Category: Micro Controller Projects

Micro controller projects listed here are for electronics and electrical engineering students. Students can download Micro Controller Projects project reports, Micro Controller Projects list and Micro Controller Projects in c for free. Download All Micro Controller Based Final Year Electrical and Electronics Projects, Ideas, Abstracts.

Posted on

Microcontroller Based Digital Code Lock ECE Project

Security is the important issue in our routine life. Every people approaches to have security as much as possible. The access operation results in important connection under protective sequence. The microcontroller depends on Door locker which is the access control method and permits merely authenticate people to enter into the restricted place. The method is completely operated over 8 bit microcontroller AT89C2051 that includes 2Kbytes of ROM for the executable memory. The password is saved under the EPROM and hence we are able to modify it whenever we want.

 The system includes the Keypad with which the password is accessed by it. If the password gives in same like the password saved in the memory then the permission is granted to the person and hence the door gets opened. If password is wrong then the Alarm gets switched on.

“Password Based Door Security System makes use of Microcontroller” and it is utilized under the areas where we require much protection. It can be utilized to save the lockers and many other secured doors. The system includes many keypads and the keypads are connected to the 8bit microcontroller AT89C2051. It is the famous Microcontroller and has 20 pins and 15 input/output lines. The microcontroller includes the 2 Kilobytes of program memory. It constantly functions the keypad and.

Conclusion:

The electronic door lock is functioned the way we expect.  We can use it for the operations mentioned in our project.  The large obstacle to get rid of is interfacing the microcontroller including hardware elements.  The electronic door lock is marketable since it is simple to utilize because of less power consumption and greatly dependable.

Download Microcontroller Based Digital Code Lock ECE Project

Posted on

Microcontroller Based Automation of Drip Irrigation System Project

The green house depending on new agriculture companies are the current need under all portion of agriculture in India. The temperature and humidity of plants are accurately managed under this electronic. Because of variable environmental crises, these situations are different from one place to another place under great farmhouse that creates hard to sustain the stability at every place under the farmhouse.

As a result, there is severe requirement to prosper like Microcontroller based embedded method that can sustain the constant physical values and even can maintain the lists for examining reviews. The constant developing request of the meal needs the quick development under meal generation technology. In India, the economy basically depends on climatic situations and agriculture which are isotropic and yet we are unable to create complete utilization of agricultural means. The basic fact is the deficiency of rains and lack of land reservoir water. The constant extraction of water from earth has decreased the level of the water because of land that is resulting in the areas of un-irrigated land.

 One more essential fact is because of un-designed utilization of water because of important quantity of water that will be wasted. The important benefit is water is moved from the root area of the plants because of great amount of secured water.

Lack of water is detrimental to plants and lighter weight fruit and decreased developed cost does have little lack of water. This issue is identified on using automatic microcontroller that depends on drip irrigation method and irrigation would happen because of severe need of water.

Conclusion:

In this Microcontroller Based Automation of Drip Irrigation System Project, it is concluded that the information for the first the auto-control network for agriculture company that can provide conveniences to sustain constant atmospheric situations. The project also includes the method of irrigation and model methodology including construction.

Download Microcontroller Based Automation of Drip Irrigation System Electronics Engineering Final Year Project.

Posted on

Load Monitoring and Breaker with Digital Display Using Microcontroller

The basic goal of this Load Monitoring and Breaker with Digital Display Using Micro-controller project is to control the load electricity constantly and to secure the current devices from burning because of overloading.

This method of functional mechanisms little match for the companies such as furnaces, induction motors, ovens, broilers, and so on and are secured from overloading. Based on these load breakers, the common automatic fuses are ignored.

 The similar functional mechanisms are utilized for home applications. Presently, there are domestic electrical devices that burn due to load variations. Thus, the functional mechanism and load controlling are important needs to secure the electrical devices.

 CT (current transformer) is utilized to monitor the load electricity and it is linked in sequences with the load.  The electricity induced is directly proportional to the load current.

The output is transformed into DC with the help of filter and rectifier and the analog output is transmitted into the analog to digital converter to transform into digital pulses.

 The digital information is fetched into the micro-controller to have the important action as per received data. The micro-controller has the important part which is compared with the parameter values and program.

 The parameter chosen under this project is essential industrial parameter that requires constant check-up. The value of parameter is operated and displayed. As a result, the digital display gives the output of the micro-controller to display the current stream by the CT primary.

Conclusion:

 The Micro-controller is utilized for monitoring and function the load parameter.  Controllers are utilized to use the operation mechanisms.  It is essential to comprehend microcontroller to do the controlled mechanism.  It mentions model and growth of Load monitor and Breaker with Digital Display.

Download Load Monitoring and Breaker with Digital Display Using Microcontroller ECE Final Year Engineering Project Report.

Posted on

Line Man Security system Electronics And Communication Engineering Project

Security is the thing which is required for everyone indefinite of their functioning and post. Growth in electronic has created possible to separate the security based on the requirements. The line-man functions under technological station or in area lines are revealed to great electricity and present atmosphere. Thus, it is important to add full-evidence protective and security functional system. The important aim behind this project is to develop the old automatic operation mechanism utilized to turn OFF and ON the voltage supplies used for the lines under diverse sections.

The automatic mechanism such as liver/control rod kind of actuation mechanism utilized for control lines should be taken place through electronics mechanisms including digitalized functional architecture. The project is modeled to mechanically control the complete electrical operation station in the authorized and mechanical operation system.

 This Line Man Security system Electronics And Communication Engineering Project would possess the modules. They are microcontroller based control system, PC based information transmission and control system, automatic load shedding accomplished through software based Graphical system, authenticated lines giving asses by software based password.

The software module has the growth of Graphical User Interface system to shift the line actuation, Graphical User Interface system for authentication of mechanical systems to secure from unauthenticated people, and growth of software algorithms and functional laws to do the intelligent events such as feed back loop testing and automatic load diffusing.

Conclusion:

The Line Man Security system Electronics And Communication Engineering Project gives the productive and inexpensive method to manage the mechanism model to operate the function of diverse mechanical supply lines and giving the dedicated and accurate functional authorization to the lineman.

Download Line Man Security system Electronics And Communication Engineering Project.

Posted on

LCD Interfacing Using At89c51 Industrial Training at BSNL

The disapproving rates of the LCDs, capability to show the number, features, and graphics are in comparison with LEDs. These are ranged to numbers and some of the features.

In this present LCD Interfacing Using At89c51 Industrial Training at BSNL project, there are three important blocks. They are Power supply block, Controller block (AT89C51), and Display block. Power supply areas make use of IC7805, step down transformer, capacitor, and diodes for bridge rectifier. Controller block makes use of At89C51 controller IC which has four input output ports like P0-P3. This is the important section of LCD interfacing. Clock and Reset Circuit are made with the controller block. Display block makes use of 2-line and 16-character LCD including eight characters in one line.

LCD is utilized in airport, hospitals, railway station. It is also used in EPABX, telephone exchange, AC, refrigerator, software interface, and robotics. The circuit includes power supply, IC7805, bridge rectifier, capacitors, IC-7805, and controller section.

All the elements are connected by making use of circuit diagram. Now load the process in the controller IC, connect controller IC to the LCD, connect the 5V Dc supply to various parts of circuit, connect primary winding of the transformer to the code wire, switch on the power to provide the 230V AC to the transformer by making use of code wire, display message on LCD display, and turn OFF the power.

Conclusion:

The LCD Interfacing Using At89c51 Industrial Training at BSNL project is concluded on the LCD interfacing. This is expensive than the seven segment LEDs. Inclusion of a prompting administrator into LCD, hence the CPU is revealed to sustain the displaying of information. Execution is easy for the features and graphics.

Download LCD Interfacing Using At89c51 Industrial Training at BSNL ECE Project Report

Posted on

IR Remote Control Devices ECE & EIE Final Year Project

The remote control is the element of an electronics gadget and basically is the television set and utilized to manage the gadget wirelessly from the instance of little line-of-sight. The remote control is based on the controller or remote. This is called over several other names like flipper, converter clicker, didge, the tuner, or the changer.

 In real, the remote includes the operation controls and the managed gadgets include handful of important main controls. These remotes connect to their particular gadgets by infrared (IR) signals and radio signals.

Television IR signals is imitated over the worldly remote and can challenge the operation of great brand television remote operations. They are strengthened over small size batteries of AAA or AA.

If we want to know of the modern PC then we should know of the device ability which we are utilizing and we are able to perform it through learning the inner hardware model that is device architecture and to be aware of the size, number, and the register size.

The microcontroller is one chip which includes the non-volatile memory for the events (ROM or flash), the clock, processor (the CPU), and volatile memory for input and output (RAM), and an I/O control unit. This is also known as “computer on a chip” and numerous microcontroller units (MCUs) are implanted yearly under innumerable items from toys to automobiles.

Related Project:

Wireless Desktop Operation for PC using IR Remote

Conclusion:

Basically it is concluded that the remote controls are Consumer IR gadgets which are utilized to issue the orders from the distance to consumer electronics or televisions like DVD players, stereo mechanisms, and dimmers.

Commonly, these devices are small wireless and handheld entities including the array of buttons to manage many settings like track number, volume, and television channel.

Download IR Remote Control Devices ECE & EIE Final Year Project

Posted on

FM Based Campus Communication System ECE Project

The main aim of the FM Based Campus Communication System Final Year Main project is to establish a proper communication between required and predetermined points with negligible and high noise immunity. This Engineering Final Year Student Project consists of two sections FM transmitter and FM receiver. Transmitter are tuned to exact frequencies as desired individual transmitter will transmit at particular range of frequency’s, which can be varied by varying capacitance in each transmitter frequency are selected above 103 MHZ so that there is no interference with city standard fm transmitter radio. Tuning of receiver can be done to vary frequency of reception that is by varying gang capacitance. This FM Based Campus Communication System mainly useful in all Engineering Colleges & Universities to communicate each other.

Posted on

IR-2110 based squarewave inverter by using 555 Timer

Description of IR-2110 based squarewave inverter by using 555 Timer: An inverter is a device which converts dc voltage to output ac voltage at required voltage and frequency.The output ac voltage frequency can be fixed or varied .The variable frequency output voltage have several applications in conveyor,machine tool testing.This convertion can be done by controlled power on and power off devices like MOSFET and IGBTs.

IR-2110 is a high speed,high voltage power MOSFET and IGBT driver. This inverter converts the dc voltage into ac output voltage of squarewave pulses by using two jk flif flofs.

Dc signal is given to the 555 Timer,it produces squarewave pulses.these squarewave pulses are given to the two JK flif flofs,the two pulses are converted into four signals and are given to the IR-2110.From the inverter the signals are given to the four IGBTs,then the signal is converted to ac signal of required voltage and frequency.

Posted on

Industrial Robot Using Micro Controller

Objective:Industrial Robot projects objective is to develop a robotic application for industries which can move in circular, rectangular, angular straight line path and which can work on hard and plane surfaces.

Robot is integrated with different sensors which can sense parameters like temperature and detect fire and obstacles in its path.

Functioning:DC servomotor is used for controlling two pairs of wheels set to the robot. DC servomotor consists of wound armature and permanent magnet rotor. In order to control the speed of the DC motor pulse width modulation technique is used by providing dc supply to armature.

Micro controller is used to generate DC supply to robot in the form of pulse width modulated signal. This robot is useful for industries for sorting assembling and surveillance.

The following features can be provided in this project

Fire detection: 

In order to detect fire accidents Robot is assembled with photo sensor like LDR. When sensor senses fire it will send information to micro controller and then it will set on the buzzer.

Obstacle detection: 

For detecting obstacles in the path IR sensors are fixed with robots which will detect obstacles and set on the buzzer when the obstacle is cleared buzzer will off.

Wireless remote control: 

This robot runs using RF wireless technology, we can operate using a remote.

download Industrial Robot Using Micro Controller Project. 

Posted on

Industrial Power Management System

Design Objective of the Project:Industrial Power Management System project is a integration of different components like protective relays, remote I/O modules, Communications, monitoring, and engineering tool sets.

Industrial Power Management System project will provide you to develop and specify the most efficent, cost saving, and full-automated power management system useful for today. In order to develop this application we will specify major hardware required to develop a full featured power management system. Then under second stage we will explain on factors like economic benefits and reliability. 

This project completely involves in the monitoring of various parameters of powersystem and provides indication and control for the same.This project uses the powerful micro controller and the information gathered by the microcontroller is sent to the PC for processing.

Hardware requirements:

  1. RS232
  2. Micro Controller
  3. Signal Conditioning Circuits
  4. Analog Inputs
download  Industrial Power Management System Project.