Posts

Posted on

Construction of Touch Screen Based Portable Digital Clock

For any application in the industries there are many parameters to be handled. In Construction Of Touch Screen Based Portable Digital Clock project we are concentrating RTC (Real Time Clock).RTC sends the time and date information to the microcontroller continuously. The microcontroller receives the values and sends the corresponding values to the Graphic LCD to display.

We are using DS1307 which is a Real Time Clock. Micro Controller is used to read the values from DS 1307. DS1307 is interfaced to the Microcontroller to display the date and time. TOUCHSCREEN with GRAPHIC LCD used to edit and display the date and time values according to our requirement. 

download  Construction Of Touch Screen Based Portable Digital Clock  project information.

Posted on

Touch Screen Operated Liquid Dispensing System

Touch Screen Operated Liquid Dispensing System application need to handle different parameters that to be handled. This projects uses temperature sensors. Sensors are located at different points to sense temperature variations. Micro controller will handle information from sensors for further processing. Graphic LCD display is used for displaying messages.

In this process as we have to reach our requirement we assign a certain Set-Points for the sensor to monitor the temperature (Ex; Temperature-39 degrees). Based on temperature variations motor operations will set on or off.If the value from the sensor gets below the Set point, the microcontroller drives the heater ‘ON’ and starts the heating to reach the set point.  This is a cyclic process. Touch screen is used to set the Set-Points for the sensor to monitor.

A typical graphics LCD system is shown in Figure 1. The system consists of a microcontroller, a LCD controller (digital-control logic, optional graphic accelerator, image buffer, gate driver), and a LCD glass. 

download Touch Screen Operated Liquid Dispensing System  project information.

Posted on

Touch Screen Based Nurse/Attendant Calling System For Physically Impaired

The aim of Touch Screen Based Nurse/Attendant Calling System For Physically Impaired project is to design and construction of a module used for patient who are unable to move . it  control the buzzer/light indication by a simple touch   through touch screen.    The project was divided into three phases. The First phase is to demonstrate the application of touch screen. The second phase of the project attempts controlling and display data on Graphic lcd and the third phase of the project is to control the devices(buzzer/lamp). 

A typical graphics LCD system is shown in Figure 1. The system consists of a microcontroller, a LCD controller (digital-control logic, optional graphic accelerator, image buffer, gate driver), and a LCD glass. 

Devices used in this project.

Micro controller.

Digital control

logic Image

Buffer

Graphic Accelerator

Gate Driver

 LCD Glass

 ATMGA32 micro controller

 Driver

 buzzer

lamp

power supply

download Touch Screen Based Nurse/Attendant Calling System For Physically Impaired project information.

Posted on

Touch Screen Based Advanced Home Automation System For Next Generation Apartments Project

The aim of Touch Screen Based Advanced Home Automation System For Next Generation Apartments project is to design and construction of a module to control the home appliances  through touch screen.The project was divided into three phases. The First phase is to demonstrate the application of touch screen home automation. The second phase of the project attempts controlling and display data on Graphic lcd and the third phase of the project is to control the appliances to the applications.A typical graphics LCD system is shown in Figure 1. The system consists of a microcontroller, a LCD controller (digital-control logic, optional graphic accelerator, image buffer, gate driver), and a LCD glass.

 In current project a system is designed to control the home appliances on the touch screen and graphics. This project demonstrates how touch screen can be easily interfaced to real world to control operation of complex systems like home automation.Below image shows the block diagram.

download Touch Screen Based Advanced Home Automation System For Next Generation Apartments Project PROJECT.

Posted on

FPRS Based School Management System (Abstract)

The main objective of this FPRS Based School Management System project is to develop an embedded system, which will record the time and attendance of a student in a school or college using finger print recognition.

          Whenever the students enters the school he puts his finger on the embedded system, then the embedded system will recognize the student by comparing his details with the stored data, it will register time of entry and attendance using the internal RTC of an LPC2148 microcontroller.

The system can work standalone and can also be integrated to a computer using RS-232 port. The complete code for the embedded system is going to be developed using C-Language. 

The main advantage of this project is more secure and it can avoids unauthorized members entry inside school,college or university gate. 

download FPRS Based School Management System Embedded Projects Abstract

Posted on

Design and Development of FPRS, ZIGBEE Based Passport Verification Abstract

 By using this Design and Development of FPRS, ZIGBEE Based Passport Verification technique the details of the person will be stored and recognized by the fingerprint reorganization system and information will be stored in the microcontroller’s memory. Person details will be checked by using FPRS module and information will be displayed on the LCD and sends to the immigration room through Zigbee based wireless technology.

Devices used in this projects are 

  • FINGER PRINT
  • FINGER PRINT READER MODULE
  • LPC2148 (ARM7) MICRO CONTROLER
  • ZIGBEE
  • PERSONAL COMPUTER
  • VOLTAGE LEVEL CONVERTER

download Design and Development of FPRS, ZIGBEE Based Passport Verification Abstract

Posted on

FPRS Based Visitor Control For Secure Areas (Abstract)

This Project “Design and development of FPRS based visitor control for secured areas” is a reliable circuit that takes over the task of counting number of visitors very accurately and control the visitors

The main objective of this Final Year Project Report is to develop an access control system which will authenticate the users using FPRS and users can access using the embedded system. It can be useful in book tracking in libraries, employ time, attendance and access control, product tracking in product assembly.

 In this Embedded System Project we are going to develop embedded system which will authenticate the users using FPRS, so that the unauthenticated users can be avoided. Every user’s finger prints stored in the memory. When the user comes to secured areas like Atomic/ defence Establishments, he can put the finger on reader to access the particular place, FPRS reader will detect the user automatically, it will give the access. . When any visitor visits the counter is incremented by one and if the count exceeds the maximum value the Buzzer rings. The total number of interruptions is also displayed on the LCD. This will completely automate the access control process.

This Project can be used in defense & Atomic space Establishments, The main advantage & best feature of this project is more secure and allows only selected people into the prohibited premises. 

download FPRS Based Visitor Control For Secure Areas  Embedded System Abstract

Posted on

Line Follower Robot embedded Project

Line Follow Robot project is developed using a 8 bit micro controller named AT89C52.  This robots path is followed using path of black and white line. Black line is drawn on white surface and white line is drawn under black surface.

This application uses infra red rays for wireless communication. Based on white and black light systems infra red system will take send signals. If light is fallen of black surface light will be reflected else it will not. Decision making is maintained by micro controller and the entire system will be under control of micro controller.

The micro controller used in this project contains 40 pins. Based on the signals that are generated from infra red rays movement of motors are controlled.

download Line Follower Robot embedded Project.

Posted on

High Speed Material Transferring Robot through Remote

High speed material Transferring Robot Through Remote projects main idea is to develop a robotic application which can look of the works where humans cannot take the challenge. This applications are mostly used in military, space fields.

For a robot it is obviously important that it can operate from batteries. Since the micro controller runs with 5V the motors also must work with 3-5V. Maintaining size of the project is important so we need to be look after that.

In this project micro controller is attached with two motors which will make the system more generic. All the logic is developed in the software. That means by changing the software you can change almost everything as you like.

APPLICATIONS:

Cutting

Dispensing

Machine Load / Unload

Machine Tending

Material Handling

Polishing

Sealing

download High Speed Material Transferring Robot through Remote Project.

Posted on

Design And Development Of FPRS, RFID Based Petro Card System (Abstract)

Design And Development Of FPRS, RFID Based Petro Card System using of Finger print based bio metric systems also increasing the secure areas.

In this RFID Based Petro Card System project, RFID cards are used as prepaid petro cards , Finger prints are used to check for the authorized person(use full for avoiding misusing by others when the card is lost) . Using this technique each card’s number is assigned with certain amount of money depending upon prepaid money in the microcontroller’s memory.

In the petrol bunks, the customer can use card he can pay the bill from the pre paid card. He put the card at the RFID Reader and need to show finger print at finger print module, then user enters the how much amount petrol getting in to vehicle through the keypad in litters. Then the embedded system reduces the amount from the card and shows balance on the LCD display.

This Embedded System Project can be used at petrol bunks & Avoids carrying money every time.

download Design And Development Of FPRS, RFID Based Petro Card System Embedded System Final Year Project Abstract