Category: CSE Mini Projects

Download All CSE Mini Projects documents,.Net CSE Mini Projects,ASP.Net Mini projects,C++ Mini Projects,Java Mini Project. Students can find latest topics on networking ,

Posted on

Support For Host Any cast Priorities And Naming Of Link Local Addresses In Ipv6 IIT Project

Introduction to Support For Host Any cast Priorities And Naming Of Link Local Addresses In Ipv6 Project:

The issues related to the the internet have raised a lot as it were not edited during the design of the protocols. The version 4 of the internet protocol faced both the problems of flexibility and scalability. Efforts are being made to make a more advanced version of the internet protocol that can overcome the limitations of the present version. This will also be a safe future extension and it will be one of the best designs for the next generation IPv6.

The supporting and base protocols are standardized. Various issues that have been raised are being worked on and three such issues have already been studied and implemented. Firstly the support for name service for linking the addresses of the local, secondly, support for the addressing based on the host anycast. These require modifications at different stages of IPv6 stack like the network, device, API, BSD and layers of application. The implementations can be used with these issues for experimenting and it helps to make a better understanding and fesialibility. It will easily enable to tune to the requirements of the individuals. Linux 2.1.21 based IPv6 stack were implemented for the testings of the mechanism.

After having a look at the salient features of the system that are targeted to achieve an array of objectives which are laid out for the purpose of a next generation IP. Three experimental studies of the  issues were focussed in this thesis. Along with the host anycast problem a solution to the problem is found.

According to the discussion it is clear that these cannot be used as a datagram source or as destination address in the communication. Requirements regarding both the points of communication that is the ancient host and some other communicating host are specified. Here we are focusing on the UDP and TCP transport protocol.

Download Support For Host Any cast Priorities And Naming Of Link Local Addresses In Ipv6.

Posted on

Samba Search Engine B.Tech NIT Mini Projects In Computer Science

Introduction to Samba Search Engine Mini Projects:

This software is used for searching the files in the network of a local area especially where the server of the samba is installed. The files can be shared in a machine that enable samba network and in a windows machine. Smbclient program is used by the program and it gives the results in a formatted manner. The output result of the query is relevant to the matter and is also presented in a proper manner. Using the Tcl and TK script the graphical interface is developed for the users.

Samba is simply an SMB server that is developed by Andrew Tridgell for UNIX. It is maintained by a group of people located all from all over the world. Lunix, HP-UX, DEC OSF/1, Digital UNIX, SunOS, etc are some of the variants of UNIX. The problem of searching the network samba for files can easily be cope us with the software.

As the output is printed to get relevant information therefore the time taken for searching is quite long. An index document organizes files in such a predetermined way that a search engine starts searching for the files that matches the criteria entered by the users on the system. Installation of samba network is done in systems in order to facilitate inter operating system communication.

SMB protocol is the base of samba servers. Here the client has mounted  the share directory of a particular file. Therefore searching becomes a tedious job with samba and this problem can be tackled with the use of samba tools known As Smbclient.

Posted on

A Device Mapper based Encryption Layer for TransCrypt NIT Final Year Project Report

At the present time data security is given the utmost importance. Files by encrypting have been designed that will enable to solve the problem. Data security is an important fact and it is necessary to showcase it in a transparent and secure manner. Similarly, TransCrypt is also a type of encrypting file that is implemented in kernel space. Moreover it has an advanced management system that is specially formulated for a scenario in the enterprise.

It uses the keys of cryptography that enable flexible sharing and also the supervisor is not included in the trust model. The Linux kernel of version 2.6 implemented for the transcript system and during this implementation various changes were made to the existing system of the kernel. It helps in embedding the functionality of the transcript system.

The modifications also make several changes especially in the I/O behavior of the files. This adds a layer of cryptography that enables to perform decryption and encryption of the data files. The modified kernel has various drawbacks from the aspect of maintenance, performance and functionality. Moreover, in this paper a new cryptographic layer is proposed that will help the transcript file system. As a kernel module this layer is implemented and it also does not me, and any kind of modification to the present code of the kernel. The omnipresent use of data storage in computers has increased the need of data security in various scenarios.

The system of transcript provides efficient storage facility and also a safe and secure way to address the importance of the security of data. The dependence of transcript implementation earlier was based on the page cache and this led to the introduction of a new cryptographic layer that is based on the mapped infrastructure device of the kernel. This further improves the performance of the transcript file.

Posted on

RSBScript Project Idea for Final Year CSE Students

Introduction to RSBScript Project:

RSSBus provides internets and enterprise information sources with ready to use connectors and at the same time it also hides the difference of access protocol and organistaion of data. This is a suite of information that enable to access products with its ready to use the service. Simple services constructions are made with the use of connectors which in return give data as items. This is also an extensive list of name and value pairs.

The simple service items act as table and it is easy to combine or feature them in any kind that your clients prefer. RSS 2.0, JSON, CSV, ATOM and CSV are some of the RSSBus servers and apart from this several other formats are also used directly to help of spreadsheets, applications, [portals, browsers and RSS readers.

The most format that are simple and effective is the RSSBus service that combines information and also makes it easy to mix from several sources. Usually these connectors and read and write information perfectly thus making it easy to broadcast the updates in several connectors sequences of chain calls to create a complex information prservices of processing.

The new concept of RSBSsriot is used to serve as an introduction and demonstrate the uses of RSSBus services. The RSBScript makes use of directory listing for demonstrating service development which includes simple services that takes action for URL command response, HTML template pages for producing contain item data that includes HTML pages, RSS feed generation for using information sources for producing RSS feeds and lastly the information flows for combining capabilities of RSSBus to create applications. The user guide for RSSBus is quite useful and it enables students to have a clear idea about the system. Moreover various tutorials and stepwise guides are available for clear understanding of this topic. 

Posted on

CSE Final Year Project on RSA Secure Chat Server with Report

Chat servers are now easily available and it enables people to connect with one another. It makes it easy for conversing with those who stays far away or even near by at low costs. AOL is a kind of chat service that helps in conversion with people within real time. Moreover, this service provides possibilities of host for school, work and connectivity.

Privacy is not provided in this widely available facility of chat. Whatever is sent and exchanged through the chat server is not secured at all. This project is designed in order to make the servers of the chat system more secure for the users. Public key encryption is used for this purpose that help to send messages through chats all across the world.

The chat service has various benefits like it allows instant exchange of messages between people. It enables in quick responses and group chats. The real time system helps to reduce the cost of expenses through the system of chatting. Usually this is not a secured way of communication but only till when it is written in plain text. But on the other hand, if it is intercepted it can make the message exchange more safe and secure.

The best part of encryption is that it requires less time for processing as chat messages are not very long. It also helps every message to be signed digitally and the utilization of public key encryption can securely transmit the message. Interception can occur but the message will not be able to decipher by the interceptor. Again, data insertion can take place but the use of digital signature ensure the authenticity of the message. There are various secure chat protocols that enable the users to chat with one another. Chat servers have become very popular nowadays and it has become a common medium of conversion especially among the youth generation.

Posted on

RSA Encryption Project a Final Year Project Topic on Cryptography

Introduction to RSA Encryption Project:

The distribution of keys is the biggest cryptography problem. Like if you live in the united states and want to pass secret information’s to someone else who is residing in some other states the you must use some key formats for encoding and decoding the message. This key will be known only to both of you and if you do not want the hackers to cracker and decipher your key then keeps on changing the code from time to time.

But the problem is to tell the key code to the other person as if you mail then it can be stolen and if you send them cytographically then someone can easily break and get the code. So now there is no way out but just think if you have a  one way encoding and decoding system.

In this process encoding is easy and similarly decoding is difficult. It means that anyone can encode a message easily but only a single person can decode it and this system is known as “one way ciphers”. It I also called as “trap door ciphers”.  Here there is a key to individual cipher and also a separate key for decoding.

If you are aware about the decoding key then encoding can be easy for you but again doing the opposite is a troublesome job. Now again if you want to change a key then just make pairs of new keys and exchange only the encoding codes. If these cards are stolen then there is no problem because the person who will steal it can only use the message for encoding and under no circumstances he will able to decode it.  Encoding keys are also known as public keys and it can be published in any popular locations. In short, if you want to send  a secret message to someone then he is the only person who can decode and read it.

Posted on

Room Allotment System Report with DFD-ER-Sequence-UserCase Diagrams

Introduction to Room Allotment System Project:

When graduates join colleagues for the graduate degree they face a crucial problem of room allotment and it involves a huge array of processes and procedures. Depending upon these rules and procedures all the students other than the day scholars are allotted their rooms. This process is currenly pursued manually and as involves a lot of calculations therefore manipulation is also common. Computerization of the process of room allotments is a great way to reduce this complex structure to the a simpler procedure.

Important calculations and procedures are done by the room allotment system according to the procedures and rules of the nitc hostels. As per requirement it also produces the necessary documents. The main problems lie in the fact that it is difficult to design an effective and efficient room allot system that can provide the notice students as per their preferences and priority.

The system needs to keep a track of the number of students who stays in each of the hostel followed by proper allocation of generating rooms allotment reports and common hostel rooms when needed by the warden of the hostel. This project was designed in order to analyze the areas of potential application.

It also identifies the information economics about the dissemination, gather and complexity of processing and data as well as setting of priorities among all the applications/ the main motto behind the study of this paper is to find out whether the problem is curable or not with the existing technology and the constraints of the given schedule. A proper application domain understanding was the main focus area of this project and during this process informations are collected in detailed process by interacting with users like a hostel steward warden and others. It is followed by the identifying procedure of their problems and individual needs.

Posted on

CSE Project Idea on Robust Real-Time Super-Resolution on FPGA for Final Year Students

Introduction to Robust Real-Time Super-Resolution on FPGA:

The imaging system is generally based on a sensor known as image sensor which is a 2D array of pixels and enables to covert incident light to the electrical signal array. there are two kinds of resolutions that determine information quality collected by the sensor and it includes the temporal and spatial resolution. The spatial density of the photo dies and induced blur is responsible for the spatial resolution. An intuitive solution that is responsible for the spatial resolution enhancement is reducing the size of pixels thus increasing the density of the pixels. The smaller the photo dies the small will be the incident light amount. In order to get the desired signal it is important to make a longer exposure.

In absence of relative motion between scene and camera the light amount reduction can be easily determined by enhancing the pixel time of exposure which means increasing the time for integration of the photodiodes. In real either the camera shakes while taking the shot or the object is shaking during the period of integration. More number of my integration time spans require for real world frame. The result thus suffers from the motion blur reducing the temporal resolution.

In this thesis, an FPGA based motion deblurring system is proposed that make use of the image sensor configured with large pixel areas on the regions of motion. In order to compensate for the low spatial resolution FPGA based SR is used. The FPGA is implemented with the IBP algorithm and that too after modifying the account for the LR simple addictive noses. Various noise levels are evaluated for this system keeping in mind the several parameters like the initial kind of approximation.

LR sample numbers and the length of the words. According to the results which gives noise static informations in the algorithm enhance the properties of the process of interative dramatically, in the noisy environment. This also leads to a more profound scheme. 

Posted on

Rich Site Summary Perl MYSQL NIT CSE Final Year Project

Introduction to Rich Site Summary Perl Project:

The rich site summary project focus on producing softwares that make sure to keep the website for checking the updates as well as the RSS feed automatically. The RSS reader will surely parse the RSS feed and provides the user with the latest news and updates.

The most extensive used XML formats on the web is RSS. THE rss XTML describes a new style of searching web information’s and it also acts as a news fee. Usually this link consists of links and summaries of the new content of a web site.

As per the RSS feed back the generator can now easily generate the RSS files. It’s almost become difficult to manage the sites that are provided with more than thousand links and it is limited only up to a specific domain.  Almost more than half of the sites have useless links or links of other channels. It can also produce RSS generator that can help in generating the RSS feed for almost all the links. For the gcc gnu compilers site there is a selected domain and so for the morzilla web browser.

Open source is the restricted limit for the RSS reader and it includes newforge.net, morzilla.org, linux.com etc. the above mentioned sites is parsing the RSS feeds to the readers of RSS providing the latest up to date informations. According to the research it is said that the domain can be further extended  and it can also be used for generating RSS feedbacks in case the source can be found from where the update is made or at least a small description of the text. .9 is the standard feed generated value for this project that is allowed by the RSS. This can be a useful expansion for the users and it will also enhance the level of security.

Posted on

Resource Allocation Problem Using Adaptive Mobile NIT Final Year Topics for CSE Students

Introduction to Resource Allocation Problem Using Adaptive Mobile Project Topics:

A program naming mobile agent is based on autonomous movement and it migrates from machine to machine through a heterogeneous network. It interacts with services on each machine to perform the task desired by the user on his behalf. The environment in which the mobile agent operates keeps on changing because it keeps on moving from in a heterogenous network from one machine to the other. Adjusting in a dynamic environment and compatible with sudden changes are some of the main issues of this system.

There are different models designed for this system and adaptive mobile agent is one of them. This mobile agent creates a platform that helps in the migration features, tracking, adaptation and collaboration among the agents. Using the resource allocation problem this model has been tested thoroughly and as a part of the continuation of this work several other features like the courts of various mitigation, load condition that affects the system’s behavior etc. there is an existing phase in this continuation and that is instead of using a stimulator in order to simulate the condition of the environment for the system agent we can use a real network environment.

Different distributions can be used in order to simulate the tasks arrive in the simulator and this is one of the proposals for any continuation experiment. A study can be conducted to find out the distribution that competes easily with the conditions of the real network closely. Another work that can be done in the future is to change the simulator designs.

The current simulator is based on static design that means no changes can be made in the parameters of the simulation once the agent start the simulation process. A proposal is made to make this static based simulator to a dynamic one so that the parameter value can be changed as per required.