Category: Embedded System Abstracts

Electronics and electrical final year students can select best topic form embedded system abstracts listed below. Embedded system projects listed here are for free download. Students can select topic for mini and major projects on embedded systems.

Posted on

Air and zigbee to-zigbee Device Control Scheme for Single Media Multi Devices

This Air and zigbee to-zigbee Device Control Scheme for Single Media Multi Devices project demonstrates the concept of IR  and ZigBee to ZigBee Device control scheme for single media multiple devices, in which there are home appliances like air-conditioner, electric fan, audio, display device, electric lamp, curtain, electro motion chair, fragrance generator, flash light, fan heater and heater, etc. devices which are not in the line of sight and will present in different room in a home cannot be controlled simply by using IR whose distance will be short distance and line of sight only. This can be solved by the combination of IR and ZigBee. 

             In this proposed system we will give the control signals from the remote controller which is again given to ZigBee then to another Zigbee which may present out of line of sight. The second ZigBee will be connected to the different devices through Relays.

SOFTWARE USED: Embedded C Programming

TOOLS USED: Keil software , Flash magic software

TARGET DEVICE USED: LPC2148 (ARM7) Microcontroller device

APPLICATIONS: Can also be used in industries to control the different equipments.

ADVANTAGES: The distance of controlling can also be improved by connecting ZigBee modules in a network.

 BLOCK DIAGRAM CONTAINS:

  • REMOTE CONTROL (IR Tx)
  • IR Rx
  • LPC2148(ARM7) Microcontroller
  • XBEE
  • RELAY
  • DEVICE 1
  • DEVICE 2

Download Air and zigbee to-zigbee Device Control Scheme for Single Media Multi Devices Embedded System Final Project Abstract

Posted on

INFOPODS ZIGBEE-Based Remote Information Monitoring Devices

INFOPODS ZIGBEE-Based Remote Information Monitoring Devices: In general monitoring and controlling of the devices at the home for need to done at the device’s place only. We need to check for the device whether it is on/off and for switching on/off the device we need to go to the device place. But this project will provide the good solution for monitoring and controlling of the devices from the remote locations. This project consist two microcontroller modules which will communicate through zigbee based wireless communication. 

One microcontroller module will be connected to the device to which we need to monitor and control. And other embedded system device will be used for monitor and control the device which are at the remote locations.

PROGRAMMING LANGUAGE: Embedded ‘C’ language

TOOLS REQUIRED: Keil Software, Flash magic Software

DESTINATION DEVICE: LPC2148 microcontroller

APPLICATIONS: used in the home for controlling and monitoring of the different devices

FEATURES: Economical, portable and a low maintenance solution for greenhouse applications

Download INFOPODS ZIGBEE-Based Remote Information Monitoring Devices Embedded System Final Project Abstract

Posted on

DTMF BASED REMOTE CONTROL SYSTEM (ABSTRACT)

The main objective of this DTMF BASED REMOTE CONTROL SYSTEM project is to develop an embedded system which can control remote appliances remotely by using telephone line. In this Embedded System Project we are going to develop an embedded system which will control the remote appliances with the telephone lines. We can control more than 10 electrical Appliances;

In this Final Year Engineering project describes, through the telephones all the electrical system are control by remotely like light switches,air coolers, Washing Machines, Televisions, Small motors and etc……

First of all the telephone lines of data are transmitting through the transmitter by the encoder, it will encode the data without noise, and then the data will be received at the receiver, so that the receiving data is decode as original data of telephone line by the decoder, then the original data is stored in microcontroller and it will control the all the electrical system.

SOFTWARE: Embedded ‘C’ Language

TOOLS: Keil & flash magic Tool.

TARGET DEVICE: LPC2148  (ARM7) Microcontroller

APPLICATIONS: All Important Electrical appliances.

ADVANTAGES: Possible to control the Embedded device from the remote locations

Devices Used: 

  • TelePhone/ Mobile
  • LPC2148 (ARM7) Microcontroller
  • DECODER
  • Fan
  • Light
  • Air Conditioner
  • TV

Download DTMF BASED REMOTE CONTROL SYSTEM (ABSTRACT)

Posted on

DTMF Based Human less Boat Control For Oceanic Research Applications

The main aim of this Embedded system Mtech Final Year DTMF Based Human less Boat Control For Oceanic Research Applications Project is to using the Dual-tone multi-frequency signaling (DTMF) & find the boat position in the Ocean & control the boat without any human effort. This project is fully automated & no need of manual interaction. This Project is can be useful in all important Oceanic Research Applications. DTMF Encoder & Decoders used in this project these decoders & Encoders can be operated by Cell Phone where it has battery & Micro Controllers.

Instruments Used in this projects:

  • Dual-tone multi-frequency signaling (DTMF)
  • 89S52 Micro Controller
  • Radio frequency (RF) ENCODER/DECODER
  • 11.0592MHz Crystal Oscillator
  • Power – On Reset
  • H-Bridge Circuit
  • Motors

Download DTMF Based Human less Boat Control For Oceanic Research Applications Embedded System Project Abstract

Posted on

GPS-GSM Integration for Enhancing Public Transportation Management Services

GPS-GSM Integration for Enhancing Public Transportation Management Services (ABSTRACT): People those who are waiting for the buses at the bus stops for city or private buses will be looking eagerly for the bus they want to get in. But they can be able to trace the present location of the bus.

 This Final Year Engineering Embedded System project GPS-GSM INTERGRATION FOR ENHANCE PUBLIC TRANSPORTATION MANAGEMENT SERVICES will be use full to find out the current location of the bus on a particular route for city buses, private travels as well as RTC buses. This project contains two embedded system modules one will placed inside the bus and the other will be placed at the bus stops. The location of bus can be find out using GPS and can be sent to bus stop using GSM. Key pad will be helpful for location the location of the stop manually to the bus stop.

In this Public Transportation Management Services project we going use LPC2148 (ARM7) based microcontroller, which the current dominant microcontroller in mobile based products and software development Tool as  Keil, flash magic for loading hex file in to the microcontroller.

PROGRAMMING LANGUAGE: Embedded ‘C’ language 

HARDWARE TOOLS: Keil, Flash magic

DESTINATION DEVICE: LPC2148 microcontroller

APPLICATIONS: Public and private transportation

ADVANTAGES: Automatic way of finding the location of the vehicle

Embedded system module at the BUS stop: GSM MODEM, LCD DISPLAY, GPS RECEIVER, LPC2148 (ARM7) MICROCONTROLLER, SW1, SW2, SW3, REGULATED POWER SUPPLY

Download GPS-GSM Integration for Enhancing Public Transportation Management Services Embedded System Btech Final Year Project Abstract

Posted on

GSM based Parents tracking of the student attendance in college (ABSTRACT)

GSM based Parents tracking of the student attendance in college (ABSTRACT): It is time consuming task for the parents to check regular presence of the student to the college. And also for the college administrative people it is time consuming task to check each and every student attendance and marks to inform to the parents. But this project An Intimation to the parents about the bunking of the student for the college through GSM SMS will give and easy, low cost and automatic solution

In this GSM based Parents tracking of the student attendance in college System project we are going to use ARM7 based LPC2148 Microcontroller. The transmitting section consists of RFID module and GSM modem receiving section is the GSM based mobile phone.

Programming : Embedded ‘C’ Programming 

Hardware: Keil Hardware, Flash magic Hardware

Output: LPC2148 (ARM7) Microcontroller.

Advantages: Can be used in Schools and Colleges, Low price device, Fully automated, Reduce the burden for parents to know students attendance. 

BLOCK DIAGRAM: RFID Tag, RFID READER, LCD, LPC2148 (ARM7) Micro controller, GSM MODEM, REGULATED POWER SPPLY, GSM MOBILE.

Download GSM based Parents tracking of the student attendance in college (ABSTRACT)

Posted on

Design and Implementation of Short Message Query System for Academic Office Embedded System

Design and Implementation of Short Message Query System for Academic Office (ABSTRACT):  A query system based on the mobile network in gaining importance as mobile network is deployed everywhere. Also sending query SMS by mobile is very chip. This system is very useful for Academic offices like colleges and universities where same type of query is again and again asked by different students. Query may be related to education like exam date, time etc, Financial query like exam fee, Book query, or human query.

              In this system one gateway which is located at college or university is communicated to user mobile via GSM modem.  The gateway, which communicates with mobile phone via GSM Modem, receives the coded queries from users and sends packed results back. 

              The gateway may be connected to other gateway using internet connection to form a big network. The limitation of this system is that we can’t send big SMS, secondly we have to send SMS in predefines coded format which can be understand by gateway. The reply we get is also in the predefined format only.

                   The proposed system includes GSM modem and an ARM microcontroller based embedded board. The received SMS from mobile phone at modem send to embedded board. Embedded board having program that will send reply to predefined coded message. Software requirements applied for this project is  Embedded ‘C’ Programming Language, Hardware tools required for this project is  Keil tool &  Flash magic tool, The destination device to  display is LPC2148(ARM7)Microcontroller.

Applications & Advantages for this project are:

  • Real time automation Embedded project
  • Cheap cost & reliable
  • Secure & Safe device, Less power usage

Download Design and Implementation of Short Message Query System for Academic Office Embedded System Final Year Project Abstract

Posted on

GSM based Wireless Home Application Monitoring and Control System

GSM based Wireless Home Application Monitoring and Control System (ABSTRACT): GSM (Global System for Mobile Communications) is a low-cost hardware equipment to create a system for remote monitoring and remote control. The system can be controlled and monitored via Short Message Service (SMS) from anywhere that covered by GSM (Global System for Mobile Communications) service. Devices that connect remote monitoring and controlling of fans, TV sound, tube light, climate, door opening, closing and window’s and multimedia entertainment systems. In this project we are going to develop an embedded system, which will control all these devices with commands from a Remote device through GSM (Global System for Mobile Communications) communication.

In this GSM (Global System for Mobile Communications) BASED WIRELESS HOME APPLICATION MONITORING AND CONTROL SYSTEM project we are using ARM based microcontroller for controlling the equipments in the home. GSM modem is used to communicate and respond to the remote commands and those commands are sent to the processor. For example if we send 10 through the GSM the microcontroller receives the Short Message Service (SMS) depending upon the SMS the device should be on or off. If we monitor the status of the particular devices we send one more SMS. In this GSM BASED WIRELESS HOME APPLICATION MONITORING AND CONTROL SYSTEM project we are using the relay. Here the relay can be act as a switch for the corresponding device.

This automation system can also be used for small scale & large scale industrial applications with small modifications. It will sense temperature, pressure, humidity and transmit to remote station via GSM channel. 

SOFTWARE Required: Embedded ‘C’ programming

TOOLS Required: Keil tool, Flash magic software tool.

OUTPUT DEVICE: LPC 2148(ARM7) Microcontroller.

APPLICATIONS: Home and office appliances.

ADVANTAGES: It can be used in rural areas, Power usage is very less, using as Wireless home applications.

BLOCK DIAGRAM: GSM MODULE, LPC2148( ARM7) MICROCONTROLLER, POWER SUPPLY, DEVICE1, LCD, RELAY, GSM MOBILE

Download GSM based wireless home application monitoring and control system

Posted on

A REAL TIME PRECRASH VEHICLE DETECTION SYSTEM (ABSTRACT)

A REAL TIME PRECRASH VEHICLE DETECTION SYSTEM (ABSTRACT) With the growth of vehicles in large number and with the same Narrow size road it is very difficult for the driver to drive a vehicle safely without a crash on the road. If for a small fraction of time if a vehicle driven has missed his attention then it will result in crash of vehicle with front vehicle even if the vehicle is in small speed or no speed. In congested traffic sometimes a vehicle owner get frosted and he cant keep watch on vehicle in slow moving traffic. In such a situation this pre crash vehicle detection system proved to be a excellent system from preventing a crash.

Today many sensors are available for detection of pre crash between vehicles. We are using IR sensor system for detecting pre crash between vehicles. In our proposed system we are using a Infrared transmitter and infrared receiver combination system which is attached to a ARM based microcontroller board. A buzzer is also attached to a microcontroller based embedded board. The IR sensor system continuously sends signals and monitors any car or other obstacles are in front of car. The distance up to which IR sensor can work may be up to 1 meter. When any obstacle or vehicle detected by IR sensor system it will send signal to the ARM based embedded board. ARM based embedded board after receiving this signal send a signal to the Buzzer system which will work immediately. Vehicle drive can control his vehicle as per this buzzer signal when the vehicle is at 1 meter distance away from the front vehicle.

Programming Language: Embedded ‘C’ Programming Language

TOOLS: Keil tool, Flash magic tool.

TARGET DEVICE: LPC2148(ARM7)Microcontroller.

APPLICATIONS: Real time system to track the assets.

ADVANTAGES: Low price device, No Manual interaction,     Less Power consumption, secure & Reliable.

 BLOCK DIAGRAM: CAR, IR TX, IR RX,LPC2148(ARM7), LCD,POWER SUPPLY, BUZZER

Download A REAL TIME PRECRASH VEHICLE DETECTION SYSTEM (ABSTRACT)

Posted on

REAL TIME VEHICLE TRACKING SYSTEM (ABSTRACT)

REAL TIME VEHICLE TRACKING SYSTEM  is the Embedded system Final Year Project, The main objective of this project is to tracking the vehicles in Real Time. The main function used in this project are GPS (global positioning system) , Geographic Information System (GIS), GSM (Global System for Mobile Communication, REGULATED POWER SUPPLY,  ARM MICRO CONTROLLER,  LCD DISPLAY

SOFTWARE Requirements : Embedded ‘C’ Programming Language

TOOLS Required: Keil Tool, Flash magic Tool

OUTPUT DEVICE: LPC2148(ARM7) Microcontroller

APPLICATIONS: Tracking vehicle position.

Features: Low cost Device, Flexible,  automated operation, less Power consumption.

Download REAL TIME VEHICLE TRACKING SYSTEM (ABSTRACT)