1000 Projects

This INDUSTRIAL AUTOMATION USING CAN PROTOCOL project is designed to control the DC motor based on the temperature changes using CAN protocol implementation.This projects main idea to manage DC motors according to the variations of temperature in a process industry. This application uses LM35 sensors which works as a I-C temperature sensors, Here the output voltage is directly proportional to Celsius temperature. The Temperature changes are measured by the ADC and transmitted to the other node using the CAN Bus and the data is received at the other node based upon the data received the speed of the DC motor is Regulated using the PWM (pulse width Modulation) Technique. This PWM is achieved by on Chip Timers.

AIM:

This AUTOMATIC ROOM LIGHT CONTROLLER WITH VISITOR COUNTER USING IR SENSOR project is designed and developed to control the ac power on/off with automatic room light using IR sensor.

DESCRIPTION: 

The light control depends on weather one person is in the room or not. Using ir sensor (tsop1738) we can find the person entered into the room or the person exit from the room; the no. of persons entered into the room counts by the micro controller and displays on the LCD. If any person entered, the ir sensor interrupts the micro controller then micro controller turn on/off the ac bulb by checking the count. In the absence of person in the room, the light automatically goes to the off position. For fast switching, we use triac ac control circuit resulting the power can save automatically.

COMPONENTS: 

• AT89S52 CONTROLLER
• LCD DISPLAY
• TRIAC
• IR SENSOR
• TINY2313
• IR RECEIVER(TSOP1738)

SKILL SET: 

• Functionality of all above components
• Embedded c programming

In this RF ID Based Office attendance Logger project we are going to develop an office attendance logger by using rfid reader. Every employee has a specific rfid card with unique employ ID. When ever he enters into the office the reader reads that id and stores the in time of the employee and if he leaves the office the system store the out time of the id.

     This application provides syncing method to computer using serial port communication. As every employs attendance details are stored in memory they can be erased any time after storing in computer. Data can be analyzed easily using this system. After memory is erased new attendance information can be stored in to memory.

APPLICATIONS:

• Item visibility and status
• Location tracking
• Access control
• Tractability

Robot Pick And Place Projects main idea is to develop a application which can reach places where humans cannot reach like space, hidden places, small tunnels. This Robot runs with human guidance.

 In this Robot pick and place application two servers motors are used to control the robot. Micro controller user’s kinematics algorithms to maintain position control on the motors. PWM channels of micro controller and MOSFET based power amplifiers and power transistors are used to control motors.

This robot is developed with two motors which make it more generic about hardware. All the logic is implemented in the software. That means by changing the software you can change almost everything as you like.

APPLICATIONS:

 Arc Welding

Assembly

Cutting

Dispensing

Finishing

Machine Load / Unload

Machine Tending

Material Handling

Polishing

Sealing 

Detailed working structure of robot is explained is document.

download  Robot Pick and Place Projects Abstract.

Related Projects:

Pick and Place Robot

Micro controller based Temperature Monitoring And Control Projects main idea is to develop a application which can automatically monitor parameters like temperature, water flow …etc.  This type of applications are helpful in industries for maintain security in product development process.

In general chemical industries depend on operators who will look after all this work by supervising temperature control or chemical level management but there are many cases these supervisors make mistakes. So it is better to implement a microcontroller sensor based systems which will look after all this work.

In this application user need to set maximum and minimum temperature limits based on their requirement which are called set points. Whenever temperature crosses this set points micro controller will set cooler to on which will cool the temperature. Similarly if temperature reaches less then set point micro controller will set heater on. 

Applications for this are Industries with heavy parameters to handle, complicated areas where we can’t monitor the conditions manually; these are Now-a-days used in all kind of industrial and commercial complexes.

download  Micro Controller Based Temperature Monitoring and Control Abstract.

PC Based Data Acquisition System Using SPI and I2C protocol projects main idea is to implement sensor system which can monitor parameters like temperature, pressure, humidity, light intensity …etc. In general sensors are effected by  atmosphere changes but these changes can be converted in to change in voltage.

Data Acquisition refers to reading the data continuously from any sensor. Here we are continuously monitoring the data through PC. We are concentrating mostly on serial communication. The data which we are receiving from the sensor is received by the microcontroller using ADC. Data monitoring is done in PC and for communication serial port communication is used. We can get the information like Date and Time along with our data.

 The data that is stored in the PC is easier to monitor or retrieve at any time compared to storing in a particular memory. Nowadays we are using the same process as storing the data in the PC in any kind of industries.

download  PC Based Data Acquisition System Using SPI and I2C protocol Abstract.

LPG gas detection projects main idea is to implement security system for detecting leakage of gas in closed environment. In this project gas leakage is identified by using sensors which works only in closed environment. In present situation there are many cases related to gas leakage which cause innocent people lives and property damage. Implementing this application can be useful for companies, houses, which can save lives of people.

                        We use 8 bit microcontroller to perform the desired task by interfacing Gas sensor, Buzzer and LCD to display. The output of the Gas sensor is in analog form which can be converted into digital form using MCP3201 which is an ADC (Analog to Digital Converter). Initially when there is a leak the Gas sensor detects it and gives voltage related to the amount of gas that is getting escaped from the apparatus. We create a set-point to the microcontroller so as if the Gas sensor gives the output above the set-point the controller drives the buzzer ON as an indication to the user.
                                 This can be used as an application in chemical and hazardous industries where there is a continuous need of monitoring the gas leaks. By using different kinds of sensors for every gas we can almost identify leaks for every kind of gases.

download  LPG Gas Detection Projects Abstract.