Project Report On Maintenance Of Power Transformer

This Project Report On Maintenance Of Power Transformer project deals majorly with the performance, commissioning and testing of a transformer. There is a brief introduction to the regular maintenance of the transformer in a substation Renigunta 220/132/33-11 kv. A practical transformer is given here with all the parts and their protective devices. The typical test results are also available.

The transformer is a device that enables the transmission of electrical energy from one circuit to another circuit without any change in frequency. It is coupled electrically and magnetically separated. Actually, the transformer is an electromagnetic energy conversion device, because the energy is converted from the primary first magnetic energy is absorbed and then converted into usable electrical energy. Power transformer is one of the step-up or step down the voltage level on demand without changing the frequency.

At every step, whether the voltage level should have to be increased or decreased we need a transformer. If there is any fault or damage in the transformer then there will be heavy loss to the distribution system. So, periodical maintenance and testing is very important for a power transformer.

The report also explains the details of protection of transformer, principles, safety devices, Pressure relief valve, maintenance of transformer etc. The transformer mainly works on the principle of electromagnetic induction between two circuits linked by a common magnetic flux.

 Project Report On Maintenance Of Power Transformer Conclusion:

Power transformer is very important in the transmission and it must be monitored closely followed by their state during operation. In order to take remedial measure at appropriate times to avoid errors and increase reliability of service of the transformer. Hence the above tests which are detailed in this project would essential, if evaluated/ assessed, indicate the condition of the insulation which plays a major role for the service of power transformer and suggest the steps to be taken avoid the failure.

Download Project Report On Maintenance Of Power Transformer.

6 Replies to “Project Report On Maintenance Of Power Transformer”

  1. REQUIRED COMPLETE PROJECT REPORT FOR MAINTENANCE OF POWER TRANSFORMERS.
    LIKE REPAIRING, REWINDING, OIL FILTRATION, TESTING OF COMPLETE TRANSFORMER UNIT CAPACITY UP TO 50MW.

  2. I have to start power transformer repearing and reassembling workshop so send the project cost and regestration process

  3. I have to start power transformer repearing and reassembling workshop so send the project cost and Machinery required for repairing transformer

Leave a Reply

Your email address will not be published. Required fields are marked *