Automatic Street Light Intensity Control

WORKING PROCEDURE

230 V AC supply is given to the step-down transformer. This step-down transformer steps down the voltage to 12V. This voltage is given to the rectifier. The rectifier used here is the bridge rectifier  this is formed by the 4  1N4007 diodes.

This rectifier gives the pulsating dc as the out put. This consists of ac ripples in order to remove this ac ripples we are connecting 1000 micro farads capacitor from which ac ripples are grounded

The 12V dc supply coming out from the rectifier divides into 2 ways .from that one is given to the regulator and other is given to the MOSFET driver.

Thus this 12V supply which is given to the regulator this regulator is the 7805 voltage regulator these coverts 12V to 5V since the micro controller needs 5V

In this microcontroller, we write the logic program by using pulse width modulation logic & by taking LDR as a base.LDR is nothing but Light Dependent Resistor this is constructed by using cadmium material, It is operated when solar light is increasing along with it LDR increase a voltage generation within due to this resistance value is to be decreased.

Whatever voltage is generated in the LDR is passed to the micro controller based on this signal pulse width modulation is operated according to this, In pulse width modulation width is increases or decreases by depending upon the LDR.

When micro controller operates it gives the pulse width modulation signals. Whatever signal is generated in the micro controller is forwarded to the MOSFET driver.

If the transistor is on, it will pull down MOSFET voltage to ground so MOSFET becomes off. Likewise, if transistor is off, MOSFET conducts to make LEDs on.

Transformer Temperature Monitoring and Control Major Project

This Transformer Temperature Monitoring and Control project aims to continuously monitor the temperature of the transformer at the substation.

If the temperature increases beyond some critical limit, microcontroller will automatically start the cooling system for the substation.

The temperature sensor used in this project is NTC Thermistor which is interfaced with the LM3958 Comparator IC. It gives digital output to the microcontroller.

The microcontroller then takes the required action to turn on coolants through transistor driver. The relay driver circuit is basically current amplifier.

The Temperature Monitoring system is enabled with the alarm which is activated when the critical temperature value is sensed by the thermistor. In order to indicate the status of the operation, 16*2 LCD is used.

Software Tools:

1. Keil compiler
2. Embedded C Code
3. ucFlash

Hardware :

1. Microcontroller AT89S52.
2. Sensors- NTC Thermistor
3. LM358 Op-Amp Based Comparator
4. FAN Blower
5. RELAY
6. Buzzer
7. 16*2 LCD Display

Running Head: Genpact should find leadership skills while recruiting

Genpact should be able to find leadership skills in managers

Need of Leaders for way forward

A well-defined, well-coordinated and dedicated leadership team is essential for the smooth functioning of operations for any organization. The success of an organization depends on the attitude of which the employees are led i.e by efficient leaders who possess the skill set to stay poised at the time of emergency and act instantly. It will directly motivate the employees to work better and function better. Thus, enabling everyone to deliver results on time and in return keep the work progressing letting the organization to grow to create more opportunities. A company will grow if the employee grows which is linked to their performance and attitude they display along with the urge to learn and develop themselves for higher positions.

A problem regarding the lack of leadership:

For any organization or company the success of the company majorly is in the hands of the manager who leads the whole team. Lack of leadership qualities leads the project to be a failure and loose fame and confidence in performance of the individuals of the team. The manager is not fair in judging the capabilities of the individual performance due to factors like lack of communication, micromanagement, unclear expectations, intimidation and also the poor people skills. Not taking proper feedback from the team members leads to improper decisions which results in the failure when there are projects to deliver and being too friendly may affect the result of the project. There is no motivation from the manager fail to give credit to the employee. When a project was assigned the team members skills should always simplify the project for that recruitment process was hurried which resulted in failure of the project.

Company Profile:

Genpact is the information technology service company which began in 1997 and was one of the business unit in general electric. The company efficiently provided services business process services. The company managed services like financial and manufacturing business. The company became independent and started to serve clients outside general electric and worked very efficiently and helped in the growth of the company. The number of employees working in the company has been increased drastically. The company became publicly traded company and Genpact G satnad for generating business impact. It works on both industry solutions and enterprise solutions where in industry solutions deals with automotive, capital markets, energy, insurance, media and entertainment, telecommunications, hospitality and the enterprise solutions deals with aftermarket services, reengineering services, media, digital, analysis and research, human resource services, risk management services and many more. The company is mainly working on lean digital and its impacts in present business in all aspects.

Action defined

To tackle the problem. It should first be thoroughly assessed on whether the problem is lying in the manger because of the many team members or the manager themselves are incompetent. If there are many team members then potential managerial team members should be made managers and the work should be equally divided so that the manager will be able to give enough time to all the members. The managers should be given required trainings to improve their skills of handling a team /projects and people.

Upside/Downside

By having a good manager, it might be an investment to the company’s requirements and benefits in many ways. A good manager helps in guiding the knowledgeable workforce in a correct path. A well-trained and good manager should have an ability to motivate team members to be able to bring better outcomes. A realistic goal can be set by a well-trained manager, which helps in increasing the effectiveness and productivity of the company. This also enables a good relationship with the clients, which helps in bringing more projects to the company. A good manager can balance the work load by managing the time and making proper use of the available resources. A good manager will act immediately, by taking correct decisions and will be able to handle any type problem. A good manager learns from his failures, rather than being disappointed. The only Downside is to recruit a good manager by paying him with a good salary and also it might take longer time to recruit one.

Results defined

Promoting potential people will inspire people to stay with the company and to grow within. It will motivate employees to work better. Every team member may get more time from the manager thus improving the overall performance and also this will help the team members in learning the other managing skills from the manager for their better future. A good manager can be seen as a role model by the team members. A good manager is one who praises in public and criticizes in private.” Leadership is about taking responsibility, not making excuses.” A good manager can handle a stressful situation by taking all the responsibilities in successful completion of project.

 Recommendations

Genpact should scrutinize eligible managerial candidates from the employee population and necessary training should be given to them to make them feel confident about themselves and about the challenges they would be facing in the future. Training the subordinates will improve employees faith in the organization and would want to stay with the organization and grow within thus positively impacting the performance. “Learning is something that never ends, does not have a finish point and is something never regrettable “.

 Case Study

Amazon Inc founded in 1994, faced a similar issue where in lack of proper leadership team led to them losing a lot of their projects /business. They then analyzed the defaults and trained the eligible employees to take over major responsibilities which brought a rejuvenated spirit in the employees to function better. Alongside, they hired young individuals with similar thought process to mentor the existing employees and together they worked towards improving the overall quality to become one the most leading e- commerce websites today.

 Implementation Plan

Genpacts implementation should begin to analyze the job roles to be filled, and make a list of the number of employees required to work for each job role. The company need to make an analysis of the alignment of the number of managers for the number of employees and which role needs to be downsized so that the desired results could be achieved. If there is a short fall of leaders, the eligible employees should be given needed training, interviewed and promoted to new roles.

Genpact should also post the job ads on the web and encourage the current employees to refer some good candidates who would be a best fit to the required roles.

Conclusion:

It is rightly said that the organization which treats their employees well are popular in the market and mostly amongst its customers as they would have a lot of “work of mouth “ advertising will be directly beneficial to the organization. When hiring an employee the organization should assess them and check if they possess the leadership qualities the company runs upon. Time and again providing  extra training to trusted employees on their skill set will further increase their trust in the company and would make their long term plans to stay and grow within the organization thus inspiring themselves and others.

Online Examination .Net Project Synopsis

Abstract:

Online examination is a web application that is developed to make the examination process automated. This application establishes a connection between Institute and students. This application provides a platform for students to improve their attention toward examinations. This application provides questions with multiple choice. Students can answer the questions within the assigned time. As soon as the test is completed students can view the results which saves a lot of time and reduces the work of correction to the lectures.

Existing System:

A lot of copies of question papers have to be made. A lot of correction work hence the delay in giving the results. A lot of tabulation work for each subject results.

Proposed system:

In the proposed system students can sit at individual terminals and log in to write the exam in the given duration. This system performs correction, displays the results immediately, and also stores them in the database. This system provides the administrator with the facility to add new exams. This system provides the instructor to add questions in the exam and modify questions in the exam in a particular exam. This application takes care of the authentication of the administrator, instructor as well as student.

Modules:

Student:

the student will get registered by entering their details. Every student will be assigned a unique username and password to write the examination. The student can update his account and change his personal information. The student can start his exam after reading all the instructions. The student can get results soon after completing the exam.

Admin:

Admin gets login with a valid username and password. Admin can have complete access to the application. Admin can view the information of the students and faculty. Admin can view details of all users, single users, and results of all users. Admin can view and update details of a student

Conclusion:

Our project online examination was successful in providing better information for students in conducting the online examination. Our application takes the online test in an efficient manner and no time wasting for checking the paper. Our application simulator is to efficiently evaluate the candidate thoroughly through a fully automated system that not only saves a lot of time but also gives fast results.

Other Online Examination System Project Synopsis:

“Online Examination” is a web-based project that contains the results of an organization,
where the organization students can see their results using their personal details. this project is developed in HTML CSS And PHP Mysql.
This project makes the work efficient.

Objective Of This Project

This project aims to reduce the manual and paperwork for an organization. This project contains two panels.
Admin Panel is for organizations to manage the result and other details of the students.
Student or Result Panel is for students where they can see their results by entering the details provided by the organization.

Automatic Street Light Control System Project

This Automatic Street Light Control System project consists of LDR (Light Dependent Resistor) sensor interfaced with LM358 Comparator. When the LDR surface is illuminated with light, its resistance decreases whereas when there is no light falling on its surface, its resistance is infinite.

Depending upon that condition, comparator input changes, and hence corresponding output also changes. The output of the comparator is given to the microcontroller which monitors input and depending upon that takes proper action to switch on or off-street lights

Street Light Control Software Tools:

  1. Keil compiler
  2. Embedded C
  3. Orcad.

Hardware Tools:

  1. Microcontroller AT89S52.
  2. LM358 Comparator
  3. Transistor Driver
  4. Relay

Related Project:

Smart Street light management using IBM Watson

This project aims to control the intensity of the street lights with individual area control, total area control and dimming of the street lights as the street light plays a major role in safe road transport that if the street lights are turned on unnecessary there will be a huge loss in city’s electricity, As they consumption lots of power.

PROBLEM STATEMENT

1. To reduce power loss.
2. To make safe road transport.
3. Smart transport management.
4. Decrease human efforts.
5. Individual Area control.
6. Total Area control.
7. Dimming of lights.

Hardware: NODE MCU, BASIC SHIELD, IR SENSOR
Software: Arduino IDE, MIT App Inventor 2, IBM Watson Cloud Services

Wireless Petroleum Level Measurement Using Ultrasonic Digital Sensor

Liquid level indicator is a device meant to overcome the stress of opening reservoir or dipping rod into the tank for gauging the level of the liquid. The level indicator can be divided into three stages.

The sensing circuit, wireless transmitter & receiver, control circuitry. The sensing unit is isolated from the measurement & control circuitry.

The liquid level information is wirelessly transmitted which is then received at the receiver end. The level is shown on the LCD Interface.

The Petroleum Level Measurement system consists of ultrasonic digital sensors, Encoder IC, RF Transmitter, Decoder IC, RF Receiver, Microcontroller, LCD etc. The percentage of the levels is shown on the LCD Interface.

TRANSMITTER & RECEIVER

GSM based Vehicle Theft Intimation System

This GSM based Vehicle Theft Intimation System project aims at continuously monitors vehicle from some interrupt.

In case someone tries to steal the vehicle, micro controller will automatical the y shuts down the engine valve which is interfaced through relay driver ULN2003 IC. The relay driver circuit is basically current amplifier IC.

The Vehicle Theft Intimation System is enabled with the GSM Modem which sends SMS to the user mobile number which is stored in microcontoller memory.

SOFTWARE AND HARDWARE:

Software Tools:

1. Keil compiler
2. Embedded C Code
3. ucFlash

Hardware :

1. Microcontroller AT89S52.
2. Interrupt Switch
3. Current Driver ULN2003
4. RELAY

BLOCK DIAGRAM:

Metal Detector Embedded System Project

METAL DETECTOR

The main aim of this Metal Detector project is to detect the metal in the surroundings and alert the siren when the metal is found. This Embedded System project has the application in mines. People used to dig the ground to locate the mines underneath the ground. Using this metal detector, the mines can be found without digging.

The metal detector contains the metal detecting circuit, microcontroller and the buzzer. This metal detecting circuit comprises of RF oscillators and the operation of the circuit is based on a superheterodyning principle which is commonly used in superhet receivers. The output of the oscillator is a pulsating DC which is passed through a low-pass filter. It is then passed to the amplifier for amplification of the signal. For proper operation of the

The output of the oscillator is a pulsating DC which is passed through a low-pass filter. It is then passed to the amplifier for amplification of the signal. For proper operation of the circuit it is critical that frequencies of both the oscillators are the same so as to obtain zero beats in the absence of any metal in the near vicinity of the circuit. All these components are arranged on the single board.

Thus, when the user holds this circuit in his hand and move forward in search of a metal and when the metal is found, the output of the metal detecting circuit is given to the microcontroller. Thus, when the metal is found, the output of the metal detecting circuit changes and this change will be detected by the microcontroller. Thus, the microcontroller immediately alerts the siren.

Thus, when the metal is found, the output of the metal detecting circuit changes and this change will be detected by the microcontroller. Thus, the microcontroller immediately alerts the siren.

Software Tools:

1. Keil compiler
2. Orcad.

Hardware Tools:

1. Microcontroller AT89S52.
2. Metal detecting circuit
3. Buzzer

Block Diagram:

Wireless PC Data Logger for Smart Parking System

ABSTRACT

This project is about the new technique for solving parking problems and provide an easy method of parking. In the present scenario, people find it very difficult to park their vehicles in public places like shopping malls etc.

This project considers present parking system issues and provides a solution to develop advanced parking system. This project aims to design a vehicle parking system for the parking lot management. We are using here eight such parking slots.

This enables the car drivers to know the availability of parking space and to park it efficiently and easily with the help of LED Indicator Panel. In this project, we are implementing eight such parking lots. In this application IR transmitter and receivers are used to detect presence or absence of the vehicle. The information is then passed to the microcontroller which is then interfaced with the LED indicator panel to show the status of parking lots. The same information is transmitted to remote end using ZigBee technology. At the receiver, it is received and output is shown in PC terminal software.

The information is then passed to the microcontroller which is then interfaced with the LED indicator panel to show the status of parking lots. The same information is transmitted to remote end using ZigBee technology. At the receiver, it is received and output is shown in PC terminal software.

BLOCK DIAGRAM:

Temperature Monitoring Multi Bedded Hospital

ABSTRACT

This is a PC based temperature monitoring System using Zigbee communication. In this Temperature Monitoring Multi Bedded Hospital project, four temperature sensors in multiplexing mode are connected to the Atmega16 microcontroller which has eight channel in built ADC.

The temperature values of all the sensors are sent serially by the Atmega16 micro controller through Max 232 to the ZigBee trans-receiver module which then transmits this data wirelessly. The control room has another ZigBee module to receive this data which is connected to the communication port of the PC.

A Software “DAQ System” loaded on the PC takes these values and show them on its front panel, and also logs them to the data base “daq.mdb” One can set by the interactive way some parameters like set point i.e. the high limit on the computer screen. High limit and low limits are for alarm. When the temperature goes above high limit the alarm will be turned on.

The Temperature Monitoring application consists of microcontroller Atmega16, the temperature sensor (LM335), Current Driver ULN 2003 and Max232 for the serial interface. The on chip firmware controls reading of the ADC converter, receives commands from PC and sends the reading to PC.

We use the LM335 temperature sensor. The chip produces an output signal that is proportional to the Celsius temperature scale.

SOFTWARE :

• AVR STUDIO
• EMBEDDED C
• UCFLASH

HARDWARE :

• ATMEGA16 Microcontroller
• LM35 Temperature Sensor
• ULN2003 Current Driver
• Buzzer
• Max232 Interface

BLOCK DIAGRAM