Category: GPS Projects

This Project “Design and development of FPRS based visitor control for secured areas” is a reliable circuit that takes over the task of counting number of visitors very accurately and control the visitors

The main objective of this Final Year Project Report is to develop an access control system which will authenticate the users using FPRS and users can access using the embedded system. It can be useful in book tracking in libraries, employ time, attendance and access control, product tracking in product assembly.

 In this Embedded System Project we are going to develop embedded system which will authenticate the users using FPRS, so that the unauthenticated users can be avoided. Every user’s finger prints stored in the memory. When the user comes to secured areas like Atomic/ defence Establishments, he can put the finger on reader to access the particular place, FPRS reader will detect the user automatically, it will give the access. . When any visitor visits the counter is incremented by one and if the count exceeds the maximum value the Buzzer rings. The total number of interruptions is also displayed on the LCD. This will completely automate the access control process.

This Project can be used in defense & Atomic space Establishments, The main advantage & best feature of this project is more secure and allows only selected people into the prohibited premises. 

download FPRS Based Visitor Control For Secure Areas  Embedded System Abstract

Design And Development Of FPRS, RFID Based Petro Card System using of Finger print based bio metric systems also increasing the secure areas.

In this RFID Based Petro Card System project, RFID cards are used as prepaid petro cards , Finger prints are used to check for the authorized person(use full for avoiding misusing by others when the card is lost) . Using this technique each card’s number is assigned with certain amount of money depending upon prepaid money in the microcontroller’s memory.

In the petrol bunks, the customer can use card he can pay the bill from the pre paid card. He put the card at the RFID Reader and need to show finger print at finger print module, then user enters the how much amount petrol getting in to vehicle through the keypad in litters. Then the embedded system reduces the amount from the card and shows balance on the LCD display.

This Embedded System Project can be used at petrol bunks & Avoids carrying money every time.

download Design And Development Of FPRS, RFID Based Petro Card System Embedded System Final Year Project Abstract

This project “Design and development of fire detection FLYING Machine in deep forest” will be used for the detecting the fire in specified area in the forest by moving the robot to the different locations. Sensing of the fire will be done by moving the flying robot into the forest which is attached with fire sensor. And controlling of this flying robot will be by using the PC through zigbee based wireless communication protocol.

By using this project Easy way of detecting the fire in the forest by moving the flying robot to the different location in the forest.

The main application is to detect the fire in the building locations

Devices used in this Project:

• Block diagram:
• Fire sensor
• Motor Driving IC
• AVR Microcontroller
• Regulated Power supply
• Motor 1
• Motor 2
• Zigbee Transmitter
• Personal computer
• Voltage level converter
• Zigbee Receiver

download Design and development of fire detection FLYING Machine in deep forest Embedded System project Abstract

        Mobile robots perform various ways of tasks to serve humans such as home robot, inspection robot, security robot, school education robot, rehabilitation robot, and so on. The conventional mobile robots have used front-steering and rear- wheel driving mechanism to response all needed robot obvious motions, but the motion restriction is a major problem in the use of such mechanism. The omni directional configuration is a most suggested mechanism for mobile robot, which to have the capability of changing directions within the limited space in the indoor environment. 

             The ODMR (Omni directional mobile robot) uses IR sensor to sense the obstacle and send the obstacle distance signal to embedded controller. The embedded controller receives these obstacle detecting signals and then calculates the control signals to drive the motors to change the direction for the robot. ZigBee interface is also provided on the robot to give some control signals from the Personal computer attached with ZigBee enabled circuit. Using this ZigBee interface we can control the direction, speed for the robot. 

   In our proposed Implementation Of Obstacle Avoidance And Zigbee Control Functions For Omni Directional Mobile Robot  we are using ARM based microcontroller to control the IR sensor and robot Motors.Robot can move in any direction. But when any obstacle comes in front of the robot , IR sensor sense that obstacle and send appropriate signal to the microcontroller. Once the microcontroller receives IR signal then it itself having programe to give necessary control instructions to motor or it will send that IR detection signals to personal computer  using  wireless link of zigbee.PC having programe that  will provide  appropriate control signals to microcontroller using  Zigbee wireless link.After receiving this signal at microcontroller,it direct that signal to the motor. 

APPLICATIONS OF THE PROJECT: we can use these pc based robots in industries where it is impossible to the human beings.

ADVANTAGES OF THE PROJECT: Low cost, wireless and PC controlling.

DEVICES USED IN THIS PROJECT:

• PC
• XBEE
• LPC2148(ARM7) MICROCONTROLLER
• MOTOR1
• MOTOR2
• POWER SUPPLY
• IR Rx
• IR Tx

download Implementation Of Obstacle Avoidance And Zigbee Control Functions For Omni Directional Mobile Robot Abstract 

In this Controlling Robot By GSM SMS project we are going to control the ROBOT by using GSM SMS from the remote location. Commands received from the GSM mobile will be given to the GSM receiver. Whose signals will be given to the robot which consists ARM7 based microcontroller according the commands given from the GSM Mobile the robot will move. 

Applications of this Project: Used in the small scale & large scale industries where controlling of the robots is need to be done from remote location which longer distances.

BLOCK DIAGRAM CONSISTS OF:- 

• LPC2148(ARM7) MICROCONTROLLER
• MOTORS
• DRIVING CIRCUIT
• GSM
• POWER SUPPLY
• GSM Mobile

ADVANTAGES:. Works for the longer distances compare to the other wireless networks.

Features of this Project:  Works better for the longer distances compare to the other wireless networks.

download Controlling Robot By GSM SMS Embedded System Project (Abstract)

In this Develop A Multiple Interface Based Fire Fighting Robot Project we are using the fire sensor to detect the fire .when ever fire is occurred then the Robot will go to that particular area and the blower or LED will on otherwise the blower or LED is in the off state.

The main advantage of this  Fire Fighting Robot is low cost, all human will be safe in small scale industries, chemical laboratories,  gas companies, homes.

BLOCK DIAGRAM CONSISTS OF:

FIRE SENSOR
LPC2148(ARM7)
MICROCONTROLLER
BLOWER/FAN/LED
TEMPERATURE SENSOR
MOTOR DRIVER
MOTOR1
MOTOR2
REGULATED POWER SUPPLY
RF Receiver
RF REMOTE

contact us For more information about Develop A Multiple Interface Based Fire Fighting Robot project.

Download Develop A Multiple Interface Based Fire Fighting Robot Embedded System Micro controller Final year Project Abstract

This normal method voting technique has a possibility to leads to rigging. And actual person’s vote will be used by other persons. But this Design and Development of FPRS Based Electronic Voting Machine method of FPRS based Electronic Voting Machine will be used for maintaining more security. As finger prints are unique to each and every person, so non-other than the actual person can’t misuse the vote

BLOCK DIAGRAM CONSISTS OF:

• KEYPAD
  LPC2148 (ARM7) Microcontroller
  LCD
  FINGER PRINT
  FINGER PRINT READER MODULE
  REGULATED POWER SUPPLY

contact us For more information about Design and Development of FPRS Based Electronic Voting Machine project.

Download Design and Development of FPRS Based Electronic Voting Machine Embedded System Final Year Project Abstract

The main objective of this Biometric Finger Print Recognition Based Time And Attendance System Abstract project is to develop an embedded system, which will record the time and attendance of an employee in an organization and send monthly record of employee’s work hours and using finger print recognition.

          Whenever the employee enters the office he puts his finger on the embedded system, then the embedded system will recognize the person, it will register time of entry and attendance.

In this Embedded System Final Year 2012 Project we are using the microcontroller module for getting the attendance system and controlling the closing and opening of the door which is demonstrated using the LED on/off. And the attendance will be stored in the microcontroller’s memory.

ADVANTAGES: More secure & Safe because of fingerprints  which are  separate for each and every person.

contact us For more information about Biometric Finger Print Recognition Based Time And Attendance System Abstract project

Download Biometric Finger Print Recognition Based Time And Attendance System Embedded system Final Year Abstract

This project “Real time atomization of agriculture environment for social modernization of Indian agriculture” will be useful for monitoring and soil condition of the farm field through the GSM based wireless communication as well as controlling can be done automatically by providing the water to the farm filed by switching on the motor automatically.This project will help the formers to know the status of the form field from the remote location.

In this Embedded System Final Year Project we are going to use ARM7 based microcontroller which is the current dominant architecture in the embedded systems. And the microcontroller is the LPC2148 microcontroller. And Moisture sensor will detect the soil condition and that uses the internal ADC of the LPC2148. The application will be written in Embedded C language using the Keil(IDE) and loading of the hex file into the microcontroller can be done by using the Flash magic.

BLOCK DIAGRAM:

LPC2148 (ARM7) MICROCONTROLLER
RELAY
MOTOR
MOISTURE SENSOR
GSM MODEM
GSM MOBILE

contact us For more information about Real-Time Atomization Of Agricultural Environment For Social Modernization Of Indian Agricultural System project.

Download Real-Time Atomization Of Agricultural Environment For Social Modernization Of Indian Agricultural System Embedded System Final Year 2012 Project Abstract