Category: Micro Controller Projects

Micro controller projects listed here are for electronics and electrical engineering students. Students can download Micro Controller Projects project reports, Micro Controller Projects list and Micro Controller Projects in c for free. Download All Micro Controller Based Final Year Electrical and Electronics Projects, Ideas, Abstracts.

Posted on

Real-Time Pedestrian Detection And Tracking At Nighttime For Driver-Assistance Systems

Infrared light is a light that is invisible to the naked eye in normal conditions. Since the light frequency is less than the visible light range. This has the same properties that a normal visible light has. We normally use this for security systems and other low range distance measurement systems. Here we are using the same IR light sensors that detect the obstructions and that is reflected back to the sensory unit that is fixed on the controller module. If the detected light intensity is high then it indicates that the obstruction is closer and that is sent to the analog to digital converter then the conversion is made that  in such a way that if the it makes the motor to drive in the in such a direction to make the avoidance with the abstraction.

REAL-TIME-PEDESTRIAN-DETECTION-AND-TRACKING-system

The controller will immediately send the signal to the motor in through a driver IC. This is a H-Bridge drive that makes the motor to control the in both the direction such that it has a fast control to the motor and that motor will drive the wheels through gears. This makes the rotation of the robot to control in different directions that is fed to the control. The reflected light is received with a sensor which gets activated to the IR beam. If the obstruction is on the left side then the controller will indicate the robot to take a right turn indicating the clearance on the other side. In this manner the robot is controlled and guides the blind to avoid the obstructions.

APPLICATIONS:

  • AUTOMOTIVE APPLICATION
  • HUMANS
  • OFFICES
  • LABS
  • HOME AUTOMATIONS
  • INDUSTRIAL CONTROLS
  • CONSUMER ELECTRONICS

HARD WARE:

  • AVR PROCESSOR
  • POWER SUPPLAY UNIT
  • INDICATION DISPLAY
  • GP2D12 DISTANCE SENSOR
  • BUZZER
  • GAIR MOTORS
  • DRIVER CONTROL 

SOFTWARE:

  • Avr studio4
  • STK200/300 PROGRAMMER
  • SERIAL COMMUNICATION PORT
  • SIMULATION TOOLS

download Real-Time Pedestrian Detection And Tracking At Nighttime For Driver-Assistance Systems abstract.

Posted on

Collide Vehicle Information Capturing Using GPS and GSM

Collide vehicle information capturing using GPS and GSM projects main idea is to provide hardware and software application for moving systems like cars , trucks which can sense accident information of the vehicle to the remote areas for saving there lifes. This application mainly works on GPS and GSM technologies, where GPS system communicates with satellites for finding out the longitude and latitude of the system. Whereas GSM is used for secure wireless transmission.

Variable sensors are used for finding out accident detector which will communicate with micro controller by taking input of the accident vehicle signal and compare it with threshold value if the threshold value is less then present value messages are sent to their relatives.

This application consists of :

Embedded Controller, AT Keyboard, GPS Receiver, Vibration Sensor, LCD Module, GSM Modem, Serial Communication, Keil Compiler.    

download Collide Vehicle Information Capturing Using GPS and GSM abstract.

Posted on

Railway Accident Monitoring System (GSM And GPS) Abstract

RAILWAY ACCIDENT MONITORING SYSTEM (GSM AND GPS)  project is implemented using PIC micro-controller, GPS receiver, GSM modem and LCD display is used to display the GPS receiver data. 

Objective is to develop a state-of-the-art asset management technology for railway transportation systems, with special focus on conditions in India. The technology consists of: GPS and wireless data transmission.

The central tracking station monitors train for 24 hours for unauthorized intrusion, pilfering, breakdown, accident or even for any unforeseen emergency assistance. By this way the railway asset can be monitored for protection purpose.

“Through proper implementation of this project, governments can improve program and infrastructure quality, increase information accessibility and use, With improved decision making application makes more interesting and decreases overall cost of the application, including the social and economic impacts of train crashes.” 

download Railway Accident Monitoring System (GSM  And GPS) Abstract

Posted on

Gps Based Highway Vehicle Monitoring System Abstract

GPS Based Highway Vehicle Monitoring System projects main idea is to develop a application using GPS and GSM technologies for tracking vehicles information on highway. In this project we use NAVSTAR GPS system which will help to calculate longitude and latitude of geographic location. GPS will communicate with 4 satellites to deliver Position information. Based on four satellites information is delivered it mainly depends on time clock.

This application uses MAX232 switch for connecting between micro controller and GPS device. These interfaces work on serial communication. Micro controller has UART in built in it.  1. longitude and latitude of geographic location. GPS will communicate with 4 satellites to deliver Position information. Based on four satellites information is delivered it mainly depends on time clock.

Software: 

  • KEIL UV2 IDE tool
  • Functionality of all above components
  • Embedded C programming 

Hardware: 

  • AT89S52
  • LCD
  • GPS MODULE
  • GSM MODULE
  • RS232
  • MAX232
  • RELAY 

 

Posted on

Design and implementation of Mobile detector in examination hall using graphical LCD (Abstract)

Design and implementation of Mobile detector in examination hall using graphical LCD (Abstract) As using of mobile phones in the colleges premises and in the examination halls are restricted. It sometimes it is not possible to detect the mobile phones with the students this project will solve that problem by automatically detecting the mobile phone and gives the alarm sound automatically.

 This project “Design and implementation of Mobile detector in examination hall using graphical LCD” used colleges for detecting the using of mobile phones and gives the buzzer sound simultaneously that information will be displayed on the graphical LCD.

SOFTWARE: Embedded ‘C’ Programming language.

TOOLS: Keil Software Product, uC Flash Software.

TARGET DEVICE: 8051 microcontroller.

APPLICATIONS:  It can be useful in School Examination halls, College Final Examination halls.

ADVANTAGES:  Automatic Detecting of the using of Mobile phone.

BLOCK DIAGRAM Contains:

  • Graphical LCD
  • 8051 Micro Controller
  • 555 Timer
  • Operational Amplifier
  • Buzzer

Download Design and implementation of Mobile detector in examination hall using graphical LCD Embedded Systems Project (Abstract)

Posted on

Library Automation Using RFID (Abstract)

In this LIBRARY AUTOMATION USING RFID (ABSTRACT) project the we are using the RFID technology for identifying the books and persons based on unique Tag number and LPC2148 Microcontroller which is ARM7 architecture will process the data and sends it personal computer side data base in which the data base will be maintained about the Person who is taking the book and which book he is taking and that data base will be updated when the book is returned.

SOFTWARE Requirements: Embedded ‘C’ Programming Language.

TOOLS Used : Keil software product, Flash Magic Application

TARGET DEVICE: LPC2148(ARM7) Microcontroller.

APPLICATIONS:Library Management System in the schools, colleges, Universities.

ADVANTAGES: Low price, automated easy way of updating the books taking and returning information

BLOCK DIAGRAM Contains:

  • POWER SUPPLY
  • RFID Reader
  • LPC2148(ARM7) Microcontroller
  • PERSONAL COMPUTER
  • LCD DISPLAY
  • Book’s RFID Tag
  • Student’s RFID Tag

Download Embedded Systems Final Year LIBRARY AUTOMATION USING RFID (ABSTRACT)

Posted on

Embedded GPS Based Vehicle Tracking System Abstract

Embedded GPS Based Vehicle Tracking System projects main idea is to develop a application which can help to track distance, traffic and position. This application works on GPS and GSM technologies.

A typical GPS receiver calculates its position using the signals from four or more GPS satellites. Four satellites are needed since the process needs a very accurate local time, more accurate than any normal clock can provide, so the receiver internally solves for time as well as position.

Initially the GPS continuously takes the data from the satellite and stores the latitude and longitudinal positions in microcontroller’s buffer. If we want to know the path of the vehicle we need to send a message to the GSM which gets activated by receiving our message. At the same instant the GPS gets deactivated with the help of relay.  As soon as the GSM gets activated it takes the last received latitude and longitude positions from the buffer and sends a message to the particular number which is executed in the program. After the message has been sent to the user the GSM gets deactivated and similarly the GPS gets activated. This is a cyclic process.

Software: 

  • KEIL UV2 IDE tool
  • Functionality of all above components
  • Embedded C programming

Hardware: 

  • AT89S52
  • LCD
  • GPS MODULE
  • GSM MODULE
  • RS232
  • MAX232
  • RELAY

download Embedded GPS Based Vehicle Tracking System Abstract.

Posted on

Two-Dimensional Position Detection System with Mems Accelerometer for Mouse Applications

Two-Dimensional Position Detection System with Mems Accelerometer for Mouse Applications (ABSTRACT) Mouse Initiative is a motion sensing glove with buttons on it that plugs into your computer to function as a mouse.  Accelerometers seemed to be the ideal sensor for constructing a hand-mounted pointing device.

The switches are used for incrementing and decrementing the mouse speed.This Project is the Best Selective Final Year Embedded project for Electronics & Mtech Bases Embedded Systems Students.

SOFTWARE: Embedded ‘C’ Programming Oriented Language
TOOLS: Keil Software Toll,Flash magic Software Tool
TARGET DEVICE: LPC2148(ARM7) Microcontroller.
APPLICATIONS: General usage of all Mouse Applications.
ADVANTAGES: Low cost Device, automated operation, User Friendly device,  Low Power consumption. More secure & Reliable.

Other Devices:

MEMS
Accelerometer
ARM Controller
Switches
Voltage level converter
Personal computer

Download Two-Dimensional Position Detection System with Mems Accelerometer for Mouse Applications Abstract

Posted on

Traffic Announcement through GSM Networks Abstract

Traffic Announcement through GSM Networks projects main idea is to provide information on traffic and distance between different vehicles around us while traveling. This application uses Collide vehicle information capturing using GPS and GSM technology for calculating distance accurately. This project will work on how this application works using micro controller.

In this system vibration sensors will sense collision distance and send information to micro controller by converting to digital data using ADC. Micro controller will compare input data with threshold data, If the data is more than threshold value than data is send to GPS via GSM for finding out location data. GPS system will communicate with Satellite to calculate accurate information. This process will be working continuously until the system is off.

This application  uses Embedded Controller,  GPS Receiver, IR Sensor, LCD Module, GSM Modem, Serial Communication, Keil Compiler.      

download Traffic Announcement through GSM Networks Abstract.

Posted on

Two Channel Temperature Logging for Furnaces (Abstract)

AIM:   The main aim of the TWO CHANNEL TEMPERATURE LOGGING FOR FURNACES Project is to develop a data logging system for furnaces in industries through wireless communication.

DESCRIPTION: In this 2012 project we are going to sense the information from the different sensors placed at the remote locations at the industry and that sensed information is send the PC present at the control room. Which has to be monitored by Engineers. Here the sensors we are using are the four temperature sensors connected to the furnaces in the industry that sensed information is send to the control room through the wireless communication technology .i.e., Zigbee. And that sensed information is displayed on the PC’s Hyper terminal.

The sensors information is given to the internal ADCs present in the LPC2148 microcontroller which converts the Analog to digital which will send to the zigbee for wireless transmission.

PURPOSE:

The purpose of this Embedded System Final Year project is to measure temperature values from different furnaces in industry and to send this information to the PC connected at the control room.

SOFTWARE USED:

  1. Embedded C
  2. Keil MicroVision
  3. Flash Magic

HARDWARE USED:

  1. 1.  Micro controller
  2. 2.  Power supply
  3. 3.  Temperature sensors
  4. 4.  MAX 232

TRANSMITTER SECTION:

  • POWER SUPPLLY
  • TEMPERATURE SENSOR1
  • TEMPERATURE SENSOR2
  • LPC2148 (ARM7) MICRO CONTROLLER
  • ZIGBEE

RECIEVER SECTION:

  • MAX 232
  • ZIGBEE
  • PC
  • POWER SUPPLY

POWER SUPPLY:

  • Step Down Transformer
  • Bridge Rectifier
  • Filter Circuit
  • Regulator section

RESULT:

             Hence, by using this project, the data is collected by the Control unit with the help of the RF communication. That data which is received is displayed on PC and can be stored for future reference.

Download Two Channel Temperature Logging for Furnaces (Abstract).