Category: CSE Paper Presentations

The world in today’s generation is where transportation is very important in such thing the size of the involvement of the data and the communicating systems that will be the instrument to measure the pressure of country’s development. This is named as the Informational Society in the post industrial area.

Some people think that Knowledge is only the power and the single and only key to reach the success development. It is very valuable input or the base resource distinguishing various activities. An approach to perfect information data at the perfect timing will bring a new way to research development and materials.

The main fulfillment process is the application of informational technology sectors. The aim of establishing an IT acquainted government can never be accomplished without forming ability in human development resources. In order to get the human resource development these subsequent procedures were planned to take in consideration like every single syllabus of an IT would be made essential to every graduation courses here.

This includes courses like MCA, MBA, BCA, DCA etc… and also in post graduates courses like M. Tech, B.E etc… National institute of technology NIT has its personal separate department for B.Tech in Computer Science, Engineering and PG level courses. There are also few govt. organizations which provide job return programs like DOEACC which has a very great scope all over India. They also organize IT alternation for their employees. Giving support to the IT training centers which are privately opened with the great importance to the district Head Quarters and other small towns too. Special Informational Techno Programs are being brought into existence for the backward class citizens. The govt. will look upon the center which provides the best IT education. Internet cafes will be built in the University and colleges.

This will be a great establishment in the For the Institutes in IT field.  We hope that in near future it will be a developed in the field of Information Technology.

Download  Higher Education Opportunities in the Field of Information Technology .

Introduction to  Seminar Topic on Cor Dect Wireless Access System:

COR-DECT is a wireless .NET supportable system which is established by Midas Communication Technologies and the IIT’s. It allows a complete approach for the latest telecommunications resolution.

CorDect is depended on DECT standard specification. It is made for giving a wireless access to many such networks and is types. It is used to connect wireless to PSTN and also to internet via local loop system. It is also used by the well known Communication Company called BSNL. BSNL uses it for the wireless connection between the Telephone exchange and the end customer users. The WLL technology has two different bandwidth called as GSM and CDMA for data transferring.

This techno does not need the frequency planning. It is mainly established to allow many users to access the same spectrum at the same time. It Mixes or fusions 20 frequencies every 10 time slots to make the user access around 120 channels. These channels can be used again and again and are restrict only by the total no. of installation.

The main objective of the DECT is to designate to make less costing terminals, heavy traffic calls levels and much more. The possible architectures that the DECT are compared to are the dynamic channel selection, microcellular architecture, channels with many rates etc… 

It gives a high array of features and services which contains regular access of internet. The CorDECT is evolving its capabilities. Latest products that will keep CorDECT a step forward then WLL systems, as the 3G WLL system of choice for operators worldwide.  DECT can also be used in DPRS called as DECT Packet Radio Service. Internet access is distinguished by blow of packets with long time of inaction. The CorDECT team is preparing new products to take CorDECT to higher stages by its performance. So, current versions will be updated. This will guarantee that CorDECT remains the most less cost persuasive ever.

Download  Latest Wireless Communication Seminar Topic on Cor Dect Wireless Access System.

Introduction to Seminar Topic on Magnetic Random Access Memory:

Magnetic Random Access Memory is a non-Volatile random access memory which uses magnetic storage system to refer the saved data. It uses a material named as Magneto-resistive which has an existence of magnetic field. This magnetic layer is created by permollay thin layer where the crossroads of sense line and word line in a bit of memory.

It has some general attributes such as Non-Volatility, low write energy, speedy writing, uncountable cycling etc… The growth of MRAM was based on other contains like AMR, GMR, SDT and much more. AMR material is handled by the magnetic hysteresis and memories are also accommodated on an integrated memory chips. And in GMR the resistant of some materials falls severely due to magnetic field is used there. The main work of GMR is to measure the angle difference between the Magnetism.

There are two procedures of data storage such as 2-D magnetic and 1-D magnetic selection. The 2-D magnetic is the old scheme which rejects the serial memories such as disk and tapes. Now a day’s every MRAM uses the 2-D magnetic selection scheme. The PSV concepts also use the 2-D magnetic selection. 1-D is the new scheme which is invented recently, here a small per memory is used to write and a very small cell current are used for reading purpose. The 1-D MRAM is very symmetrical to the DRAM concept of Ram.

Some tips for access the data are the inductive readout scheme where in the beginning time memories used the inductive readout scheme such as the state of 0 and 1. Second is the magnetoresistive readout scheme as this scheme is currently used in now a day’s MRAM’s.

Advantages of MRAM are uncountable cycling ability, speedy read and write and nonvolatile technologies that were defined earlier. Uses of low power for writing and other things. MRAM is invulnerable radiation device so it can be used a high temperature also. MRAM is also a great topic which is used by the IBM projects also.

Download  Seminar Topic and Report on Magnetic Random Access Memory.

Introduction to Technical Seminar Latest Topic on BACO Algorithm:

It refers a BACO algorithm which selects an appropriate resource to assassinate the jobs according to resource status. The Local and Global pheromone newly feeds the functions to correspond the system load. The local aroma function notifies the status of the resource after the job responsibility.

Global pheromone function notifies the status of each resource for the entire job after the job responsibilities. It suggests the Job Scheduler the latest information of all resource for the next jobs responsibilities. The exploratory shows that BACO is applicable to symmetry the full system load.

We will analyze whether there are any other places of activity which we have to see that the definitions of pheromone update functions. We will also try to apply BACO algorithm to various grid computing applications. When a job is to be allowed to a resource for execution, we must be certain that all its precedent jobs running on other resources have been completed.

Lastly, this paper concentrates on the computing grid. We may twist the pheromone indicator and pheromone update functions for the data grid to consider the duplicate strategy to select or anticipate which resources have more storage or are applicable for file duplication by their latest status.

Download  Technical Seminar Latest Topic on BACO Algorithm.

Introduction to Final Term Paper for CSE on Concept of Paging:

Paging is a memory management blueprint from which a system can save and recover data from a secondary storage device for in need to main memory. It recovers or retrieves the data from the storage devices which are called as pages. It also allows the phenomenal address space in the process in contact. In short Paging is a process which is completely based on Random Access Memory i.e. the RAM. It also has the situation named as page fault in which the user tries to operate the functions that are not in contact with the RAM. The OS must take full responsibility to handle such type of situations.

It also has the Address translation scheme in which address are created by the central processing unit and is later sub divided like page number, page offset etc…

Secondly is the Page table implementation in which the page tables can store and it contains 1 mega entries each of 4 bytes. It can also access the Virtual memory reference one to get the page table and second to get the data from it. To solve such issues a high level cache is set to the pages named as TLB. TLB is such a buffer which speedily improves the hardware system. TLB has the data entries that are currently in use.

Now the LRU Algorithm as this is the excellent algorithm which has a concept like FIFO, Frame locking as this topic uses the Kernel in Lock frames and also the control of key structure. The replacement to this is the CLOCK Algorithm which is used in Mastics OS.

Main Difference between the swap and paging is swapper takes and executes the full process or pages and paging handles or takes single pages at a time. So in application paging we use the paging instead of the swapper.

Memory protection is the most important thing which is put in action by giving the protection to a single bit frame. 

Download  Final Term Paper for CSE on Concept of Paging.

Introduction to Seminar Topic on Computerized Paper Evaluation Using Neutral Network:

This is the system used for the evaluation of examination papers. This project helps the students to enter the questions to the system in the limit situation and answer to that questions are given or calculated at the same time. The answer to the questions is given or judged according to the new grammar methods. Due to this students can start their specification earlier but it also has some demerits too. This is done by connecting the system to the knowledge related to every subject. This exam is mainly based on the objective type but sometimes definitive questions can also be asked.

Now a day’s computers are meant for use of educational purpose. The increment of internet services has given a boost to the knowledge such as distance education, eBooks learning etc… But it also has some dis-advantages too. Distance education has being blocked due to less availability of system judgments.

This proposed system is fully computerized and did not require any manual work like previous system which takes a lot time to execute the answer. This proposed system is based on completely neutral net layers. It specifies all the requirements needed for the proposed system.

The demerits of this system is that students must learn few new methods of the new grammar, the system cannot be a 100% free from errors at last it also has some limitations. Mentality questions cannot be answered by the computer and the last is subjects like Math’s and English cannot be judged from this computers or software’s.

It also has a few merits followed by the demerits that the distance education has no capabilities to the exam system. And if such model is launched the option like distance education will touch the range of the skies. As the way to development of this system is still in process and it will serve a great handy tool for every students.

Download  Seminar Topic on Computerized Paper Evaluation Using Neutral Network .

Introduction to Technical Seminar Topics on Computer Viruses Detection and Removal:

Computer Viruses are such a kind of thing or a file that completely destroys or damages the full computer system. Viruses mainly spread through infected files that are corrupted or contain virus. And also it spreads from internet like cookies and Trojans etc… Here we will see the Detection and removal and protection methods of viruses.

Viruses can be removed being detected by using software called Antivirus. It is the most active method to keep virus away from systems. But not the experts can also tell that antivirus can protect the system from virus a total cent percent. It is just for our convenience that about 99% of the system is safe from viruses.

Main question arises is which anti-virus program is better. The answer to it is any antivirus which helps the user to keep the system virus free. Viruses mostly spreads and firstly enter the BOOT files of the system, then to the BIOS and then to the other files of the system. If antivirus which the user is using does removes the virus from the files the best way to detect and remove is to do a BOOT scan. It causes no damage and removes near about cent percent virus.

Unknown virus that is mainly detected from an antivirus is TSR Virus, BOOT virus, File virus and Micro virus. TSR virus is such virus which never gets detected by an antivirus when it is in presence, it only can be removed when PC is fully formatted. If anyone not sure about the unfamiliar working of the computer best prefer is to consult a computer programmer for help in need.

Remember to keep a backup copy of the DOS file and the antivirus for Booting purpose.  BOOT viruses damage the boot files of the system that unable the system to boot correctly. File viruses are available in the documents and simplest way to find it is a file like .EXE or .COM. Macros viruses are such which completely disables the Menu Items on the system.

Download  Technical Seminar Topics for CSE on Computer Viruses Detection and Removal .

Introduction to Seminar Topic on Wireless Sensor Networks:

There are many fields where sensors can be used. It is used to detect fire and rain detection and can be used in health care. Sensors greatly contribute to electricity production through coal. They can be used in solar energy collection which track the sun rays to track the power and they can be turn on and off by using sensors.

The smart grid is an innovation that has the potential to revolutionize the transmission, distribution and conservation of energy. Defining the smart grid is not easy as it too hard to define but it can be in two ways its characteristic from solution perspective are more efficient energy routing, better control of energy, two way flow of energy. The new and advanced grids allow more efficient energy transmission.

Smart devices and smart metering: – It includes sensors and sensors network and it can be used at multiple points along grids. They play a vital role in remote monitoring area. Electricity providers get better picture of energy customer’s. Energy can be priced according to real-time cost. Customers are aware of the real cost of power bills. It also includes system based on artificial intelligence and semi-autonomous software.

Advanced control system: – Advanced control smart grid can monitor and control essential elements of this grid. It uses computer based algorithm for data collection and analysis. In new subsystem the information is available in the whole grid and thus provides better power transmission. In this faults can be detected at faster rate and its repairing time can be reduced.

Conclusion: – This report gives overview of sensors and sensors network and its selected field of application. There is many technologies which are at early stage of developing. Many programs are done to increase the use of sensors and contribute to industry wide solution.

Download  Seminar Topic on Wireless Sensor Networks .

Introduction to Integrated Transmitters Seminar Topic:

It is very necessary to have the communication link between the space crafts and the satellite in the space so that infrastructure of the space works properly.  In space all the data receiving satellites are linked with each other and they are placed in the LEO (low earth orbit) around 300-1000 km of altitude.

They are connected to the integrated transmitters of the earth for data transmission and exchange. Theses integrated transmitters are placed on the number of earth station on the earth. They form the orbit link between the satellites for relaying the data. They almost cover the 36000 km of the earth perimeter. 

For linking the satellites we generally use the appropriate wave length and the polarization is kept proper for better link connection. Wavelength should be appropriate to meet the requirement and should be polarized. To provide an asymmetric link a link budgets should be used.

Integrated transmitters have two reluctant piezo actuators connected to each other in parallel. They are connected to collimator and capacities position sensor connected to each other with the help of switch. They are connected with mono-mode flexible fiber that connects all the components in the transmitters these two actuators are connected with two opt mechanical Switch.

These fibers are connected to anamorphosers that have collimator and focuser and also active emitter.  These anamorphosers have LED connected to them for giving signal.

On the other side redundant emitter are connected, this emitter also have LEDS connected to them. 

Download  Seminar Report on Integrated Transmitters .