
  44. Project Report On Laser Assisted Machining Of Inconel 718
  45. Project Report On Networked Control System
  46. Project Report On Mitigation Of Power Quality Issues
  47. Project Report On Microcontroller Based Voltage Measurement
  48. Microcontroller Based Semiconductor Tap Changer For Power Transformer
  49. Project Report On Microcontroller Based Dc Motor Speed Controller
  50. Project Report On Message Scrolling On Lcd Using Arm Controller
  51.  Project Report On Luminous Power Technologies
  52. Project Report On Intelligent Robot
  53. Project Report On Intelligent Power Meter
  54. Project Report On Intelligent Energy Saving System
  55. Project Report On H-Bridge Fed Dc Motor Speed Control
  56. FULLY AUTOMATED BURNER MANAGEMENT SYSTEM USING PLC
  57. Project Report On Energy Harvesting From Passive Human Power
  58. Project Report On Electric Motors
  59. Electric Locomotives Energy Management MRVC Traction Installation
  60. Project Report On Design Of Energy System
  61.  Project Report On Desertec The Next Gen Green Power
  62. DENSITY SENSED STREET LIGHT INTENSITY CONTROL TO SAVE ENERGY
  63. Project Report On Control Of Dc Fan
  64. COMPUTER AUTOMATED DRYER FOR THIN LAYER GRAIN DRYING
  65. COMPUTER AIDED DESIGN FOR A PV SYSTEM AND INVESTIGATION OF 3 PHASE THYRISTOR CONVERTER
  66. Project Report On Carriage And Wagon Workshop Dahod
  67. Project Report On Automatic Sun Tracking System
  68. Project Report On Automatic Pressure Controller
  69. Automatic Power Factor Corrector Using Capacitive Load Bank Project Report
  70. Project Report On Windmill Speedometer With Frequency Counter
  71.  Project Report On Voltage Sag Report
  72. Project Report On Uninterruptable Power Supply (UPS)
  73. Project Report On Transformer Overload Alert
  74. Project Report On Static Converter For Railway
  75. Project Report On Sound Operated Switch Using A Simple Transistor Circuit
  76. Project Report On Solar Power Water Pumping System
  77. Project Report On Solar Cooker Using Parabolic Reflector
  78. Project Report On Solar Based Led Lighting Scheme
  79. Simulation and Fault analysis of HVDC on MATLAB
  80. Project Report On Schmitt Trigger
  81. Project Report On Remote-Controlled-Screw-Jack
  82. Project Report On Real Time Operation Of Circuit Breakers
  83. Project Report On Protection Of Low-Voltage Dc Micro-Grids
  84. Project Report On Gas Plant
  85. Project Report On Power Limiter
  86. PIC BASED INTELLIGENT TRACKING SYSTEM USING SOLAR POWER
  87. Project Report On Pc Based College Premises Position Locator
  88. Project Report Naval Technological Innovations
  89. Project Report On Nano Solar Energy
  90. Modeling and Analysis of SVPWM Based Dynamic Voltage Restorer
  91. Microcontroller Based Power Monitoring For 600kva Battery Back Up
  92. Project Report On Wireless Equipment Control AT89C51
  93. STUDY OF SUBSTATION EQUIPMENT AND PROTECTION
  94. Project Report On Study Design Of Inverter
  95. Project Report On Long Hual Optical Fiber Transmission Network
  96. INVESTIGATION OF ALTERNATORS ENCOUNTERED HARMONICS
  97. Project Report On Maintenance Of Power Transformer
  98. Project Report On High Altitude Platform Stations (HAPS)
  99. HEALTH PREDICTION OF THREE PHASE INDUCTION MOTOR USING FUZZY LOGIC
  100. GENERATOR PROTECTION IN BPCL- OCHIREFINERY USING NUMERICAL RELAY
  101. GENERATION OF ELECTRICITY USING TIDAL POWER EEE Report
  102. Project Report On Flexibleac Transmission Systems (Facts)
  103. Flexible Display EEE Project Report
  104. Project Report On Energy Saving Through Counter
  105. Btech Final Year EEE Project Report on Energy Efficient Electrical Drives
  106. ELECTROSTATIC MICRO POWER GENERATOR FROM LOW FREQUENCY VIBRATION SUCH AS HUMAN MOTION
  107. BE EEE Project Report On Construction Of Transformer
  108. Project Report On Computerisation Of Machine Lab
  109. Project Report On Coin Based Mobile Charger
  110. BULLET PROOF VEST USING CARBON NANO TUBES
  111.   Batteries That Charges On Air EEE Final Project Report
  112. Project Report On Automated Multistoried Car Parking System
  113. Project Report On Automated Electricity Meter
  114. Project Report On Analysis Of Low Dynamic Power Listening Schemes In Wireless Sensor Networks
  115. Project Report On Agriculture Aid -Seed Sprinkling And Crop Care-Taking Mechanism
  116. EEE Project Report On Advances In Renewable Energy Source
  117. FIRE SENSING AND CONTROL Robotics Project.
  118. MODERN HOME (AC/DC) AUTOMATION USING GSM MODULE Abstract.
  119. EMBEDDED PASSWORD BASED SECURITY DOOR LOCK SYSTEM USING AT89s52
  120. INTRUDER ALARM SYSTEM Abstract
  121. MANCHESTER CODE DECODING CONTROLS THE ROBOT DIRECTION BY TV REMOTE
  122. AUTONOMOUS ROBOT Project Abstract.
  123. Blind Stick Robot projects Abstract
  124. RFID Based Home/Office security system Project Abstract.
  125. Vehicle Accessing Using Authentication Project Abstract
  126. Industrial Safety Measures System With Sensors And Webcam Abstract
  127. Super Intelligent Robot Using Smoke Sensor And Light Projects Abstract.
  128.   Infra-ray Based Control System
  129.  Intelligent automatic plant Irrigation system with water pump control
  130.   A Control Design for Vehicle speed with Multilevel using RF Technology
  131.   Green House Environment Control projects
  132.   Implementation of CDMA System Using Gold Code Spread Spectrum
  133.   Digital Dice Game Project
  134.   Nuclear Radiation Detection and Tracking through Motes for Preventing from Nuclear Terrorism project
  135.   Inter Integrated Circuit Mini Project
  136.   RF based servo and DC Motor Controller system for spy plane Project
  137.   SMS Based electrical billing System
  138.   Linear Induction Motor Used For Two Wheeler Application
  139.   IUPQC (Interline Unified Power Quality Conditioner) Project
  140.   Frequency counter Using 8051 Microcontroller
  141.   Multichannel Wireless PLC Based DC Motor Protection EEE Project
  142.   Rate Allocation and Network Lifetime problems For Wireless Sensor Networks
  143.   Nanotechnology in Waste Water Treatment Project Report
  144.   RFID Based Ration Card ECE Final Year Project
  145.   RFID Based Road Toll Tax ECE Final Year Project
  146.   Time Operated Appliances Control ECE Project
  147.   Thyristor ECE Seminar Report
  148.   Project on A Data-Centric Multi-Hop MAC Protocol for Underwater Acoustic Sensor Networks
  149.   RFID Based Telemedicine System ECE Seminar Project
  150.   Microcontrollar Based Digital Clock with Alarm Project
  151.   Wide Range Tunable Band Pass Filter Seminar Topic
  152.   Wireless Data and Voice Communication through Infrared-LED Project
  153.   Teleportation ECE Seminar Report
  154.   Electronics Voting Machine ECE Project Report
  155.   Electronics Cash Register ECE Seminar Project
  156.   SuperSpeed USB Final Year ECE Seminar Project
  157.   Spatial Noise Shaping Based On Human Visual Sensitivity Project
  158.   SMS Based Stepper Motor Control ECE Project
  159.   SMS Based Railway Reservation System ECE Project
  160.   SMS Based Generator Start up System ECE Project
  161.   SMS Based E-Notice Board for College ECE Project
  162.   Short Range Personal Radar ECE Final Year Project
  163.   Segmentation of Pathological and Healthy Tissues Seminar Project
  164.   Secured Wireless Transmission Electronics Seminar Project
  165.   Satellite Communication Systems ECE Project & ppt
  166.   Remote Controlled Electronic Switching System ECE Project
  167.   PC To PC Optical Fiber Communication ECE Project
  168.   PC Based GPS Microcontroller Project
  169.   PC Based Appliances Controller ECE Project
  170.   Optimization and Automation of Water Cooling Facility Using PLC Project
  171.   Project on Online Clock Skew Scheme for Asynchronous Wave-Pipelined Circuits Using FPGA
  172.   Obstruction Detection & Auto Solving Vehicle ECE Project
  173.   Muscular Stimulator Electronics ECE Project
  174.   Multiuser SMS Based Wireless Electronic Notice Board Project
  175.   Moving Object Detection Based On Kirsch Operator Combined With Optical Flow Project
  176.   Mobile Tracking System Project
  177.   Mobile Phone Power Management System Project
  178.   Mobile Internet Technology for Intelligent Transportation Systems
  179.   Mobile Communication Cell Electronics Project
  180.   Microcontroller Based Plant Irrigation System BE ECE Project
  181.   Microcontroller Based Digital Code Lock ECE Project
  182.   Microcontroller Based Automation of Drip Irrigation System Project
  183.   Machine Understanding of Indian Spoken Languages ECE Project
  184.   Long Flashover Arrester (LFA) ECE Project
  185.   Location Management in Mobile Computing Systems
  186.   Location Based Spatial Query Processing In Wireless Broadcast Environments
  187.   Load Monitoring and Breaker with Digital Display Using Microcontroller
  188.   Linear Feedback Shift Register (LFSR) Project
  189.   Line Man Security system Electronics And Communication Engineering Project
  190.   LCD Interfacing Using At89c51 Industrial Training at BSNL
  191.   Lasers for Wireless Power Transmission Electronics Project
  192.   KLT Feature Tracking Algorithm in Embedded Hardware
  193.   Jetking Computer Hardware Networking Institute Project
  194.   IR Remote Control Devices ECE & EIE Final Year Project
  195.   ECE Project on IR Based Trace Passing Alarm
  196.   ECE Project on Introduction to Remote LAN Networks
  197.   Interfacing GSM Mobile to PC to Send the SMS from PC Project
  198.   Intelligent Vehicular Monitoring Using Multi-Hop Wireless System
  199.   Intacell a Fully Adaptive Approach To Smart Antennas Project
  200.   Initialization Based Test Pattern Generation For Asynchronous Circuits
  201.   Inferring Body Pose without Tracking Body Parts Project
  202.   Industrial Automation through Internet ECE Final Project
  203.   Impact of Rushing attack on Multicast in Mobile Ad Hoc Network ECE Project
  204.   Image for Conclead Weapon Detection ECE Project
  205.   FM Based Campus Communication System ECE Project
  206.   IR-2110 based squarewave inverter by using 555 Timer
  207.   PLC Controlled In D1 Charging Conveyor For Blast Furnace In Vizag Steel Plant
  208.   Sensor less Vector Control of Induction Motor EEE Project
  209.   project on Overview of Srisailam Powerhouse and 220KV Switchyard
  210.   Wireless Robot controlling Data Acquisition to PC Instrumentation Project
  211.   EEE (Electrical) Project Titles
  212.   PWM Based Automobile Braking System With Distance Measurement
  213.   Speed Control Of D. C. Motor Using Thyristor Dual Converter
  214.   Stores Management System Project
  215.   Speed Control Of DC Motor By Using PWM Technique EEE Project

Electronics Seminar Topics

This category consists of Electronics Seminar Topics with PPT download,Electronics Final Seminar Topics,Electronic seminar topic 2010 and 2011.

  1. NANO TECHNOLOGY BASED DATA STORAGE Final Year Seminar Topic
  2. Visa Processing A .Net Project.
  3. Electro Dynamic Suspension Electro Magnetic Suspension
  4. Distributed Virtual Disks
  5. Distributed Computing and Advantages & Distributed Systems Architecture
  6. Distributed Computing
  7. Digital Signature
  8. Cryptography Digital Signature IT Seminar Downloads
  9. Processing Methods of Digital Image Processing
  10. DATA MINING Engineering Seminar Report
  11. Cryptography in Smart Cards ECE CSE Seminar
  12. ZIGBEE TECHNOLOGY Seminar Presentation
  13. Wireless Communication Red Tacton
  14. WIRELESS POWER TRANSMISSION AND RECEPTION USING SPS & RECTENNA
  15. WiMax CSE Power Point Presentation
  16. Seminar on UNDERWATER WIRELESS COMMUNICATION
  17. Worldwide Interperability For Microwave Access WiMAX
  18. VLSI Seminar Report
  19. Distributed Computer Systems Final Sem Btech Presentation
  20. Distributed Packet Switching for LAN Ethernet Seminar Report
  21. Automation of Cars- Embedded Systems Seminar For Electronics Students
  22. Embedded System Design and Challenges
  23. What is Embedded Systems Computers Electronics Seminar Topic
  24. All about Embedded Spiking Neural Networks
  25. Security Issues in Mobile Ad hoc Networks Final Presentation Report
  26. All About Network Security and Cryptography CSE Student Seminar
  27. Network Security Seminar and Cryptography Seminar
  28. Network Security and Cryptography Technical Paper
  29. CSE Seminar 2012 on NETWORK CUSTODY SYSTEM
  30. Nanotechnology Presentation For ECE & CSE Students
  31. The Scope of the NanoTechnology Presentation CSIT
  32. Nano Technology and Photonics Communication
  33. Nanotechnology and Bimolecular Motor Powering Nanobiotechnology
  34. NANOTECHNOLOGY AND CRYONICS Seminar Projects
  35. Molecular Nanotechnology Engineering Technical Seminar Topics
  36. Nano Technology Document For Students Switching Application
  37. Nano technology Nano Tubes Nanorings Download CSE Seminar Reports
  38. Digital Signal Processing and Multimedia
  39. ITANIUM- The 64 bit Microprocessor CSE-ECE Technical Topic
  40. Mobile Ad-Hoc Networks Extensions to ZONE ROUTING PROTOCOL
  41. ZIGBEE TECHNOLOGY CSE Seminar Topic-Idea-Abstract
  42. XML-Web Services CSE Seminar Idea-Abstract
  43. XML- Extensible Markup Language Seminar
  44. WORLDWIDE INTEROPERABILITY FOR MICROWAVE ACCESS (WIMAX)
  45. ELECTRICITY THROUGH WIRELESS TRANSMISSION ECE-CSIT Seminar Idea
  46. WIRELESS TECHNOLOGY FUTURE SCOPE MCA Seminar Abstract
  47. 4G MOBILE COMMUNICATIONS WIRELESS MOBILE COMMUNICATIONS PPT
  48. Wireless Internet Telephony BE Seminar Abstract
  49. WIRELESS COMMUNICATIONS WIMAX B tech Seminar Abstract
  50. Wireless Application Protocol-WAP MCA Seminar Idea
  51. WiMAX Technology For a Wire-Free World IT Seminar Topic
  52. WiMAX and Other Technologies Seminar
  53. WORLDWIDE INTEROPERABILITY FOR MICROWAVE ACCESS WIMAX
  54. WI-FI Technology BE Final Seminar Report
  55. CSE Seminar Topic on Voice over internet protocol (VoIP)
  56. Voice Over Internet Protocol Btech Seminar
  57. VLSI IMPLEMENTATION OF DIGITAL IMAGE SEGMENTATION ALGORITHM FOR GRAY SCALE IMAGES
  58. VLSI GSM CDMA Technology Btech Technical Seminar
  59. VLSI DESIGN FLOW AND VLSI DESIGN CSE ECE Seminar Topic 
  60.  Nuclear Radiation Detection and Tracking through Motes for Preventing from Nuclear Terrorism project
  61. Automation Fan and Light Control For Industrial Appliances ECE Project
  62. Nanotechnology in Waste Water Treatment Project Report
  63. RFID Based Railway Reservation System ECE Project
  64. RFID Based Ration Card ECE Final Year Project
  65. RFID Based Road Toll Tax ECE Final Year Project
  66. Time Operated Appliances Control ECE Project
  67. Thyristor ECE Seminar Report
  68. Project on A Data-Centric Multi-Hop MAC Protocol for Underwater Acoustic Sensor Networks
  69. Microcontrollar Based Digital Clock with Alarm Project
  70. SMS Controlled Vehicle Ignition System for Safety ECE Project
  71. VLSI For Neural Networks And Their Applications Seminar Project
  72. Walking Stick With Heart Attack Detection ECE Seminar
  73. Wide Range Tunable Band Pass Filter Seminar Topic
  74. WIMAX-The Revolution in Wireless Communication Seminar
  75. Wireless Data and Voice Communication through Infrared-LED Project
  76. The Security Analysis of Graphical Password Seminar
  77. The Automatic Sensor Bridge ECE Project
  78. Text Extraction System ECE Seminar Topic
  79. Telepresence ECE Seminar Report
  80.   Teleportation ECE Seminar Report
  81. Telephone Operated Devices ECE Project Report
  82. Electronics Voting Machine ECE Project Report
  83. Electronics Cash Register ECE Seminar Project
  84. SuperSpeed USB Final Year ECE Seminar Project
  85. SMS Based Stepper Motor Control ECE Project
  86. SMS Based Railway Reservation System ECE Project
  87. SMS Based Generator Start up System ECE Project
  88. SMS Based E-Notice Board for College ECE Project
  89.   Short Range Personal Radar ECE Final Year Project
  90. Segmentation of Pathological and Healthy Tissues Seminar Project
  91. Secured Wireless Transmission Electronics Seminar Project
  92. Satellite Communication Systems ECE Project & ppt
  93. RFID Based Railway Platform to Display the Exact Position of Coach
  94. RFID Based Prepaid Energy Meter ECE Project
  95. RFID Based Banking System ECE Final Year Project
  96. Remote Control via Internet ECE Project
  97. Production and Broadcasting of TV Programmes Project
  98. PC Based GPS Microcontroller Project
  99.   PC Based Appliances Controller ECE Project
  100. Optimization and Automation of Water Cooling Facility Using PLC Project
  101. Project on Online Clock Skew Scheme for Asynchronous Wave-Pipelined Circuits Using FPGA
  102. Office Automation System Project Report
  103. Obstruction Detection & Auto Solving Vehicle ECE Project
  104. Obstacle Avoiding Robot using 8051 Project
  105. Network Security Protocol with Cryptography and RFID System ECE Project
  106. Netware Communication System ECE Project
  107. Muscular Stimulator Electronics ECE Project
  108. Multiuser SMS Based Wireless Electronic Notice Board Project
  109.   Moving Object Detection Based On Kirsch Operator Combined With Optical Flow Project
  110. Mobile Tracking System Project
  111. Mobile Phone Power Management System Project
  112. Mobile Internet Technology for Intelligent Transportation Systems
  113. Microcontroller Based Plant Irrigation System BE ECE Project
  114. Microcontroller Based Digital Code Lock ECE Project
  115. Microcontroller Based Automation of Drip Irrigation System Project
  116. Machine Understanding of Indian Spoken Languages ECE Project
  117. Long Flashover Arrester (LFA) ECE Project
  118.   Location Management in Mobile Computing Systems
  119. Location Based Spatial Query Processing In Wireless Broadcast Environments
  120. Load Monitoring and Breaker with Digital Display Using Microcontroller
  121. Linear Feedback Shift Register (LFSR) Project
  122. Line Man Security system Electronics And Communication Engineering Project
  123. LCD Interfacing Using At89c51 Industrial Training at BSNL
  124. Lasers for Wireless Power Transmission Electronics Project
  125. KLT Feature Tracking Algorithm in Embedded Hardware
  126. Jetking Computer Hardware Networking Institute Project
  127. IR Remote Control Devices ECE & EIE Final Year Project
  128.   ECE Project on IR Based Trace Passing Alarm
  129. ECE Project on Introduction to Remote LAN Networks
  130. Interfacing GSM Mobile to PC to Send the SMS from PC Project
  131. Intelligent Vehicular Monitoring Using Multi-Hop Wireless System
  132. Intacell a Fully Adaptive Approach To Smart Antennas Project
  133. Initialization Based Test Pattern Generation For Asynchronous Circuits
  134. Inferring Body Pose without Tracking Body Parts Project
  135. Industrial Automation through Internet ECE Final Project
  136. IR-2110 based squarewave inverter by using 555 Timer
  137. Utilize Distributed Power Flow Controller (DPFC) to Compensate Unbalanced 3-phase Currents in Transmissions Systems