Posts

Posted on

Emissions Reduction Using Hydrogen from Plasmatron Fuel Converters

Today, pollution is a major danger to the Environment. Vehicular exhaust is responsible for the pollution. PLASMATRON fuel converter technology is the new technique that reduces the concentration levels of emissions.

Engineers have added hydrogen to gasoline to make an engine run cleaner and efficiently. It is suitable for fuel pretreatment and for exhaust after-treatment applications. The Emission control methods are Fuel pre-treatment and Exhaust after-treatment. The Plasmatron fuel converters are Thermal type and Low current type.

This EMISSIONS REDUCTION USING HYDROGEN FROM PLASMATRON FUEL CONVERTERS project describes a block diagram of Diesel Engine Emissions Aftertreatment Concept which is explained in two ways, normal operation and regeneration. In normal operation, the oxygen rich is exhausted from engine which is absorbed by the catalyst and that cleans the exhaust. But in regeneration, there is a plasmatron reformer which is a diesel fuel. It is rich with hydrogen gas to have clean exhaust.

The energy given by the plasma facilitates partial oxidation reactions with negligible soot production. Under ideal stoichiometric conditions, the partial oxidation reaction is given by CnHm + n/2 O2 nCO +m/2 H2. It gives continuous ignition at the entrance of the fuel in the gasification of fuel.

 It increases gasoline engine efficiency by 20 to 25%. It potentially reduces U.S. oil imports by 1.5 million barrels per day. It also reduces diesel engine which exhaust emissions by 90%. It needs modest engine modifications with no major redesign of the vehicle.

Conclusion:

This project concludes about the pollution which is a major threat to the Environment today. So PLASMATRON fuel technology decreases the concentration levels of the emissions.

Download EMISSIONS REDUCTION USING HYDROGEN FROM PLASMATRON FUEL CONVERTERS

Posted on

Mech Project & Ppt on Design and Analysis of a Two Stroke Petrol Engine Test Rig

The two stroke engine completes its cycle of operation in one revolution of the crankshaft or two strokes of the piston. The intake and exhaust processes of four stroke engine are look after by the incoming fresh charge. It is compressed in the crank case or by means of a separate blower whereas the engine piston is present near the bottom dead centre. The engine piston compresses the fresh charge and expands the product of combustion.

The mechanical construction is simplified with the help of the piston in two stroke engines as a slide valve in conjunction. It is along with intake and exhaust ports to cuts of the cylinder side.

 The petrol engine works on two strokes. The first one is Stroke 1A, Piston BDC (Bottom Dead Centre is at the lowest point within the cylinder. The air, petrol, and oil mixture is forced into the cylinder and exhaust gases are made to drive out. The second one is Stroke 1B where the piston moves upwards to cover the air intake and exhaust ports closing them.

The engine ignites fuel in the upward stroke and hence there are two strokes for ignition of fuel and they are known as upward and downward stroke. If the piston moves in upward direction from down to top in the first stroke then the air and fuel mixture compressed and ignited with a spark plug where as upward stroke comes to end.

Thermocouples device is mounted on different fields of the engine that measures stroke temperatures. Engine speed indicator measures the number of revolution per minute of the engine shaft. It is done with the help of a speed sensor displayed in the digital indicator.

Conclusion:

This Mech Project & PPT on DESIGN AND ANALYSIS OF A TWO STROKE PETROL ENGINE TEST RIG Mechanical project is built up for laboratory purpose to check the performance of two stroke petrol engines at environmental conditions. 

Download Mech Project & Ppt on Design and Analysis of a Two Stroke Petrol Engine Test Rig

Posted on

Online Analysis on Node Performance Java Project

Online Analysis on Node performance java project explains about implementing embedded gossip with two other monitoring techniques for checking online performance at each node and improves performance of routing. This paper covers introduction to embedded gossip, existing system details and proposed system features with hardware and software requirements.

In existing system it is tough to analyze performance for large scale and long running applications. This system uses standard trace based and statistical methods which are not efficient to trace online performance.

Embedded gossip is a light weight application which can analyze online performance and pinging back performance information through online and each process is analyzed accurately with weekly analysis on entire application. For improving system features EG-based global adaptation system is integrated in to this system.


download Online Analysis on Node Performance Java  project Report

Posted on

Data Accessibility for Engineering Distributed Systems

Data accessibility for engineering distributed systems project explains about accessing information from different nodes and providing data accessibility for large scale distributed system. This paper explains covers introduction to problem and provide solution for existing problem and proposed system features with hardware and software requirements. In present scenario there are many engineering applications which used data from different sources. So there is need to provide data intensive applications by accessing information from different nodes with computational capabilities. This paper will introduce to notion of accessibility for gather both availability and performance. There is needed to look at both node capability and method to allocate jobs to different applications. There are certain scenarios where faster node should face load handling problem when neighbor node is slow. This proposed system uses accessibility aware techniques though which we can choose nodes which can accurately access remote data resource. This method can even work in less observation conditions. This system is less expensive and gives high performance compared to existing system.

download Data Accessibility for Engineering distributed systems project Report.

Posted on

Dynamic Search Algorithm for Intelligent Message Routing

The dynamic search algorithm for the intelligent message routing project explains implementing a new algorithm that can route messages accurately by performing search queries at the node level. This paper covers an introduction to the problem in the present network and an analysis of the new algorithm, existing system details, and proposed system features with hardware and software requirements.

At present peer to peer network node is used to route messages but they do not hold any global information like information about other nodes searching features they don’t work intelligently. The existing peer-to-peer system is an unstructured network that doesn’t hold global information for routing messages accurately. Flooding and RW are two searching algorithms used which perform blindly by sending messages to different nodes without any accurate query.

This proposed system works on a Dynamic search algorithm that works on a knowledge-based search mechanism. This mechanism will increase search performance and it works 25 times faster than flooding and RW algorithm in power law graphs and 125 times faster in bimodal topology.

download Dynamic Search Algorithm For Intelligent Message Routing project report.

Posted on

CDN for Genome Sequence Similarity Detection

Content distribution network for genome sequence similarity detection project explains about implementing new architecture and procedure for improving genome similarity search services. This paper covers introduction to sequence similarity problem in present network and provide a novel procedure to solve this problem by implementing content distribution network, existing system details and proposed system details and hardware and software requirement. In present scenario as number of services are increasing and request rate is high and in order to handle this high flow requests preset Beowulf architecture cannot handle accurately. As the data base size is increasing accuracy in sequence similarity detection had become a tough task. In order to solve this problem many techniques are introduced on detecting sequence similarity. All these new techniques are developed on gnome sequence search, so demand of its usage had increased. This paper explains a new method in which sequence search requests are treated as content request in gnome database and sequence similarity detection. This is done by using content distribution system. This project will developed different methods for constructing CDN for handling sequence similarity detection. This project can increase scalability at nodes in the network which can be achieved with low cost.

download CDN For Genome Sequence Similarity Detection java project report.

Posted on

Design & Fabrication of Suspension Systems Mech Project Report

The car suspension maximizes the friction between the road surface and the tires to give steering stability with good handling which ensure soothe of the passengers. This article explores about the working of car suspensions and design of suspensions in the future.

 If a road is flat then suspensions are not necessary. As per Newton’s laws of motion, force has both magnitude and direction. The road with bump causes the wheel to move up and down perpendicular to the road surface.

The magnitude depends on striking of wheel to a giant bump or a tiny speck and the car wheels experience vertical acceleration when it passes over a bump.

The study of the forces on a moving car is known as vehicle dynamics and many automobile engineers determine the dynamics of a moving car from two concepts such as Ride, the car’s ability to comfort a bumpy road and Handling, the car’s ability to safely brake, accelerate, and corner.

The suspension of a car is the part of the chassis that comprises important systems. This system includes The frame is a structural load-carrying component to support the car’s engine and body,

There are suspensions used in the vehicles which are Dependent Front Suspensions, Independent Front Suspensions, Dependent Rear Suspensions, and Independent Rear Suspensions.

Conclusion:

This Design & Fabrication of Suspension Systems Mech Project Report concludes on the working of car suspensions and design of suspensions which maximize the friction between the road surface and the tires for the comfort of passengers.

Download DESIGN & FABRICATION OF SUSPENSION SYSTEMS Mech Project Report

Posted on

Cloud Computing Seminar Topic

What is Cloud Computing

Cloud computing is a service that helps you to perform the tasks over the Internet. The users can access resources as they need them.

The term “ Cloud” refers the internet.

Cloud computing consists of hardware and software available on the internet managed by third party services
The authorized user can reach the cloud for resources when they need it.
The users can manage their data in cloud by storing it in various devices.
It is one of the best way to run business.
The data stored in the cloud are accessed by the authenticated users via passwords or tokens
The users just ‘Plug in’ and access the resources.
The company or the individuals are paying for not using the system but now they can pay only for the computing power and services they use.
The online storage is safe and secured.
You just need the personal computer with internet connection.
You need to have access to the cloud services to make use of it.
Put whatever you want inside the cloud or make use of servers, software’s, etc., you need.
Disconnect it once you have done and release it back to the cloud.
Pay for the server utilized, processing  power used and bandwidth consumed.

Best Example for Cloud Computing

Electricity Bill
 Turn on your lights and meter starts running. Once it is switched off, meter stops.
You will pay only for the power utilized.

The same concept applies in the Cloud Computing.

“ Pay for what you use”

Types of cloud

Public Cloud- The cloud is available to all the users to utilize the resources. E.g., Google AppEngine, etc.
Private Cloud- The cloud will be available with in the organization, not visible to external users.
Hybrid Cloud- Combination of both Public (External) and Private( Internal) Cloud

Levels of Cloud Computing

There are three levels of Cloud Computing and are as follows:

Applications in the Cloud

Platforms in the Cloud
Infrastructure in the Cloud

Applications in the Cloud

The applications hosted in the Internet are offered as a service
The user can sign up for and use without any concern about the computing power and storage capacity
Multi- users can access applications at the same time
No installation or Upgrades required
E.g., Gmail, Yahoo Mail, Wikipedia.etc.,

Platforms in the Cloud

The platforms are offered as a service in Cloud
Develop your own code through web browser and upload it into the cloud to deploy it.
The code will magically run somewhere in the cloud without any server, Operating System or even without databases
If the code grows, the cloud automatically scales up and down, to match the demand.
No infrastructure cost and can deploy the application instantly

Infrastructure in the Cloud

The Hardware and Data centers are offered as a services in the Cloud.
With Cloud Computing, No need to spend time and costs to set up the Infrastructure.
You can own your own Virtual data center for storage by keeping costs to a minimum.
No physical location of the resources, no maintenance cost and no operating cost.

Advantages

It is highly reliable, stable and easy to use
It reduces the capital costs and operation costs for the company.
It increases the Productivity and improves Compliance.
Finally, it reduces the overall cost and helps you to keep the upfront costs to a minimum.
Download Cloud Computing Seminar Topic
Posted on

Java Project On Improving Peer-Peer Streaming Output

Improving peer-peer streaming output java project explains about developing a new architecture for optimizing the throughput of data driven peer-peer streaming. This paper covers introduction to new architecture, existing system features compared with proposed system features and hardware and software requirements. Main idea for developing this architecture is to share peers can share few of their resources with system. With this method overall performance can be increased and system capacity will be improved and provide option for serving maximum number of clients. In recent times data streaming has grown rapidly so there is need to improve performance. In this architecture each individual node is connected with its neighbor node for exchanging information. In present scenario there was no accurate procedure to improving performance of existing protocol. Though there are few analysis on this issue but they mainly depend on maximizing the throughput of overall delay. This paper deals with analytical study on scheduling problem in data streaming and provide solution with less implementation cost. This system uses global optimal scheduling procedure and data streaming model to improve throughput. Video coding can be integrated in to data driving protocol and improve algorithm to deal with end-host heterogeneity.

download Java Project On improving peer-peer Streaming Output Project  Report.

Posted on

Peer-Peer Network Protocol for Efficient Subset Search

Peer to peer network protocol for efficient subset search project explains about new technique in peer to peer network called plexus which is used to improve efficient searching mechanism and efficient method for advertising bit sequence. This paper covers introduction to plexus technology with existing system features compared with proposed system features and hardware and software requirements. In Existing peer to peer system distributed hash table routing or hint based routing mechanism are used for searching. Which do not provide solution to DPM problem? Due to these reasons there is no accuracy in peer to peer search mechanism. Proposed system works on Error correction Codec and query search methods for providing accuracy in peer to peer search mechanism. Plexus visit 1 to 2% of super peers and resolve query with 97% accuracy. Plexus is developed in java and MS Access platform.

download Peer-Peer Network Protocol for Efficient Subset Search Project  Report.